MILLING MACHINE GOOD CONDITION / WORKS GREAT / 110 VOLT. MADE IN TAIWAN / NO RUN OUT (NO WOBBLE) / RONG FU RF-30 / ENCO / RUTLAND. COULD USE CLEAN AND OIL. The item “MILLING MACHINE RF-30 RONG FU RUTLAND ENCO BENCH TOP MILL MADE IN TAIWAN R8″ is in sale since Thursday, December 2, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “equipmentfinder03″ and is located in North Hills, California. This item can’t be shipped, the buyer must pick up the item.

• Model: RF-30
• Country/Region of Manufacture: Taiwan
• Machine Type: Milling Machine
• Power Source: Electric
• Function: Drilling
• Brand: ENCO / RONG FU
• Voltage: 110 V

Bridgeport TC3G Torq Cut VMC CNC Machining Center with Rigid Tapping. Bridgeport TC3G Torq Cut with Rigid Tapping Table Size-36″ x 14″ Machine Travels (X/Y/Z) -30″ x 16″ x 20″ Spindle To Table Distance -4.92″ – 24.92 Table Capacity -2,000 Lbs. Spindle Taper -BT 40 Taper Spindle Speeds -10,000 Max RPM Transmission -Direct Drive Rapid Traverse Rate (X/Y/Z) -826 /826 /710 IPM Maximum Cutting Feed Rate. 1-826 IPM /. 1-710 IPM (Z) Tool Changer Style -Carousel Tool Changer Capacity -22 Tools Spindle Drive -9.5 HP 240V 3 Phase 60 Hz Full Load 50 Amps. All information deemed accurate but may vary from model to model. Contact Larry for any questions you may have. Google “Larry Razza” to see more information & videos of our equipment! L R Associates, Inc. Fast Application, its all filled in for you.. Online leasing applications (get LOW monthly payments). Please Note: Not all machines may qualify for Leasing. Payments: We accept all Major Credit Cards, Bank Wires, Company and Personal Checks. We always get better rates.. CONDITIONS: All quotations are for immediate acceptance. They are subject to withdrawal, change and prior sale without notice. All orders received are binding only when they have been accepted and acknowledged by us in writing. Unless otherwise specified, prices quoted are F. Care is taken to give reliable specifications, but these are not guaranteed. We reserve the right to correct typographical errors. INDEMNIFICATION: Used Machines may not incorporate approved activating mechanisms, operator safety devices or safety guards as required by OSHA or otherwise. It is the user’s responsibility that the said machines be so equipped and safeguarded to meet OSHA and any other requirements before placing such machinery into operation. The item “Bridgeport TC3G VMC Vertical Machining Center CNC Milling Machine Mill Pristine” is in sale since Sunday, November 15, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “palmtreespecialties” and is located in Providence, Rhode Island. This item can be shipped to United States.

• Model: TC3G
• Spindle Horsepower: 9.5 hp
• Country/Region of Manufacture: United States
• Machine Type: Machining Center
• Max Spindle Speed (RPM): 10,000
• Model Year: 1999
• Power Source: Electric
• MPN: TC3G
• Spindle Taper: BT 40
• UPC: Does not apply
• Function: Drilling
• Brand: Bridgeport
• Control: CNC
• Voltage: 220 V

Los Angeles Scottsdale Chicago Toronto. Financing Available at low rates. See Machines In Action. HAAS SUPER MINI MILL. TABLE SIZE: 36″ X 12″. NUMBER OF T SLOTS: 3. MAXIMUM TABLE WEIGHT: 500 LBS. MAXIMUM SPINDLE SPEED: 10,000 RPM. MINIMUM / MAXIMUM SPINDLE NOSE TO TABLE: 4″/14″. X, Y, Z RAPIDS: 1,200 IPM. TOOL CHANGER CAPACITY: 10. TOOL TO TOOL TIME: 2.8 SECONDS. Machinery Resources International has emerged as one of the premier names in the worldwide industrial machinery resale marketplace. With over 60 combined years in the business, customers can count on our experienced and seasoned professionals to find you the best deal for your machinery. As proud members of the MDNA, AMEA, and NAA, we hold ourselves to a higher standard. Make MRI your #1 choice for your manufacturing equipment needs! MRI is one of the premier names in the worldwide industrial machinery resale business. With over 60 combined years in the business, customers can count on our experienced and seasoned professionals. The item “HAAS SUPER MINI MILL CNC VERTICAL MACHINING CENTER NEW 2006 AG” is in sale since Friday, November 19, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “machinery_resources” and is located in Simi Valley, California. This item can’t be shipped, the buyer must pick up the item.

• Model: SUPER MINI MILL
• Machine Type: CNC VERTICAL MACHINING CENTER
• Table Length: 36″
• Model Year: 2006
• X-Axis Travel Bed: 16″
• Y-Axis Travel Bed: 12″
• Z-Axis Travel Bed: 10″
• Spindle Taper: CAT 40
• Brand: HAAS
• Table Width: 12″
• Control: HAAS

Atlas horizontal milling machine. Specifications: Model: MF Spindle Speeds: 61 – 2860 RPM Table Size: 18″ x 4-1/2″ Power Feed: X Axis only Phase: 1 Voltage: 115/230v Approx. Atlas Horizontal Milling Machine Mill 18\” x 4-1/2\” Table 1 PH 115/230v 1/2 HP. Spindle Speeds: 61 – 2860 RPM. Table Size: 18″ x 4-1/2″. Power Feed: X Axis only. Condition: Good working (see video). Please contact for Quote. Mullett Industrial Sales contact info. Office: 313.444.3268. Also please check out our website! Auctiva offers Free Image Hosting and Editing. Track Page Views With. Auctiva’s FREE Counter. The item “Atlas MF Horizontal Milling Machine Mill 18 x 4-1/2 Table 1 PH 115/230v 1/2 HP” is in sale since Tuesday, December 14, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “mullettindustrialsales” and is located in Clare, Michigan. This item can be shipped to United States.

It is in great working order and very smooth. I will include new Kurt 8 vise all my tooling which includes lots of end mills and a couple roughing mills. Comes with a full set of collets also. If you have any questions, feel free to ask, thanks! The item “Bridgeport 9×48 inch 2 HP Vertical Milling Machine DRO tooling” is in sale since Monday, December 6, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “bachbuiltchoppers” and is located in Youngstown, Ohio. This item can’t be shipped, the buyer must pick up the item.

• Model: Bridgeport 9×48
• Brand: Bridgeport
• Spindle Horsepower: 2 hp
• Function: Milling
• Machine Type: Milling Machine
• MPN: 234703

2017 Tormach PCNC 1100. In good working order, but does have paint peeling from the coolant and chips over the years. New spindle bearings were installed about 6 months ago. I just replaced all of the windows with thicker 1/4 Lexan. It was my daily work machine until I upgraded to a VMC and now I just don’t use it anymore. 12 ER20 TTS Tool Holders and various collets. 1 ER32 TTS Tool Holder. TTS ER Collet Tap Holder: ER20. Wireless Network Adapter for PathPilot Controller. Compact TTS Tool Tightening Fixture. Small Granite Surface Plate with Integrated Tool Hole. Pneumatic Hose Kit for Power Drawbar. Power Drawbar Foot Pedal Kit. PCNC 1100 Power Drawbar. PCNC 1100 Deluxe Machine Stand. Full Enclosure Kit for PCNC 1100. The item “Tormach 1100 PCNC Personal CNC Mill” is in sale since Monday, December 13, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “chjade84″ and is located in Fort Wayne, Indiana. This item can’t be shipped, the buyer must pick up the item.

• Brand: Tormach
• Function: engraving
• Control: CNC
• Machine Type: Milling Machine
• Voltage: 240 V
• Model: Tormach 1100

Benchmaster MV2 milling machine, with both horizontal and vertical milling set-ups (heads). Bench master milling machine complete. Benchmaster vertical milling head complete with motor, pulley, motor mount, and all supports. Benchmaster horizontal milling head complete with motor, pulley, motor mount and all supports. 100+ various mills, tapers, cutters, adapters, tooling, fixtures and hardware. New drive belt mounted and two spares included, one being the original Benchmaster marked belt. Benchmaster info sheets, pics, prices and instructions. Condition:This machine is very tight and was used only as a hobby machinist machine. All parts are original including motors, no modifications, no damage or abuse shown anywhere. This machine was professionally disassembled, cleaned, lubricated and adjusted about three years ago, and has seen maybe 20 minutes of use since. The ways and working surfaces were all pristine, evidence that it was never used for production work. The machine runs smoothly, no motor smells while running. The electrical plug and switch are original, and the cord was replaced with a new period correct one. I was tempted to paint the machine while disassembled, but in this age of’original condition is king’ I elected not to. The machine is clean and a paint job will be simple. The machine has been in my possession for more than 30 years and has been stored in my dry humidity controlled shop during my ownership. I will assist you or your shipper with loading. I will pack and box up the various bits and pieces in a suitable container if needed. Happy to answer all questions and provide additional pictures as requested. The item “Benchmaster MV2 milling machine, Vertical & Horizontal, tight little use, tooling” is in sale since Tuesday, December 14, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “manx11″ and is located in Bethany, Connecticut. This item can’t be shipped, the buyer must pick up the item.

• Function: Milling
• Machine Type: Milling Machine
• Model: Benchmaster MV2

KITAMURA Mycenter-2 Vertical CNC Mill. In good working condition. Available to view under power. Fanuc 0-M CNC Control. 330 x 762 mm. Distance from Table Surface to Spindle Nose. 125 – 585 mm. Distance from Column Slide Way to Table Center. 8.5″ – 21.5″. 215 – 545 mm. 20 – 7000 rpm. Rapid Feed, X / Y Axis. Rapid Feed, Z Axis. 0.04 – 197 ipm. 1 – 5000 mm/min. Tool Dia x Length. 3″ x 9.8″. 76.2 x 250 mm. 73.7″ x 73″. 1872 x 1855 mm. Specifications subject to verification. Items over 1000 lbs. We will not palletize, skid or crate an item over 1000 lbs. These items are prepared for transit by wrapping the item’s electrical components with stretch wrap and spraying down any exposed metal surfaces with protective oil. This is usually the case with top-heavy items, such as grinding machines. MACHINE DIMENSIONS: 80″ x 80″ x 95H. MACHINE WEIGHT: 5600 lbs. We accept all major credit cards except American Express. Orders are not processed until theyre paid in full. The item “KITAMURA Mycenter -2 CNC Mill 13×20 Travels 7000 rpm, FANUC 0-M Control” is in sale since Monday, July 12, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “machinery_exchange” and is located in Chatsworth, California. This item can be shipped to United States.

• Model: Mycenter-2
• Country/Region of Manufacture: Japan
• Machine Type: Milling Machine
• Function: Milling
• Brand: Kitamura
• Control: CNC