Clausing Model 8540 Horizontal Milling Machine. 220 VAC – 3 Phase. 28″x 7″ Table. Two 30 Taper Arbors. One 30 Taper Collet Chuck. Runs well – Just needs a bit’o TLC! Visit us and see this machine running! The item “Clausing Model 8540 Horizontal Mill (CTAM #4708)” is in sale since Monday, July 8, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “cooktool683″ and is located in Sicklerville, New Jersey. This item can’t be shipped, the buyer must pick up the item.

• Country/Region of Manufacture: United States
• Function: Milling
• Brand: Clausing

R8 ER32 COLLET SET 18PC / LATEST QUALITY. THIS QUALITY AND PRICE ONLY FROM RDGTOOLS. 18PC COLLETS COVERING ALL SIZES 2-20MM. THESE COLLETS ALLOW HOLDING OF. STRAIGHT SHANK SLOT / END MILLS. DRILLS REAMERS, SPOT FACERS, ETC. PLUS R8 ER32 COLLET CHUCK WITH SPANNER. IN FACT ANYTHING ROUND BETWEEN 2-20MM. 18PC COLLET SET SET IS STORED AND DISPLAYED IN QUALITY. OR SEE OUR OTHER COLLET COMBINATIONS. The item “RDGTOOLS 18PC R8 ER32 COLLET SET FOR BRIDGEPORT MILLER” is in sale since Tuesday, April 19, 2011. This item is in the category “Business, Office & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “rdg355″ and is located in YORKSHIRE. This item can be shipped to North, South, or Latin America, all countries in Europe, Japan, Australia.

• MPN: Does Not Apply
• Brand: RDGTools HBM Myford

CNC Spindle Motor & Tool Parts. Stepper Motor & Driver. Servo Motor & Driver. HMI & PLC Panel. CNC Router & Tools. 12″ & 36″ 2Axis Digital Readout TTL Linear Glass Scale DRO Milling Lathe Machine. (1)Digital display to. And improve precision (2)Advanced. So to accomplish a perfect project (3). This DRO kit is. Commonly fitted to machines , especially for metal working – lathes, cylindrical grinders, milling machines, surface grinders, boring mills and other machine tools – to allow the operator to work faster and with greater accuracy. Use of DROs is not limited to manually operated machines. CNC machines can usually be switched to manual operation, and in this case a form of DRO is simulated on its control panel. Supply Voltage range: AC 80V220V; 5060Hz. Operating temperatur: 045 degree centigrade. Storage temperatur: -3070 degree centigrade. Relative humidit: Less than 90%. Readout allowable input signal: TTL square wave. Allowable input signal frequency: Less than 5M Hz. Max resolution of digital display length. 5µm (0.005mm/0.0002). Min resolution of digital display angle : 0.0001/pulse. Dimensions: 28317870mm (11.2″7″2.8). Linear Scale communicate: DB9(RS232). Backup data for power fail: power off Memory by E2PROM for ten years. Lifetime: five million times. 2pc Linear scale 300mm+900mm (12″ & 36″). 1pc 2Axis digital read out with holder and mount bracket. 2pc Mounting base for scales. 2pc Protective cover for scals some screws for scales. 1pc English User Manual. Q1 : are the length 300MM, 900MM travel length or total? Answer : all are travel length. Q2 : what does the dro measure to? Answer : measure to 0.005mm , 0.0002inch 1inch=25.4mm. Q3 : Can i cut the scales by myself? Answer : Technically NO, it maybe unavailable after cutting. Q4: Do you have English user manual? Answer : yes, it comes with the dro box. Q5: Do you have other cheaper types , such as measure to 0.001mm? Q6: Is it easy to mount these scales and dro? Answer : Please must check the scale pin definition (1,2,3,4,5,6,7,8,9), which is very important!! Q8: How to switch between milling machine lathe grinding machines. Feedback is very important to us. So that we can address your concerns. It is impossible to address issues if we do not know about them! Your satisfaction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. If you need any CNC parts or repairs, welcome to contact me, we will try our best to help you. If it’s non-workdays, please kindly be patient and wait till Monday. The item “12 & 36 2Axis Digital Readout TTL Linear Glass Scale DRO Milling Lathe Machine” is in sale since Monday, February 25, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “vipwindows_168″ and is located in Monroe Township, New Jersey. This item can be shipped to United States.

• Brand: ToAuto
• Type: Digital Readout
• Axis: 2Axis
• MPN: Does Not Apply
• Compatible Equipment Type: Lathe
• Model: DRO-2Axis 300&900
• Supply Voltage range:: AC 80V~260V; 50~60Hz
• Power consumption:: 15VA
• Scale: Optical
• Length resolution:: 5µm
• Length: 300&900mm
• X-Axis Travel Bed: 10” – 15”
• Y-Axis Travel Bed: 36” – 40”

MYFORD COLLET CHUCK WITH ER32 COLLET SET. ER32 COLLET CHUCK WITH BUILT IN MYFORD THREAD. THIS IS A 2PC HEAD SYSTEM. THIS SYSTEM IS DESIGNED TO CREATE THE BEST ACCURACY AVAILABLE ON YOUR MACHINE! 1CLEAN ALL PARTS. 2 FIT THE BACKPLATE TO THE MACHINE. 3ROUGH TURN THE REGISTER. 4 SKIM FACE AND BLEND WITH THE DIAMETER. 5 FINISH THE REGISTER. 6 OFFER UP THE ADAPTOR AND SKIM MORE IF NEEDED. 7 CLEAN THE ADAPTOR AND SECURE WITHTHE 3 SCREWS BUT DO NOT TIGHTEN. 8USE A DTI ON THE TAPER TO CHECK THE ACCURACY. 9 IF REQUIRED TAP DOWN THE HIGH POINT AND RE CHECK. 10 TIGHTEN THE SCREWS. AND FULL 18PC ER32 COLLET SET RANGE 2-20MM AND IMPERIAL EQUIVALENT. THE COLLETS ARE SUPPLIED IN FITTED ALUMINIUM BOX, THE CHUCK COMES IN PLASTIC TUBE. THIS COLLET SET WILL HOLD THREADED AND STRAIGHT SHANK ENDMILLS / DRILL BITS ETC. The item “RDGTOOLS MYFORD ER32 COLLET CHUCK WITH 18PC ER 32 COLLETS 2MM TO 20MM SUPER 7″ is in sale since Thursday, November 18, 2010. This item is in the category “Business, Office & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “rdg355″ and is located in YORKSHIRE. This item can be shipped to North, South, or Latin America, all countries in Europe, Japan, Australia.

• MPN: Does Not Apply
• Brand: RDGTools HBM Myford

Single phase 1/8 hp pump, made from high grade material with anti rust treatment. This unit is ideal for the small to medium size lathe or milling machine. Tank Size 390 x 260 x 320mm Capacity 9 Litres. The item “Vertex Coolant Pump Kit 220 volt 1/8hp 9 Ltr Tank” is in sale since Thursday, September 21, 2017. This item is in the category “Business, Office & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “fordeight” and is located in West Midlands. This item can be shipped worldwide.

• Country/Region of Manufacture: Taiwan
• MPN: Does Not Apply
• Brand: Vertex

We’ve owned this machine for many years. The X Axis motor went bad and we have decided not to fix. The item “MILLTRONICS Model VM16 CNC Vertical Machining Center, VMC” is in sale since Saturday, June 8, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “serienmanufacturing” and is located in Woodstock, Illinois. This item can be shipped to United States.

One is a vertical the other horizontal. I have a motor for it, and a bracket that needs fabricated also needs a pulley for the motor, comes with a brand new 3 swivel vise from shars. The tabs on the motor bracket need cut off. Comes with a vise, almost 100 end mills and multiple holders, a light attached for more visibility. Comes with the stand it’s sitting on. The pulley speeds are listed on the head. Both machines run on 110V single phase. The item “Benchmaster Milling Machine Lathe Machinist PLEASE NOTE THEY’RE 2 BEING SOLD” is in sale since Tuesday, June 25, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “daughty70″ and is located in Heyworth, Illinois. This item can be shipped to United States.

• Machine Type: Milling Machine

75MM SELF CENTERING MACHINE VICE. Very handy little vice for either drilling or milling. Close grain cast iron construction. Hardened Jaws with horizontal / vertical vee. Jaws will open upto 78mm. The jaw height is 32mm. Distance between camping centres 87mm. The item “RDG 75MM / 3 SELF CENTERING MACHINE VICE BLUE TYPE VICE ENGINEERING TOOLS” is in sale since Friday, January 30, 2015. This item is in the category “Business, Office & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “rdg355″ and is located in YORKSHIRE. This item can be shipped to North, South, or Latin America, all countries in Europe, Japan, Australia.

• MPN: Does Not Apply
• Brand: RDGTools HBM Myford

Jet 18 Milling/Drilling Bench Top/Pedestal Machine Model #: JMD-18!!! UNIT IS LIKE NEW!!! JMD-18 Stock #: 350018 INCLUDES: CS-18 Stand Stock #: 350045 for JMD-18 Mill Yellow foot pedal for spindle activation. SPEC’S SUBJECT TO FINAL INSPECTION. WE’LL DO OUR VERY BEST TO MAKE IT SO!!! The item “Jet 18 #JMD-18 Bench Top Milling/Drilling Machine withCS-18 Pedestal 150-3000 RPM” is in sale since Wednesday, March 13, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “rj-equipment” and is located in Cedarburg, Wisconsin. This item can’t be shipped, the buyer must pick up the item.

• Model: BENCH TOP SINGLE PHASE MILLING MACHINE
• Country/Region of Manufacture: Taiwan
• Spindle Horsepower: 2
• Table Length: 30” – 34.9”
• Model Year: 2011
• Type: Manual, Vertical
• Control Type: Manual Control
• MPN: JMD-18, CS-18
• Highest Spindle Speed (RPM): 2501 – 3000
• Make: JET
• Table Width: Less than 10”