General Info: Stock #: CL-171081 Location: Stone Mountain, GA Brand: Mazak Model: VTC-16A Serial: 116217 Year: 1995 Approx. Spindle Nose to Table: 4″ – 24″ Spindle Motor: 15 HP Spindle Speeds: 40 – 7000 RPM Spindle Taper: Cat 40 Automatic Tool Changer Capacity: 24 X & Y Rapids: 787 IPM Z Axis Rapid: 590 IPM Electrical: 230/460V(Wired 460)/3PH Equipped With: Mazatrol M32B Controller, 24 Station Automatic Tool Changer, Chip Tray w/ Coolant Pump Additional Info: The machine is in working condition. Below is a video of it in operation. We are glad to show under power. Video will open in a new window. If you have any specific questions or would like to set up a time to view this piece of machinery feel free to contact the contact person for this listing 7 days a week. Purchaser shall pay The Equipment Hub a late penalty on all amounts over 30 days past due computed on an interest rate equal to 18% per annum. The Equipment Hub SHALL NOT BE RESPONSIBLE FOR THE CONSEQUENCES OF PURCHASER’S FAILURE TO INSPECT THE EQUIPMENT OR MERCHANDISE OR FOR ANY INACCURACIES, INSUFFICIENCIES, OR OMISSIONS IN SUCH DESCRIPTIONS, SAMPLES, TOLERANCES AND/OR SPECIFICATIONS. The employees or representatives of The Equipment Hub are not authorized to make any statement or representation as to the quality, character, size, condition, quantity, etc. Of the equipment and merchandise offered for sale inconsistent with these Terms and Conditions. Any such statements made will not be binding on The Equipment Hub or be grounds for any subsequent claim. All implied warranties of merchantability and fitness for a particular purpose are hereby disclaimed and excluded from this agreement. Care is taken to give reliable descriptions but these are not guaranteed and prospective purchasers are advised to check vital details. We also reserve the right to correct any stenographic errors. All specifications and descriptions of said goods are approximate only. THE WARRANTIES DISCLAIMED HEREUNDER INCLUDE, BUT ARE NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. No salesman or other representative of The Equipment Hub has authority to make any warranties. It is Purchaser’s responsibility to inspect the goods and to ascertain if the specifications, tolerances, descriptions and condition of the goods conform to the Purchaser’s requirements. Purchaser does hereby discharge The Equipment Hub from any and all liability directly or indirectly resulting from the presence of the aforesaid chemicals or materials, including and not limited to any and all liability directly or indirectly resulting from the failure of The Equipment Hub to give more specific warning with respect to individual articles or substances or from the inadequacy of any warning. Suggestions by The Equipment Hub regarding the design, specification, tolerances, use or suitability of the Products are made in good faith but are not binding upon any party and do not give rise to any liability by The Equipment Hub. MODIFICATIONS/ SEVERABILITY: Purchaser acknowledges that these are the only Terms and Conditions of sale, and is intended by the parties as a complete and exclusive statement of the terms of their agreement. This supersedes all prior agreements, written or oral. Any variation from the terms hereof contained in the Purchaser’s acceptance is hereby rejected. The agreement of which these terms are a part can be modified or rescinded only in writing signed by The Equipment Hub. If any provision of the invoice or these Terms and Conditions is determined illegal or unenforceable, it shall not affect the enforceability of any other provision or paragraph of the invoice or these Terms and Conditions. The remedy hereby provided shall be the exclusive and sole remedy of Purchaser and any right to consequential and incidental damages is excluded. The item “Mazak VTC-16A Vertical Machining Center, Mazatrol N32B Control” is in sale since Friday, April 20, 2018. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “equipmenthub” and is located in Stone Mountain, Georgia. This item can be shipped to United States.

• Brand: Mazak

2007/8 fanuc robodrill mate series oi-mc. Comes with orange vice, metrol tool setter, American rotary ADX model phase converter, fluid/filter/portable catch pan and lots of tooling. The item “Fanuc robodrill mate cnc endmill machine” is in sale since Monday, July 9, 2018. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “eas4003″ and is located in Piedmont, Missouri. This item can be shipped to United States.

• Brand: Fanuc
• Model: Robodrill mate
• Country/Region of Manufacture: United States
• Bundle Listing: No

PCNC770 Series 2 delivered November 2017 Only used to cut aluminum 6061 T6 Includes: Machine stand Full enclosure 10 station automatic tool changer Power drawbar Flood coolant kit Automatic oiler Air pressure regulator/filter/oiler Pathpilot 2 Controller Tormach touch screen monitor Keyboard Mouse Jog shuttle Tormach 5 precision machine vise Tension/compression tapping head set XYZ Probe Automatic tool setter 10 setscrew tool holders 5 ER20 collet holders 26 ER20 collets Jacobs taper tool holder w/Albrecht chuck. Also includes steel 6 drawer tool cabinet filled with endmills (mostly carbide), taps, reamers, drill indexes, helicoils, etc. Plus 6 sets precision gage pins and blocks (see photos). 24x18x3 thick precision granite inspection plate (sits on top of cabinet). The item “Tormach PCNC770 8 months old with tooling” is in sale since Thursday, July 19, 2018. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “ernestovito” and is located in Las Vegas, Nevada. This item can’t be shipped, the buyer must pick up the item.

• Model: PCNC770 Series 2
• Brand: Tormach

Cincinnati Milacron 10HC-2500-A – Horizontal Machining Center. 4-Axis Horizontal Machining Center. Full 4-Axis simultaneous contouring. Longitudinal travel (table, X-axis): 100 (2,500 mm). Vertical travel (spindle carrier, Y-axis): 60 (1,500 mm). Cross travel (column, Z-axis): 30 (750 mm). Spindle Nose to Centerline of Table: Minimum 5-3/8 (137 mm). Spindle Nose to Centerline of Table: Maximum 35-3/8 (899 mm). Spindle Centerline to top of Table (Y-axis): Minimum 6-3/4 (171 mm). Spindle Centerline to top of Table (Y-axis): Maximum 66-3/4 (1,695 mm). Work Surface: 31-1/4″ wide x 104″ long (794 mm W x 2,642 mm L). Load capacity: 10,000 lbs. (4,536 kg)(1). NC ROTARY TABLE (B-axis). Work Surface: 30 diameter Rotation Range: 360 x 0.001 degree (Full 4-axis contouring). SPINDLE CARRIER (Y and Z axes). Spindle drive, all models: 10 hp (7.5 kW). Maximum thrust on spindle nose: 4,000 lbs. 35% duty rated 2,500 lbs. Continuous rated Servo drive: DC Electric with SCR control. Spindle speeds: 20-4,000 rpm. Programmable in 1 rpm increments. Spindle taper: CAT 50 -30. POSITION AUTOMATIC TOOL CHANGER. Capacity chain storage matrix: 30-Tools. Tool identification method: Built-in coded pockets. Tool selection: Random access Max tool diameter (adjacent stations empty): 10.5 (267 mm). Max tool diameter (all station loaded): 4 (102 mm) Tool weight limit: 50 lbs. Maximum tool length: 17 (432 mm). Automatic tool change time: Approximately 9 seconds Optimum metal-to-metal time (similar length tools) Approximately 13 seconds. Big Blue CNC Control. Net weight: 36,400 lbs. Skidded weight: 39,000 lbs. 460 Volt, 60 Hz, 3 phase. The item “Cincinnati Milacron 10HC-2500-A Horizontal Machining Center” is in sale since Wednesday, April 19, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “smtbidbip” and is located in El Paso, Texas. This item can be shipped to United States.

• Model: 10HC-2500-A
• Country/Region of Manufacture: United States
• MPN: Does Not Apply
• Brand: CINCINNATI

48.81″ x 21.65″. 22 – 3150 RPM. Spindle Nose to Table Top. 7.87″ – 25.98″. 25 / 20 HP AC. Rapid Traverse Rates (X&Y/Z). 945 / 708 IPM. 4.92″ / 5.9″. Machine Dimensions (L x W x H). 101.18″ x 148.81″ x 119.13. MAZATROL M-32A CNC CONTROL. Auto Tool Length Measurement. Mfg Date February 1989. The item “USED MAZAK AJV-25/405 CNC Vertical Mill 1989 CAT 50 3150RPM VMC 39x20x18 ATLM” is in sale since Friday, November 17, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “championmach” and is located in Waxhaw, North Carolina. This item can be shipped to United States.

• Brand: Mazak
• MPN: Does Not Apply
• Model: AJV-25/405
• Country/Region of Manufacture: Japan

Tormach TTS Wall Rack. 4 shelves that can be tilted 0-20 degrees. All shelves are interchangeable. Holds 40 TTS holders. Uses grommets to protect TTS tool shank. Holds 5 Er15, ER20, ER32 collets. Holds up to 6 screw drivers. Rack dimensions are 32 tall, 16 wide, 8.5 deep. Proudly made in Ohio. The item “Tormach TTS Wall Rack Made in USA” is in sale since Tuesday, June 26, 2018. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “mat-elki” and is located in Dayton, Ohio. This item can be shipped to United States.

Sign up to Newsletters. Brand New AL-310S X-Axis Power Feed Kit For Milling Machine. Our Brand New AL-310S X-Axis Power Feed Kit is for Bridgeport and Similar Knee Type Milling Machines. These will fit almost any vertical knee type mill out there with the 5/8 Shaft End, Including but not limited to Bridgeport, Precision Matthews, Grizzly, Enco, Jet, Sharp, Acer, Webb, GMC, Kent, Clark, Supermax, Enco, Turn Pro, Vectrax, Acra, Birmingham, Accu, First… The gear ratio between transmission plastic gear and motor shaft gear is not a whole number. The two gears will not mesh and wear at the same spot, this not only increases durability and longevity but even reduces noise over time. Speed can be adjust according to operators requirement, ranging from 0-9. Normally, jog switch should be at FEED position. For jog movement, just switch to “0″ position. Kept holding the switch until it travels to requires position. Gear cover must be open every 6 month to check whether lubrication for spiral gear is sufficient. Graphite type lubrication is suggested rather than silicon type. Carbon brush cap should be open every 6 month to check if the brush has wore out. Brush should be replace immediately if its length is under 5mm (front and back brush should be replaced together). To stop jog operating, you must first turn FEED KNOB to 0(OFF) position. Then move JOG SWITCH to FEED position. Be sure to follow the procedure for jog operation to avoid any damage caused by wrong movement. Brand new power feed. X traverse (left-right travel). Small volume and easy installation. Excellent speed control in the entire range. Power table feed won’t vibrate or strain in low speed. Direction control knob for easy and rapid operation. Safety feature to protect transmission gear and electronic components. Rotate speed: 0-200 RPM. Max torque: 450 in-lb. Max feed rate: 650mm/min. Max return speed: 850mm/min. Dimension: 8 x 4.5 x 13 inches. Package size: 11.8 x 8.7 x 13.8 inches. Gross weight: 16.5 lbs. 1 x Power Feed For Milling Machine. 8 x Adjustable Pad. 2 x Tiavel Stop Assembly. 1 x Bevel Gear. 1 x Dial Nut. 1 x Locking Nut. 1 x Product Manual. As a leading and emerging company in manufactory and exporting business, we are specialized in Business and Industrial Products, Sporting Goods, Pet Products, Home and Garden products for more than 10 years. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. If you have any changes, pls inform us. These charges are the buyers responsibility. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within. Leave a Message if. You want to cancel an order. If you need further assembly instructions for a product. Any other unspecified questions or concerns. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. A: The item ships from Rancho Cucamonga, CA, United States. A: Please log on your account. Q: How do I return an item? Please contact our customer service before you return an item. The item “SHARPS X AXIS POWER FEED BRIDGEPORT MILLING MACHINE POWER FEEDER NEW” is in sale since Monday, November 13, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “qiannlan-3″ and is located in Ontario, California. This item can be shipped to United States, Canada, Germany.

• Brand: VEVOR
• MPN: ICXCX004
• Bundle Listing: Yes
• Model: AL-310S
• Country/Region of Manufacture: CHINA
• Voltage: 110V, 50/60Hz
• Rotate speed: 0-200 RPM
• Max torque: 450 in-lb
• Max feed rate: 650mm/min
• Max return speed: 850mm/min
• Dimension: 8 x 4.5 x 13 inches
• Gross weight: 16.5 lbs

Item for sale is (1) Bridgeport Quill Master JA Milling Attachment. Item is used and in good condition. Please note that this quill master has been repaired at the mounting ring. The repair was properly done, and it functions properly, as it should. We have parts and accessories in stock for. AMMCO and all major brands! 314 649-0ERF for questions M-F, from 9-6 CST. The item “Bridgeport Quill Master JA Multi Angle Milling Attachment Head Mill Machine Gree” is in sale since Wednesday, October 11, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “heerboth” and is located in Saint Clair, Missouri. This item can be shipped worldwide.

• Brand: Bridgeport
• Model: JA
• MPN: Quill Master
• Country/Region of Manufacture: United States