9 x 42 Bridgeport Vertical Milling Machine Model J. 60 – 2750 RPM. HP 1 HP 220 Volt 3 Phase. Machine Weight 2000 LBS. 1 HP MIlling Head. Please Note the power feed needs a new on/off switch. The table has a few holes and hits there where filled. The head is quiet and fully functional. Inspect under power in our Lebanon NJ warehouse. The item “9 x 42 Bridgeport Vertical Milling Machine Model J, Bridgeport Power Feed” is in sale since Friday, November 10, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “mfmachinery” and is located in Lebanon, New Jersey. This item can be shipped to United States.

• Brand: Bridgeport
• Model: J
• Country/Region of Manufacture: United States

3 (75 mm) Tilting Rotary Table with a 65mm- 3 Jaw Self Centering Lathe Chuck for Milling Machine. This Whole Package Includes below. 3 / 75 mm Tilting Rotary table. Of a high quality 65 mm 3 Jaw self centering Chuck. Of a back plate which has holes in a manner that it can be fitted on to a 3 slot as well 4 slot Rotary table. 3 set of T nut to clamp / tighen the Back Plate with the Tee slots of the Rotary Table. When the table is at 90 degree (vertical position) with the chuck mounting- the centre height of this comes nearly 55 mm, pls note. We do not have any tailstock for this centre height assembly. DETAILS ABOUT THE ROTARY TABLE. High Precision Mini Rotary Table 75 mm (3 Inches). Overall Height is a non tilting position is around 55 mm. Table is graduated 0- 360 degrees in 5 degree divisions. Rotating handle is graduated 0- 10 degrees in 5 minutes divisions. Table can tilt upto any position 0 to 90 degrees and locked at any position as per the requirement. It’s a superb high quality precision item having gunmetal gear and EN8 (form of steel) worm combination to have a minimum wear and tear to give a long life with negligible play to this product. Minimum possible friction means long life and best performance! Weather conditions, flight situations, national holidays etc. Since we offer these in very competitive prices, we are bound to send them through ordinary posts which generally takes above mentioned time. Transit time includes normal weekdays. We assure you best solution in your favour. Have a Pleasant Day!! The item “3 Inches (75 mm) Tilting Rotary Table -4 Slots & 65 mm 3Jaw Self Centering Chuck” is in sale since Tuesday, July 05, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “worldbesttools2016″ and is located in Delhi, DELHI. This item can be shipped worldwide.

• Brand: Unbranded/Generic
• Country/Region of Manufacture: India
• MPN: Does Not Apply

THIS WEIGHS 147 Lbs. GARVIN DIVIDING HEAD W/ TAILSTOCK, 7″ 3- JAW SKINNER CHUCK, 8″ DIVIDING PLATE. THE CENTER IN THE TAILSTOCK DOES NOT LINE UP WITH THE CENTER OF THE CHUCK AS IT IS. IT NEEDS TO TO BE ROTATED. TO DO THIS THE THE ADJUSTMENT GROOVE AT THE REAR OF THE CENTER NEEDS TO BE EXTENDED AROUND THE CENTER. OR THE POINT NEEDS TO BE REGROUND TO THE BOTTOM OF THE CENTER. THIS IS JUST MY OBSERVATION, I HAVE NEVER HAD ONE OF THESE BEFORE. CLEAN FINE WORKING CONDITION. Please let the pictures help with the description and condition and view my other auctions for more TOOLS. The item “GARVIN DIVIDING HEAD With TAILSTOCK, 7 3- JAW CHUCK, CLEAN FINE WORKING COND” is in sale since Thursday, October 12, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “andyswift” and is located in East Greenwich, Rhode Island. This item can be shipped to United States.

Table travel: 18″ x 9.5″ x 16.5 (X, Y, Z). Table slots are 5/8 T-slots. Max workpiece weight: 500 lbs. 90 inches/minute in X, Y and 65 IPM for Z for rapids and for cutting. Powerful NEMA 34 stepper motors on X, Y, Z. Precision ground ball screws on X, Y, Z. Nose diameter: 3 3/8. Taper: R8 with spindle lock for single hand drawbar operation. 1.5 HP (2 HP peak) induction motor. Strong enough for all materials. Computer-controlled speed and direction. Two belt ratios: 100-2,000 RPM and 250-5,140 RPM. Flood coolant system (Upgraded Coolant Pump). High performance controller PC & flat screen monitor. Path Pilot software & license. Tormach Tooling Set (TTS) tool holders. Options Available from Tormach. Automatic tool changer, 4th axis, Duality CNC lathe, CNC camera, vacuum table (none are included). Mill: 230 VAC (single phase) at 10 amps. Coolant pump: 115 VAC. Weight: 1400 lbs (with enclosure). Rigid cast iron & steel construction for maximum performance. The item “Tormach CNC 1100 Mill Series 3 withextras” is in sale since Friday, November 10, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “ewash91″ and is located in Casselberry, Florida. This item can’t be shipped, the buyer must pick up the item.

• Brand: Tormach
• Model: Series 3 PCNC 1100
• Country/Region of Manufacture: United States
• Bundle Listing: Yes

TREE VMC 1060 VERTICAL CNC MILLING MACHINE W/ 24 ATC & SIEMENS CONTROL 230V 3PH. Table Size: 50″ X 23.2″ Travels (X, Y, Z): 40″ x 24″ x 25 Table Capactiy: 2000 LBS Spindle Taper: CAT 40 Spinde Speeds: 8000 RPM Max Tool Changer: 24 ATC Spindle Drive: 20/15 HP Voltage: 230V 3 Phase. Machine is exactly as pictured and is fully guaranteed. We will load your truck or carrier free of charge at our loading dock. International buyers are always welcomed. Auctiva Free Image Hosting. Show off your items with Auctiva’s Listing Templates. Track Page Views With. Auctiva’s FREE Counter. The item “TREE VMC 1060 VERTICAL CNC MILLING MACHINE With 24 ATC & SIEMENS CONTROL 230V 3PH” is in sale since Friday, September 16, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “dockguys” and is located in Rochester, New York. This item can be shipped worldwide.

• Brand: TREE
• Model: VMC 1060
• MPN: VMC 1060

GG2 is a complete, general purpose and smithing CNC machine built upon a large body of open source work. GG2 sets the modern standard in affordable 3-axis CNC, it comes complete with tooling, operating software and instructions, and it accepts g-code from most CAM post-processors. GG2 works with common milspec 80% receiver frames for AR-type carbines. 2017 units are compatible with aluminum 1911 government frames. The item “2017 Ghost Gunner 2″ is in sale since Tuesday, November 07, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “defensedistributed” and is located in Austin, Texas. This item can be shipped to United States.

• Brand: Defense Distributed
• Bundle Listing: No
• Country/Region of Manufacture: United States
• Model: GG2 2017
• MPN: Does Not Apply

Pro Tram System (Model: 01-000). Square the head of a milling machine quickly and easily. To use the Pro Tram simply lower unit to the table and adjust the head until both indicators read the same. Guaranteed to be equal to or better than any other tramming method or spindle squaring device available. Sized perfectly to fit the bed of a 6 vise allowing the head to be trammed to the vise instead of the table. Can be used with a sine bar or sine plate to adjust the head to precise angles. Calibration procedure accounts for any error introduced by worn collets. Indicator graduations available in 0.001″ and 0.0005″. Shank sizes available in 1/2″ and 3/8″. Large 2.2 easy to read indicator face. Indicator repeatability of 0.0002. Body made from red anodized aluminum. Includes calibration gage, manual and padded case. Also available is our Mini Pro Tram System designed specifically for smaller Table Top and Mini mills. The Pro Tram by Edge Technology makes the process of tramming your mill fast, easy and accurate. Tramming is the process of squaring the head of your milling machine to the table. The Pro Tram is sized to fit the bed of a 6 vise allowing you to tram directly to vise for increased accuracy. It can be used with a sine bar or sine plate to adjust the head to precise angles. Protected by one or more US patents. Please request a package invoice before you pay. We guarantee that the Pro Tram System will allow you to tram your machine with the same or better accuracy as compared to conventional tramming techniques. We also guarantee that you will be able to complete the tramming procedure with less time and effort. Related Products by Edge Technology Products. Please take a moment to check out the other high quality machinist gages and tools that we offer. The item “Pro Tram Bridgeport Head Square Knee Mill Spindle CNC Router milling endmill #01″ is in sale since Monday, October 30, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “edge_products” and is located in Tucson, Arizona. This item can be shipped to United States.

• Brand: Edge Technology
• MPN: 01-000
• Model: Pro Tram System 1/2″ Shank – 0.001 Graduation
• Used With: Bridgeport Mills CNC Router Knee Mill Endmill
• Used For: Tramming or Square Spindle milling machine head