WINONA VAN NORMAN SEAT AND GUIDE MACHINE PH6000. MACHINE IN GOOD CONDITION AND WORKING PROPERLY. NO TOOLING WITH THIS MACHINE. PLEASE CALL WITH ANY QUESTIONS. The item “WINONA VAN NORMAN PH6000 SEAT & GUIDE MACHINE AIR FLOAT TABLE CYLINDER HEAD” is in sale since Friday, December 30, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “engineparts2013″ and is located in Portland, Oregon. This item can be shipped to United States.

• Brand: WINONA VAN NORMAN
• MPN: PH6000
• Model: PH6000

I acquired this precision milling tool many years ago from a retired clockmaker, who used it for machining small metal parts required for his clock repair business. I dont know the exact origin but its nicely constructed and fitted with a motor that came from a Unimat DB 200 mini-lathe, which means it has been around awhile. The workpiece is held by a built-in pin-vise whose X/Y-position is controlled manually by vernier rotary controls; The Z-position of the cutting tool is set by a similar control on top of the vertical slide-rack. The unit occupies about one cubic foot in volume and weighs about 25 pounds so it fits compactly on a workbench. The overall condition is very good and all the racks move freely but the machine could use cleaning and oiling to achieve maximum smoothness. The spindle turns freely and comes with an assortment of tool-holding collets as shown in one of the photos. The item “Miniature 3-axis Vertical Milling Machine with Unimat DB 200 Lathe Motor” is in sale since Tuesday, January 03, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “rbdssd” and is located in Lansdale, Pennsylvania. This item can be shipped to United States.

HV6 Rotary Table, & Dividing Plate. Rotary Table Diameter :150 mm (6). Overall Height : 80 mm (3-1/4). Centre Height in Vertical Position: 105 mm. Worm- Gear Ratio- 1:90, which means that the 1 handle rotation shall turn the table by 4 Degrees. Table Graduated 360 Degrees, Resettable Dial & Handwheel graduated in seconds. Vernier scale is caliberated to 10 seconds. Centre Bore of the Table: 2 MT. 2 Oiling Points for a direct lubrication of the Table for longer life & better performance. Can be clamped in Horizontal as well Vertical Position. Supplied with Dividing Plate Set for Indexing & a Free Working Manual. Safety & Operation manual is also supplied. More Information about the Dividing Plate. Set of 3 dividing plates designed to fit our HV4 & HV6 Rotary Tables. Centre Hole of the Plate is 21 mm. Of Holes in each Plate. Plate A- 15, 16, 17, 18, 19, 20. Plate B- 21, 23, 27, 29, 31, 33. Plate C- 37, 39, 41, 47, 49. It is supplied with a brass stopper key, Bracket, Crank Handle & fixing screws. Weather conditions, flight situations, national holidays etc. Since we offer these in very competitive prices, we are bound to send them through ordinary posts which generally takes above mentioned time. Transit time includes normal weekdays. We assure you best solution in your favour. Have a Pleasant Day!! The item “Brand New HV6 Rotary Table & Dividing Plate Set for Milling Indexing+Free Manual” is in sale since Tuesday, July 05, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “hobbyist_workshoptools” and is located in Delhi, DELHI. This item can be shipped worldwide.

• Brand: Unbranded/Generic
• Country/Region of Manufacture: India
• MPN: Does Not Apply

Bolton Tools has been in the market for over 4 years. The customer response has been tremendous! People are very happy with our machine quality and price point. We offer some of the best prices in the country, we guarantee it! We are committed to our products and our customers. We would love for you to give us a call to discuss any of your machine needs. Pressed for space, but need a machine that can multitask? Then our Bolton Tools model AT520 could be the right one for you! The AT520 has a 12″ x 20″ lathe bed with a mill head over the bed. An ideal lathe mill combination for your small to mid sized jobs, the Bolton Tools AT520 may be the ultimate 3-in1 combo machine tool. Equipped with two 3/4 horse power motors, and a power cross feed, the AT520 is a real winner with the prototypers out there! Just learning the trade? Then the AT520 is one of the best combo lathes in its class. Bolton Tools has made this combo lathe mill drill for over 9 years and it has been a wonderful success from day one. Consider the AT520 when shopping for other combo lathes, you will NOT be disappointing in the quality packed into this mid sized lathe mill combo. Distance between centers:20. Dial Calibration on Crossfeed: 0.002. Dial Calibration on Leadscrew: 0.002. Lathe Chuck Mount: Bolt-On. Spindle Bore: 1.03. Swing over bed: 12. Swing over work table: 6-3/4. Thread pitch on processing: 11-40 1/n. Thread kinds on processing: 20. X-Axis Working Travel: 14. Y-Axis Working Travel: 8-1/2. Head Rotation: 360 degree. Head Travel: 3-1/5 Spindle Center to Support Column: 2-1/8. Spindle to Table Distance(Min-Max): 9-1/2″-12-3/5″. Tool Size Limits: 1. X-Axis Working Travel: 12-1/16. Voltage: 110 or 220 Volts. Weight: G:621 lb / N: 442 lb. Dimention: 49″ x 23″ x 38. If you have any questions regarding our products or services, please give us a chance for correction. Please do not leave a negative or neutral feedback. We will do our best to fix it. We care about our customers, and we strive to bring you the best customer experience ever. You will receive a response within 24 hours. Feed Back: If you are considering leaving negative or neutral feedback, please give us the opportunity to resolve the issue first. We will choose the appropriate carrier, according to the dimensions and weight of the product and recipient address. Our customer’s satisfaction is our main concern. All of our products are in brand new condition. The item “Bolton Tools 12 x 20 Metal Lathe Mill Drill Milling Combo Machine AT520″ is in sale since Tuesday, January 03, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Lathe”. The seller is “boltontools” and is located in Cerritos, California. This item can be shipped to United States, to Canada.

• Brand: Bolton Tools
• MPN: AT520
• Model: AT520

This Listing is for a. Features a DC Brushless Variable Speed Motor. And is BELT DRIVE for smooth and quiet operation! This machine uses 120V Standard Power! Here are some features of this milling machine. R8 Spindle Taper Standard, so it uses the most commonly available tooling. DC BRUSHLESS Variable Speed Motor, Powerful, Smooth and Reliable. Belt Drive from Motor to Spindle runs MUCH quieter than others, and eliminates any failure prone plastic gears. Main Colum is attached to the base with 4 bolts from the top, with a wide mounting surface for much more rigidity over other models in this size range. 3 Bolt Head Mount is now standard, for more rigidity when milling. 001 Readings on X and Y axis dials, with 10 threads per inch Leadscrews make it easier to cut accurately. Average time delivered is 2-7 days depending on how far from Pittsburgh you are, it could be a little longer in remote places but normally is very fast. DON’T FORGET TO CHECK OUT OUR ACCESSORIES THAT WE HAVE FOR THIS MACHINE INCLUDING R-8 COLLET SETS, 4 VISES, AND CLAMP KITS! Quality Machine Tools, 701 Parkway View Drive, Pittsburgh, PA 15205. We are machinists here too, so we know what we sell. This is really a top quality machine, and will last a long, long time. AND we are here for support too. We sell these machines regularly, we know them inside and out, and have been in business for many years, so if there is any question, we can help. Table Size 7-1/8″ x 27-1/2″. X Axis Travel 19. Y Axis Travel 7. Z Axis Travel (Head) 13. Max Drilling Capacity. Spindle Taper R8. Max Face Milling Capacity. 1/2″ (use 12mm or 7/16″ T Nut Clamping Kits to fit). Range of Spindle Speeds. Main Motor Horsepower – 1 HP. Voltage / Phase / Amps – 120 Volts, SINGLE Phase, 10 Amps. Approximate Machine Weight – 300 LBS. NO extra charge for residential or anything on these, as long as a truck can get to you, its covered. Check out our other auctions for more lathes and mills. The item “PM-25-MV VERTICAL BENCH TOP MILLING MACHINE, 3 YEAR WARRANTY FREE SHIPPING” is in sale since Wednesday, December 28, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “qualitymachinetools” and is located in Pittsburgh, Pennsylvania. This item can be shipped to United States, to Canada.

• Brand: Precision Matthews
• MPN: PM-25MV
• Country//Region of Manufacture: China

Enco 110 Volt Vertical Milling Machine. 8.25″ x 28.75″ Table. Overall in Very Good Condition. The item “Enco 110 Volt Vertical Milling Machine 8 x 28 Table 2 HP” is in sale since Thursday, September 15, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “bratex_llc” and is located in Johnson City, New York. This item can be shipped to United States.

• Brand: Enco
• MPN: Does Not Apply

4020 FADAL FANUC CONTROL WITH 4TH AXIS, 10,000 RPM, 24 TOOL CHANGER AND CHIP CONVEYOR. HAVE CLOSE THE BUSINESS AND RETIRING. WILL CONSIDER ANY REASONABLE OFFER, TO AVOID STORAGE. CHECK MY OTHER SITES I HAVE A TOTAL OF SIX MACHINES I MUST SALE. ALL ARE UNDER POWER FOR NOW AND ALL ARE IN EXCELLENT CONDITION. MUST VACATE THE PROPERTY BY 1/23/2017. I CAN ARRANGER FOR A RIGGER ON THIS END. The item “2007 CNC FADAL 4020 MIILL WITH FANUC CONTROL AND 4TH AXIS” is in sale since Tuesday, December 27, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “r-espinosa” and is located in Odessa, Texas. This item can be shipped to United States.

• Brand: Fadal
• Model: 4020

Volstro Rotary Offset Milling Attachment For Bridgeport Milling Machines Includes 7 Original Collets, Wrenches, & All Accessories Pictured R8 Shank Mounts to Any Milling Machine with a 3-3/8 Diameter Quill Includes Manual. Check my other auctions for more quality tools and machinery. If you are waiting for more auctions to end- just let us know. Powered by SixBit’s eCommerce Solution. The item “NICE VOLSTRO ROTARY OFFSET MILLING ATTACHEMENT FOR BRIDGEPORT + ACCESSORIES” is in sale since Friday, December 30, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “stm_surplus” and is located in Ellington, New York. This item can be shipped worldwide.

• Brand: Volstro
• MPN: Does Not Apply

Bridgeport Quill Master Multi Angle Attachment Very Nice Condition 3-3/8″ Quill ID Diameter 1/2″ Drive + Bridgeport Right Angle Attachment for Quill Master Head 3/16″ Dia Mount 3/16″ Drive & Tool Capacity Hard to Find Attachment Allows Virtually ANY Angle to be Machined Also Includes Assorted Lot of 3/16″ Shank End Mills 5/16″ to 3/4 + Bonus Micro Boring Heads Includes Wrench. Check my other auctions for more quality tools and machinery. If you are waiting for more auctions to end- just let us know. Powered by SixBit’s eCommerce Solution. The item “MINT! BRIDGEPORT QUILL MASTER MULTI ANGLE ATTACHMENT With RIGHT ANGLE ATTACHMENT” is in sale since Friday, December 30, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “stm_surplus” and is located in Ellington, New York. This item can be shipped worldwide.

• Brand: Bridgeport
• MPN: Does Not Apply