Tombstone Horizontal Machining Center for a 500mm Pallet HMC – 12″ x 12″ x 32. HMC does not appear to have actually been used. It was with some other CNC machines that were used for a long time. Over the years, we upgraded, and finally got rid of the old CNC machines. Kept this tombstone back to sell it separately. Tombstone has never had any holes drilled in it. It has plain, machined sides. Base is made to fit a 500mm pallet for a horizontal machining center. Tombstone is bolted to a pallet from a Niigata SPN50 HMC.

Main Spindle Power/Maximum Spindle Speed/Taper: 7.7 kw/16,000 rpm/BT 30 / 10.3 hp/16,000 rpm/BT 30. Distance between table top and spindle nose end: 200 – 610 mm / 7.9 – 24.0 inches. Table Size/Work Load: 550 x 350 mm/80 kg / 21.6 x 13.7 inches/176 pounds. X-Axis Travel & Feedrate: 450 mm/50 meters per minute / 17.7 inch/1,969 inches per minute. Y-Axis Travel & Feedrate: 320 mm/50 meters per minute / 12.5 inch/1,969 inches per minute. Z-Axis Travel & Feedrate: 410 mm/50 meters per minute / 16.1 inches/1,969 inches per minute. Cutting Feed Rates; X, Y, Z: 1 – 20,000 mm per minute / 0.04 – 787 inches per minute. Automatic Tool Changer (ATC) Storage: 26 tools / 26 tools. Maximum Tool Length x Diameter x weight: 200 x 110 mm x 3.5 kg / 7.9 x 4.9 inches x 7.7 pounds. Tool Change Time (Chip to Chip): 2.1 Seconds / 2.1 Seconds. Overall Dimensions (L x D x H): 3.26 x 1.75 x 2.35 meters / 127.4 x 69.2 x 92.5 inches. Machine Weight: 3,500 kg / 7,700 Pounds.

BROTHER CNC DRILL TAP VERTICAL MACHINING CENTER. SERIAL NUMBER: 11876 Year: 2006. Table Size: 19.7″ x 11.8 ” (Each Side). Table Capacity: 256 Lbs. Table Position Time: 2.9 Sec/180 Degrees. X-Axis Travel: 16.5. Y-Axis Travel: 12.8. X-Axis Rapid Feed Rate: 1181 IPM. Y-Axis Rapid Feed Rate: 1181 IPM. Z-Axis Rapid Feed Rate: 1965 IPM. Spindle Speed: 10,000 RPM. 15 HP Main Motor. 180 Degree Pallet Changer. Approximate Weight: 5700 Lbs. ALL SPECIFICATIONS SUBJECT TO VERIFICATION BY PURCHASER.

2019 & 2017 MATSUURA HORIZONTAL CELL SYSTEM W/ FASTEMS 24 PALLET CHANGER OR SINGLE MACHINE AVAILABLE! CONTACT FOR PRICE AND FULL INFORMATION PACKET! This Matsuura Fastems 24 pallet changer is a must-have for any business looking to streamline their metalworking processes. With the ability to quickly and easily change pallets, this machine is perfect for those who need to work with a variety of materials. The brand Matsuura is known for its high-quality machining centers and milling machines, and this pallet changer is no exception. Designed with the user in mind, it is easy to operate and will provide consistent results every time. Whether you’re in the metalworking industry or just looking for a reliable machine for your business, this Matsuura Fastems 24 pallet changer is the perfect choice.

Listing and template services provided by inkFrog.

USED 2010 MORI NH4000 DCG 21-Pallet (RPP) Vertical Pallet Stocker System with MSX-501IIIIMB MAPPS I Control in excellent condition. Control: MORI SEIKI MSX-501IIIIMB MAPPS I. Tool Storage Capacity: 360 – Matrix Type ATC. NC System: FS-31IA (MAPPS 4). Pallet Changer: 21 RPP – Vertical Pallet Stocker Cell. Customer Factory Voltage (V): 220 V. Spindle 20,000 RPM. Spindle Hole Taper (CAT #40): 7/24 Taper (Two-Face Contact) #40. Retention Knob Standard (#40): 90 Degree. Rapid Traverse Rate (M/Min): 50 M/Min. Linear APC Setup Station Arrangement: On Machine. Control System: Interface Only. Steps of Pallet Stand: 2 Steps Style. Number of Machines For Linear APC: 1 Machine. Number of Setup Stations For Linear APC: 1 Setup Station. Pallet Size: 400 Square. Full 4th Axis Rotary Table. Chip Disposal Direction: Rear Disposal Type. Chip Conveyor Outside Machine: Provided. Type of Chip Conveyor Outside Machine: Scraper (Drum Filter Type). Through-Spindle Coolant System: Side Through. Through-Spindle Coolant System (Unit): Interface Only. Through-Spindle Coolant System Interface Type: Ogura Clutch/Shinano Kikou I/F. Shower Coolant Discharge Pressure: Standard. In-Machine Work Measuring System (Spindle): Optical Type Probe Sensor (Renishaw). In-Machine Work Measuring System (Table): Table Mount Sensor (Renishaw). Part Program Strage (Byte): 512 Kbyte (1280 M). Remote Communication Function: Fast Data Server (100Base-TX). User Memory Area(Built-In MAPPS): 1 GB. Number of Tool Offset Pairs: 400. Number of Work Coordinate System Pairs: 300. Number of Custom Macro Common Variables: 600. Tool Life Management: Provided. Additional Number of Tool Life Management: Provided (Max: 1024 Pairs).

Liberty Machine Works LLC. DMG MORI DMC 125 U2 (2006). Removed from power due to a routine upgrade. In great shape and ready to go! The spindle was replaced in 2016. Comes with some manuals. 15,400 (cutting) hours. Chip Conveyor, Tool Changer, Filter System, Pallet Changer. To the best of our knowledge all details listed below are deemed correct. Number Of Tables / Pallets 2 Table Size 39.4″ x 31.5″ Weight On Table 4409 Lbs. X – Axis Travel 49.2″ Y – Axis Travel 49.2″ Z – Axis Travel 39.4″ A – Axis Indexing – 120, + 10 DEGREE B – Axis Indexing -30 to 180 DEGREE C – Axis Indexing 360 DEGREE Rapid Traverse X, Y, Z 2362, 2362, 2362 IPM Spindle Speed 18,000 RPM Spindle Taper HSK – A63 Main Motor 46.9 HP Tools in toolchanger 180 Main Machine Dimensions 10′ x 19′ 6″ x 11′ 6″ Weight 40,000 Tool changer Dimensions 8′ 3″ x 18′ 3″ x 10′ 3″ Weight 17,000 lbs.

Kitamura Mycenter 3X APC VMC with Yasnac Control, New 1998, Automatic Pallet Changer, over 50 BT40 Tool Holders included with sale! Machine was taken out of service in March 2023. Videos under power available upon request.

Mori Seki Cnc Milling Machine Tv300 Pallet Changer. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “brannonmachine” and is located in this country: US. This item can be shipped to United States.

• Model: Tv300
• Control: CNC
• Machine Type: Vertical Milling Machine