Grizzly G0704 MILL POWER DRAWBAR. I made one for my mill and loved it so much I made another. Comes with a metal template to drill the 4 mounting holes in the green cover on a Grizzly G0704 mill only. Has an adapter nut to fit over the square nut on the original spindle. It will have to be connected to compressed air to work the brand new butterfly impact wrench. The one picture shows mine mounted. These Chinese mills are not very precision mane so there is a bit of a wop on their spindle, but I work through it. I will add hand written instructions for mounting it. The item “Grizzly G0704 MILL POWER DRAWBAR. Make me an offer” is in sale since Sunday, November 1, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “pretoriaboy” and is located in Piedmont, South Carolina. This item can be shipped to United States.

• Brand: Grizzly
• Function: Milling
• Model Year: Unknown
• Control: Manual
• Machine Type: Milling Machine
• Power Source: Pneumatic

1981 Vertical CNC Milling Machine, Matsuura MC-500V Mini-Master with YASNAC 3000 Control and 50 tool Holders. Well taken care of and also comes with a phase converter. The item “1981 Vertical Cnc Milling Machine, Matsuura MC-500V Mini-Master with 50 tools” is in sale since Tuesday, March 9, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “nauglefab” and is located in Newburg, Pennsylvania. This item can be shipped to United States.

• Brand: Matsuura
• Model Year: 1981
• Control: CNC
• Machine Type: Milling Machine
• Voltage: 240 V
• Function: Milling
• Power Source: Electric
• Spindle Horsepower: 10 hp

Fadal 914-15 VMC Vertical CNC Mill. Fadal CNC 88HS Controls. 5HP / 3 Phase / 230/440 Volt. 16″ x 38″ Table. Tool Changer missing parts (refer to photo). We have the equipment to load onto any type of truck or trailer for you. The mill can be inspected by contacting me and setting up a time to do so, this is highly recommended. If you have any additional questions please contact me. The item “Fadal VMC 914-15 Vertical CNC Mill” is in sale since Saturday, May 8, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “mac71180″ and is located in Kearney, Missouri. This item can’t be shipped, the buyer must pick up the item.

• Brand: Fadal
• Function: Milling
• Control: CNC
• Model: Fadal VMC 914 – 15

Gigabyte BRIX GB-BXBT-1900 (PC Controller – Path Piot). PN 31761 – 8 Digital Height Gauge. PN 31713 – Granite Surface Plate for TTS Toolholders. PN 30244 – Keyless Drill Chuck JT2. PN 30102 – Drill Chuck JT1. PN 35356 – TTS Coller R8. PN 30302 – TTS Tool Tray. 3/8 Set Screw TTS. 1/2 Set Screw TTS. ER20 TTS (with end mill and collet). PN 37367 – Sq. PN 37368 – Ba. PN 37370 – Sq. PN 37371 – Ba. PN 37372 – Sq. PN 37373 – Cr. PN 37374 – Sq. PN 37375 – Cr. Kodiak B007BTPW88 – 0.088 2FL SQ MICRO EM Altin coated End Mill. Kodiak B007BTPCJ2 – 1/16 SE 2FL S/C Micrograin Carbide Altin coated End Mill. Kodiak #132449 1/32 2FL Carbide Altin coated End Mill. The item “Tormach 770M CNC Milling Machine Less Than 20 Minutes Run Time” is in sale since Tuesday, July 6, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “kmma04″ and is located in Lake Jackson, Texas. This item can’t be shipped, the buyer must pick up the item.

• Model: Tormach 770M
• Machine Type: Milling Machine
• Model Year: 2019
• Power Source: Electric
• MPN: 770M
• Function: Drilling
• Brand: Tormach
• Control: CNC
• Voltage: 110 V

Micro Kinetics CNC Express XL Milling Machine, 2010 – With Tooling. We are pleased to offer the following for your consideration. Knee Mills – CNC. Z-Axis Travel: 4.75. Head Movement: Tilt 90 Degrees Left, Tilt 90 Degrees Right. Spindle Speed: 100 to 3200 RPM. Spindle Motor: 2 HP AC. Table Size: 9 3/8″ x 39 1/2″. Revelation Machinery encourages first-hand inspection of all used machinery. Please verify all of the specs listed for this machine. Listing and template services provided by inkFrog. The item “Micro Kinetics CNC Express XL Milling Machine, 2010 With Tooling” is in sale since Wednesday, October 7, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “revelationmachinery” and is located in Antioch, Tennessee. This item can be shipped to United States.

Van Aliso Enterprises Inc is in the business of representing quality used machine tools. Price is loaded on your truck at our warehouse in Santa Paula CA, unless otherwise specified. We encourage you to come and inspect the machines under power in our warehouse at your convenience as the listing below is just a guideline and is not guaranteed to be accurate. LOOK UP VAN ALISO ENTERPRISES IN GOOGLE TO FIND CONTACT INFO. 2015/2014 Haas VF3 We have 2 machines equipped exactly the same. 24 pocket side mount tool changer. Items less than 100 lbs. The item “2015 Haas VF-3 3-Axis CNC Vertical Machining Center, 1000 PSI TSC, Probing” is in sale since Tuesday, June 29, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “vaeinc1″ and is located in Santa Paula, California. This item can’t be shipped, the buyer must pick up the item.

• Model: VF-3
• Spindle Horsepower: 30.0 hp
• Machine Type: Machining Center
• Max Spindle Speed (RPM): 7500 rpm
• Model Year: 2015
• Power Source: Electric
• X-Axis Travel Bed: 40 in
• Y-Axis Travel Bed: 26 in
• Z-Axis Travel Bed: 25 in
• Spindle Taper: CT-40
• Function: Milling
• Brand: Haas
• Control: CNC

4 axis w/ closed loop steppers on all axes. Auto or manual lube of balljoints and ways (factory). Limit switches for X, Y and Z travel (factory). Factory hand scraped on all mating and sliding surfaces. Very light use, excellent condition. Up for sale is my early model Denford Triac in excellent condition It runs Linux CNC on a Pico Universal Stepper controller. All axes are closed loop stepper motors for maximum precision. This is one of the early models where they made them the highest precision and most solid builds. For example, on this model, not only are the ways and gibs scraped in on both sides, but also where the Z column bolts into the X&Y base. Later machines were ground on one side, scraped on the other, then scraped on both. The spindle head casting is about 55 lbs on this model as opposed to about 30 on later models, and the geometry makes it more solid against angular deflections. The new models are accurate as well, but the early ones make really nice precision cuts, The 4th axis is(Chuck body and adapter plate not included) a conversion from an import 4 rotary wheel. Little Machine Shop has adapters and chucks available for this type of rotary table. The Triac itself was manufactured in the UK as a CNC machine. Gibs are the prismatic type, also scraped in on all contacting sides. The spindle is R8 and a set of collets is included, but it also works well on the TTS system. As for the motor, it worked fine for me but can be easily upgraded to a modern servo. According to the Denford forums, some people are even boring out the spindle housing and fitting high speed spindles with good results. There is nothing mechanically stopping you from raising the Z column. It would just require 2 bars about 1 3/4 wide and precision ground down to what you want height to raise it to. Compared to a Tormach, this is much higher quality build. You can find blueprints of Tormach’s scraping online, and it looks low quality. Maybe they improved that. The Triac is 80s Sheffield iron casting, hand scraped by someone who most likely did it as a lifetime craft. The Z column casting is about 3/8 walls throughout. All of this shows in the quality of cuts. The machine shows minimal wear on the ways and the table surface is flawless. Denford as a company still makes CNC machines. They stock some parts for the Triac, and can usually get a drawing of what they dont have. They also have an active forum for their old machines with original drawings, retrofits, etc. LinuxCNC is a powerful free software with a thriving forum and regular updates. PathPilot is LinuxCNC with a proprietary UI. This machine is running AXIS, a common LinuxCNC program. A touchscreen version has been recently made if you want that. With this hardware and software setup, you can add physical speed and feed overrides, an MPG, etc. It works good with the “Generic Enhanced Machine Controller (EMC)” mill post processor if you use Fusion360. EMC is the old name of LinuxCNC. It should work with the Tormach Path Pilot pp as well, as it uses LinuxCNC commands. There are factory homing sensors, but they are the 2 wire type that need some kind of amplifier. If you want home sensors, they would best be replaced with the 3 wire type. It breaks down into somewhat liftable. The machine specs are in the photos. It is 110v, not 220. Contact me for more photos or information. The item “Denford Triac 4 Axis CNC Mill” is in sale since Saturday, June 26, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “dgun99″ and is located in Los Angeles, California. This item can’t be shipped, the buyer must pick up the item.

• Model: Denford Triac 4
• Modified Item: Yes
• Machine Type: Milling Machine
• Function: Milling
• Modification Description: 4th Axis, modern electronics
• Control: CNC

Digital Readout Kits for Milling Machines or Lathes. The digital readouts in this listing are the metal cased Sinpo type. The Sinpo DRO III 3-axis is the 3-axis digital readout for milling machines, lathes boring machines etc, The Sinpo DRO III 2-axis is the 2-axis digiital readout for lathes and milling machine or grinding machine applications. The kits can also be fitted to Grinding machines or EDM sparc eroders. In this listing the price incluse scales in sizes upto 950mm. I have linear scales in stock in sizes upto 3000mm and magnetic tape for longer axis, but the cost rises steeply when measuring lengths rise above 1000mm – so I have to quote separately for linear scales with measuring lengths a meter or longer. Please contact me for longer scales and a separate listing would be created for the scale sizes you require. Most machines – for scale measuring lengths upto 950mm – will have standard section JCXE linear scales fitted – but often lathe cross slides and smaller milling machines, will have slim scales. The standard section linear scales are JCXE scales and are available from 150mm to 950mm – longer measuring lengths are available but at extra cost. The slim scales are available for this cost between 70mm and 320mm – again longer options are available at extra cost. I have a large variety of sizes and types of linear scales in stock, so can advice you on which type might fit your machine best. If you require a quicker service, please contact me for the costs and options available. The item “Digital Readout and LInear Measuring Scales (DRO Kit)” is in sale since Friday, April 3, 2020. This item is in the category “Business, Office & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “3977colin” and is located in Nottingham. This item can be shipped to all countries in Europe, Antigua and barbuda, Australia, United States, Bahrain, Canada, Brazil, Japan, New Zealand, China, Israel, Hong Kong, Indonesia, Malaysia, Mexico, Singapore, South Korea, Taiwan, Thailand, Bangladesh, Belize, Bermuda, Bolivia, Barbados, Brunei darussalam, Cayman islands, Dominica, Ecuador, Egypt, Guadeloupe, Grenada, French guiana, Jordan, Cambodia, Saint kitts and nevis, Saint lucia, Sri lanka, Macao, Maldives, Montserrat, Martinique, Nicaragua, Oman, Pakistan, Peru, Paraguay, Reunion, Turks and caicos islands, Aruba, Saudi arabia, South africa, United arab emirates, Chile, Bahamas, Colombia, Costa rica, Guatemala, Honduras, Jamaica, Kuwait, Panama, Philippines, Qatar, Trinidad and tobago, Uruguay, Viet nam.

• Country/Region of Manufacture: China
• Machine Type: All Machines
• Power Source: Electric
• MPN: Does Not Apply
• Brand: Sinpo

Optometry Eyeglass Optical Lens Cutter Cutting Milling Machine CP-4A. Only for resin lens. Can cut lens with thickness less than 1.61 cm. With a knob to control the size of lens to cut. Put a lens which has been marked the axis on lens meter and layout blocker into the position of lens and then fix it by left knob and be ready to cut. Application: Can be used to cut resin lens(CR-39) with abbe below 1.61. Cutting effect: Plat side. Adjusting Size Range: -8 +8 (-8 means: the same size as pattern, 0 means 0.5 mm bigger than the pattern; +8 means 1.0 mm bigger than the pattern). Cutting Speed: 30 s per lens. The voltage could be 110 V or 220 V optionally. If you need something different, please send us a message. The amount of tariff is composed of two parts. The item “Optical Lens Cutter Lens Milling Machine CP-4A, Size Adjustable, Resin Lens Only” is in sale since Monday, September 2, 2013. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “zhuofei3371″ and is located in Nanjing. This item can be shipped worldwide.

Tree 425 Retro fit Cnc milling machine 3 axis… This machine is a Retro fit project i was going to do but never did.. Also comes with alot of tooling.. If you have any questions just ask. The item “Tree 425 Retro fit 3 axis Cnc milling machine” is in sale since Thursday, July 25, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “ethensyardsale” and is located in Morganton, North Carolina. This item can’t be shipped, the buyer must pick up the item.

• Control: CNC
• Machine Type: Milling Machine
• Model: Cnc 425