I bought this machine from the original owner about 2 years ago. I have only put about 100-150hrs on it since i got it. 90% of the work i have done on this machine is aluminum. I removed the air system (air brake, low pressure lockout and pneumatic oiler). The old pneumatic oiler was replaced with an electric Bijur oiler. All oil lines and oil meters were replaced about 100hrs ago, along with a new belt/bushings in the head. The memory board was rebuilt by Martin CNC in Florida. Most recently, the spindle bearings have been re-greased with Kluber NBU 15. Only problem is that the trackball on the control panel has broken and needs to be replaced. Perfect for the small home shop, or prototype use. Has been run on a 30A breaker. The control is primarily a conversational control (in my opinion the very best conversational control on the market) but can also take NC code. Control= Ultimax II conversational/NC. Table size= 14″ x 49″. Axis travel= X – 24″, Y – 14″, Z (quill) – 5″, Z (knee) – 15.5″. Spindle motor= 3 HP. Speeds= 60-4000 (2 speed gearbox). Max cutting feedrate= 150 IPM. 1 – 250 IPM. Machine weight= 3800 lbs. Machine Dimensions= W (82″), L (88″), H (85). American Rotary 10HP rotary phase converter (converter has a single phase 220v plug, can run machine on a 30A breaker). Machine manuals (programming manual, owners manual, and original sales info). Assortment of tool holders, collets and wrenches. Spare servo encoder (all 3 servos use the same model of encoder). Some way lube (vactra 2). I need to move this machine by the 9th of May. Please contact me by text with any questions (6038015531). I can move the machine to the garage door with a pallet jack, but it is your. I cannot load machine. The item “1989 Hurco KM3P CNC milling machine” is in sale since Wednesday, April 26, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “abfparts” and is located in Amherst, New Hampshire. This item can’t be shipped, the buyer must pick up the item.

• Brand: Hurco
• Model: KM3P
• Country/Region of Manufacture: United States

BRIDGEPORT MILLING MACHINE WITH PROTO TRAK PLUS PROGRAMMABLE TWO AXIS. IN VERY GOOD CONDITION. WILL LOAD ON TRUCK FREE. WE ARE CLOSING BUSINESS WILL BE MANY MORE ITEMS LISTED. The item “BRIDGEPORT MILLING MACHINE WITH PROTO TRAK PLUS PROGRAMMABLE TWO AXIS” is in sale since Sunday, April 30, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “4udeals4u” and is located in Rockford, Illinois. This item can be shipped to United States.

• Brand: Bridgeport Milling Machine
• Model: BRIDGEPORT MILLING MACHINE WITH PROTO TRAK PLUS P

SHARP VERTICAL MILLING MACHINE. VARIABLE SPEED HEAD TYPICAL J2 SERIES DESIGN. 9″ X 48″ TABLE. MACHINE IS IN EXCELLENT CONDITION AND WAS JUST COMPLETED OUR SERVICE PROGRAM. OPTIONS AVAILABLE AT ADDITIONAL COST, SIMPLY PICK YOUR OPTIONS, TOTAL THE AMOUNT AND MAKE AN OFFER LISTING OPTIONS ON THE COMMENT SECTION. NEW READOUT AND GLASS SCALES INCLUDING INSTALLATION………………… NEW TABLE FEED DRIVE X AXIS INCLUDES INSTALLATION………………………… NEW TABLE FEED DRIVE Y AXIS INCLUDES INSTALLATION………………………… ONE SHOT LUBE INCLUDED. CRATING SERVICES AVAILABLE HERE……………………………………………………….. WE LOAD FOR NO ADDITIONAL COST. The item “SHARP VERTICAL MILLING MACHINE BRIDGEPORT STYLE” is in sale since Wednesday, April 26, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “tasironltd2012″ and is located in Berea, Ohio. This item can’t be shipped, the buyer must pick up the item.

• Brand: SHARP VERTICAL MILLING MACHINE BRIDGEPORT STYLE
• MPN: SHARP VERTICAL MILLING MACHINE BRIDGEPORT STYLE
• Country/Region of Manufacture: Unknown
• Model: SHARP VERTICAL MILLING MACHINE J2 BRIDGEPORT STYLE

MACHINE IS GOOD USED CONDITION! VERTICAL HEAD HAS NEVER BEEN USED! YOU CAN SEE MACHINE UNDER POWER IN MY WAREHOUSE. LAGUN FU2-LA UNIVERSAL HORIZONTAL MILLING MACHINE. TABLE SIZE: 12″ x 55″. CROSS TRAVEL: 12 1/2. VERTICAL TRAVEL (KNEE): 18. TABLE INDEX (BOTH DIRECTIONS): ± 45 DEGREE. RANGE-LONGITUDINAL & CROSS: 1/2 – 31 1/2 IPM. VERTICAL: 1/8 – 9 1/2 IPM. RAPID TRAVERSE LONGITUDINAL & CROSS: 118 IPM. RAPID TRAVERSE: 35 IPM. SPINDLE NOSE: ISA 40 TAPER. SPINDLE SPEEDS (18): 28 – 1,400 RPM. SPINDLE TO OVERARM: 6 1/8. 220/440V 3 PHASE (WIRED 220V). SPINDLE MOTOR: 7 1/2 HP. FEED DRIVE MOTOR: 2 HP. COOLANT PUMP: 0.10 HP. COLLET HOLDER WITH COLLETS. POWER FEED AND RAPID TRAVERSE IN ALL DIRECTIONS. DIMENSIONS: 78 3/4 x 73 x 69 1/2. WEIGHT: 6,950 LBS. PLEASE CHECK OUT MY OTHER AUCTIONS. The item “LAGUN HORIZONTAL/VERTICAL MILLING MACHINE COMBINATION HEAD UNIVERSAL TABLE FU2LA” is in sale since Friday, April 28, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “adeal4uto” and is located in Louisville, Kentucky. This item can be shipped to United States.

• Brand: LAGUN
• MPN: 277101850
• Country/Region of Manufacture: Spain
• Model: FU2-LA
• Country of Manufacture: SPAIN

BOSTOMATIC CNC 400 SERIES VB30-2. Previously used by large jewelry manufacture. The item “BOSTOMATIC CNC 400 SERIES VB30-2″ is in sale since Monday, April 24, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “luxorgoods” and is located in Albuquerque, New Mexico. This item can be shipped to United States.

• Brand: BOSTOMATIC
• MPN: CNC 400 SERIES
• Country/Region of Manufacture: United States
• Model: VB30-2

BRIDGEPORT Torq-Cut TC-3G Vertical CNC Mill. The TORQ-CUT VMC is a computer numerically controlled, vertical spindle, bed-type machining center which incorporates automatic tool changing and a power drawbar. This machine is in good running and working condition, available for demo to any and all our customers. Bridgeport BPC MC Control. (14) BT-40 Tool Holders. Traverse X & Y. Axis Thrust X & Y. X & Y Peak Thrust. 914 x 356 mm. Distance from Table to Floor. 2.5 x 2.8 m. 230 Volt, 3 Phase. Specifications subject to verification. Listed on every item are the directions and information needed to do so. Items over 3000 lbs. Less than 12000 lbs. We will not palletize, skid or crate an item over 1000 lbs. These items are prepared for transit by wrapping the item’s electrical components with stretch wrap and spraying down any exposed metal surfaces with protective oil. These items exceed our forklift’s capacity. We may charge more in the case of items located outside our showroom. MACHINE DIMENSIONS: 98″ x 110″ x 100H. MACHINE WEIGHT: 7200 lbs. We accept all major credit cards except American Express. Orders are not processed until theyre paid in full. This item is subject to prior sale. We reserve the right to end a listing early if the item sells through another outlet. All specifications and description of said goods are approximate only. MACHINE USE AND SAFETY. Machinery Turn-around Time – Your order is processed after it is paid for in full. Many factors come in to play when purchasing industrial equipment. Our turn-around time depends on the schedules of these outside sources. Damages- We go above and beyond to assure your item arrives safely but there have been cases when an item still gets damaged during transit. We will not be held accountable for an item damaged during transit unless it was packaged improperly. If an issue arises during transit we will do our best to represent you as our customer and resolve the issue. We specialize in reliability and quality. Our address is 20933 Plummer Street Chatsworth, CA 91311. DIRECT CAPITAL provides equipment financing for our customers. For both new and used equipment. The item “BRIDGEPORT TORQ-CUT TC-3 CNC Vertical MILL 30x16x20 Travels, 8000-RPM” is in sale since Wednesday, April 26, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “p20933b” and is located in Chatsworth, California. This item can be shipped to United States.

• Brand: Bridgeport
• Model: Torq-Cut TC-3

1959 Bridgeport J head. 9″ x 36″ table. I bought this machine from an auto shop about 4 years ago. I did complete rebuild. All bearings in head replaced along with new spindle bearings and taper regrind. All new bearings around machine as well (including power feed). New lead screw nuts. Spindle motor driven by VFD. The VFD is set up to run on single phase 115v. No need for a 220v plug or 3 phase. The power feed however is not hooked up and uses 3 phase. Machine is very tight and accurate. Comes with tons of extras. Way lube and spindle oil. Full assortment of R8 collets. Boring head and bars. 1x set of soft jaws. Machine manual and rebuild manual. Machine must sell by the 9th of may. Its on a pallet so it can be moved easily. I dont have the equipment to load. The item “1959 Bridgeport J head milling machine” is in sale since Wednesday, April 26, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “abfparts” and is located in Amherst, New Hampshire. This item can’t be shipped, the buyer must pick up the item.

• Brand: Bridgeport
• Model: J Head
• Country/Region of Manufacture: United States

1990 Fadal 906-1 Vertical Machining Center 40/20 CNC 88 Control. Table Size 47.9″ x 20″. Spindle Motor 22 HP. Spindle Speeds 10,000 RPM. Link to YouTube video of machine running. Machine Is Available For Inspection Under Power By Appointment. The item “1990 Fadal 906-1 Vertical Machining Center 40/20 CNC 88 Control/Video” is in sale since Monday, April 17, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “jkwapich1″ and is located in Lake Saint Louis, Missouri. This item can be shipped to United States.

• Brand: Fadal
• MPN: 906-1