Fadal 4020 Vertical Machining Center. 146″ x 103″ x 128 H. 21 Tool ATC, Fadal CNC 32MP Control, Spindle Chiller, High Speed CPU, Graphics, CAT-40 Taper, Rigid Tapping and all available manuals. Clean Well Maintained 40 X 20 with CNC 32MP Control,, 4th Axis Pre-Wire and 1,000BTS. Elk Grove Village, IL. The item “Fadal 4020 Vertical Machining Center” is in sale since Tuesday, February 16, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “myerstechcncs” and is located in Elk Grove Village, Illinois. This item can be shipped to United States.

• Brand: Fadal
• Model Year: 1996
• X-Axis Travel Bed: 40″
• Model: 4020A
• Max Spindle Speed (RPM): 10,000 RPM
• Function: Drilling
• Country/Region of Manufacture: Canada
• Table Length: 48″
• Table Width: 20″
• Power Source: Electric
• Control: CNC
• Machine Type: Machining Center
• Voltage: 220 V
• Z-Axis Travel Bed: 20″
• Y-Axis Travel Bed: 20″
• Spindle Taper: CAT 40
• Spindle Horsepower: 22.5 HP
• MPN: 4020

Bridgeport Series II Vertical Mill 3 Axis Acurite DRO. Chrome ways are in great shape. Knee travel (Z-axis manual). Ram travel (rack & pinion). Throat distance (min) (V-Ram). Throat distance (max) (V-Ram). Table to spindle nose gage line. 11 x 58 in. Table height above floor (max). Speed range low-infinitely variable. Speed range high-infinitely variable. Feed range manual adjust. 0.6-2.5 ipm. Drilling capacity – mild steel (manual). Drilling capacity – mild steel (power feed). Milling capacity – mild steel. Boring range – mild steel. Milling feed rate – X & Y axis. Milling feed rate – Z axis. Milling rapid feed rate – X & Y axis. Milling rapid feed rate – Z axis. All products are as is. I shall have no other obligation or liability, direct or indirect, of any kind, including liability for special, incidental, or consequential damages. This item is for sale locally and may end at any time. No Personal Checks are accepted. The item “Bridgeport Vertical Milling Machine 4 HP Series II 3 Axis DRO” is in sale since Monday, April 15, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “stantecss” and is located in Lenapah, Oklahoma. This item can be shipped to United States.

• Brand: Bridgeport
• Model: Series II

Tormach 770M 4 axis Path Pilot. With less than 100 run hours it is in excellent condition. We used it mainly to engrave Aluminum. This CNC Machine cuts just about everything (example: Aluminum, plastic, titanium, wood, just to name a few) with no problems. Great for Engraving, Milling, Drilling and much more. Includes Monitor, brand new Vice, 1/8-5/8 JT6 Chuck w/ TTS arbor and much much more. See spec sheet for more details. Call with any questions! Spec sheet (does not include enclosure, or additional accessories). Video of Mill running. The item “Tormach 770M CNC Mill” is in sale since Wednesday, June 9, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “williahenr53″ and is located in Las Vegas, Nevada. This item can’t be shipped, the buyer must pick up the item.

• Model: Tormach 770M
• Spindle Horsepower: 1.5 hp
• Country/Region of Manufacture: China
• Machine Type: Milling Machine
• Table Length: 26 in.
• Power Source: Electric
• X-Axis Travel Bed: 14 in.
• Y-Axis Travel Bed: 7.5 in.
• Z-Axis Travel Bed: 13.25 in
• Spindle Taper: R8
• Function: engraving
• Table Width: 8 in.
• Control: CNC
• Voltage: 110 V

Haas HS-1 Horizontal Machining Center CNC Mill. The item “Haas HS1-RP Horizontal Machining Center CNC Mill” is in sale since Wednesday, October 16, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “robda-13″ and is located in Dayton, Ohio. This item can’t be shipped, the buyer must pick up the item.

• Brand: Haas
• Model Year: 1997
• Model: HS-1
• Machine Type: Horizontal Milling Machine
• X-Axis Travel Bed: 36 in – 40 in
• Max Spindle Speed (RPM): 7501 – 10000
• Function: Drilling
• Voltage: 220 V
• Y-Axis Travel Bed: 16 in – 20 in
• Spindle Taper: CAT 40
• Power Source: Electric
• Control: CNC

We are pleased to offer the following Pre-owned Machinery for your inspection. MAZAK Nexus HCN-6000-II Dual Pallet Horizontal Machining Center. 31.5″X, 31.5″ Y, 31.5 Z. Distance Pallet Center to Spindle Nose. 5.91″ – 37.40″. Distance Pallet Center to Spindle Center. 3.94″ – 35.42″. 19.68″ x 19.68″. 35.43″ diameter, x 39.37″. 1.9 sec for each 90 degree. Maximum Tool Diameter (adjacent). 0.04 – 2363 IPM. 13.89″ High x 111″ x 273. Equipped With: MAZATROL FUSION 640M Nexus CNC Control EIA/ISO optional Pkg. 10.4″ Color LCD 3.5″ FDD Unit PCMCIA Interface (2-Slot) Inch/Metric Conversion Auto Tool Length Measurement & Breakage Detection Prep for Visual Tool ID/Data Mgt. Rear Chip Conveyor 60 Tool Chain Magazine Std. Thru Spindle Coolant with High Pressure Prep, 213 PSI Coolers for Ball screw (X, Y, Z-Axis) Preparation for MMS-B Optical Type MP10 Spindle Chiller Unit High Torque Spindle 630NM/7,000 RP AC 40 HP Index Table 1 Degree / 360 Positions 2 Pallet Changer Multitap Transformer Windows 2000 Operating System Manual Pulse Generator Signal Tower (3 Colors Lights) High Precision Boring Tornado Cycle Work Measuring System MP700 Touch Probe (CAT50) High Intensity Lighting. Machine is “AS IS, WHERE IS” and may require a professional rigger to load. Centra is not responsible for any damage due to weather, riggers, trucking, or any damage involved in transport, loading , unloading or situations beyond Centra Corporations control. PRICES : All Prices are in U. In no event shall Centra be responsible or liable for special or consequential damages. All specifications, descriptions of said goods are approximate only. Centra Reserves the right to correct any typographical errors. It is the Buyers responsibility to provide the proper safety equipment, devices and instructions for any particular use, and to take the necessary steps to conform to all to all Federal, State and Local safety standards including OSHA. The item “MAZAK Nexus HCN-6000-II Dual Pallet Horizontal Machining Center 2006″ is in sale since Tuesday, June 18, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “centramachinetools” and is located in Grove City, Pennsylvania. This item can’t be shipped, the buyer must pick up the item.

These vise jaws are made with versatility in mind. First reversible and stackable jaws. Talongrip and Visegrip in one. One side is for Talongrip and the other is for Versagrip. Recommend MiteeBite #33050 Talon Grip clamps, #33030 stop VersaGrip #32175 (NOT included). Made out of stress relieved 1018 steel. 8″ Steel Jaws for 6″ Vise. Allows edge griping on 0.060. AB Workholding side low profile stop with 6-40 screws are included. For large production setup and expanding your vice capacity. 75 shafts not included. Holds large material stock with built in stop and allows you to mill and drill thru without risers and cutting into the vise steel jaws. Made in the USA. The item “8 Steel Jaws for 6 Vise, Mitee-Bite Talongrip & Versagrip In One” is in sale since Sunday, December 23, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “abworkholding1″ and is located in Meadow Vista, California. This item can be shipped worldwide.

• Country/Region of Manufacture: United States
• Brand: AB Workholding, LLC

Downsizing or we would keep this American made classic. Subject to prior sale. The item “Bridgeport milling machine” is in sale since Tuesday, June 15, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “monkeyspud” and is located in Pompano Beach, Florida. This item can’t be shipped, the buyer must pick up the item.

• Machine Type: Milling Machine
• Brand: Bridgeport
• Control: Manual
• Voltage: 220 V

Schaublin Type 53 Swiss Made. The worlds top precision machine-tool brand! Do a Google search online to check out this type of milling! Table size: 44 in. Power feed in all axes. 3-Axis Digital Readout by Fagor installed. EQUIPPED: Most contents of 2. Rousseau Roller Bearing 3-Drawer Tool Cabinets. Tooling galore, in above excellent condition cabinets. TOO numerous to list here. A huge lot of a. Collets, Precision Boring Heads, Cutters etc. The cabinets form a common Table Top, 72 in. This milling machine was used only in the repair facility of Johnson & Johnson. In a local plant making hygiene products. Very clean and little used! Price, (in top shape) and FOB our warehouse….. We’re only 30 mi. From the NY border. Loaded No-Charge onto standard trucks, etc. Call our toll free found on our store banner! We’re quite friendly and talking is much faster than back and forth messages. All our inventory is subject to a prior sale, even if currently listed. The item “Schaublin Vertical Milling Machine, Type 53, Universal head, DRO, tooling galore” is in sale since Friday, August 7, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “machtoool” and is located in Montreal, Quebec. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.

• Model: 53
• Country/Region of Manufacture: Switzerland
• Brand: Schaublin
• Featured Refinements: Milling Machine

First-rate Machines Directly from End Users. Add to Favorite Sellers. Sign up to Newsletter. HAAS TM-2 2006 with Probe. TABLE SIZE 57.75″ X 10.5″. TABLE LOAD CAPACITY 1,000 LBS. SPINDLE 4,000 RPM. RAPID TRAVERSE 200 IPM. CUTTING FEEDRATES 200 IPM. ALL SPECIFICATIONS ARE ASSUMED TO BE CORRECT BUT MUST BE CONFIRMED BY PURCHASING ENTITY. Send us a message. We try to respond to all messages within 24 working hours. Please be advised that used machine tools will have typical wear inherent for their year and hours used. Mechanical parts are subject to fail. Here you will find an extensive selection of used machinery – all in good working condition – at a great cost savings over new equipment. We carry big name CNC brands such as Haas, Mazak, Mori Seiki, Amada, Okuma, Trumpf, Makino, Hwacheon, Doosan and much, much more! We also have harder-to-find makes for the specialist and manual machines for hobbyists or small shops. Get the latest updates on newly added equipment and unreal deals on used machinery. We believe manufacturing is the foundation and future of countries all over the world, and manufacturers continue to require more equipment and options to meet increased production demands. Manufacturers are not only ready to bring in new equipment, they are also updating and replacing existing machinery. All specifications are subject to verification. View more great items. Doosan MV4020 (2008) – 40″ x 20″ 24″ Travel, 47″x 20 Table. $49,500.00. Kira KN-30VF Vertical Machining Center w/ Pallet Changer. $6,500.00. Spinner VC-360 – 2009 – 15,000 RPM. $15,000.00. Hurco VMX24 2006 10,000 RPM Spindle Side Mount ATC Chip Conveyor. $26,500.00. This core approach reflects in our digital CNC marketplace. You will find a wide range of selective CNC equipment that meets our quality standards – all are in good working condition, have been in production, and come at a great cost savings over new equipment. This listing is currently undergoing maintenance, we apologise for any inconvenience caused. The item “HAAS TM-2 2006 with Probe” is in sale since Monday, September 28, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “machine_tool_bids” and is located in Chicago, Illinois. This item can’t be shipped, the buyer must pick up the item.

• Model: TM-2
• Machine Type: Vertical Machining Center
• Max Spindle Speed (RPM): 4000
• Model Year: 2006
• X-Axis Travel Bed: 40
• Y-Axis Travel Bed: 40
• Z-Axis Travel Bed: 16
• Function: Milling
• Brand: Haas
• Control: CNC