This machine was acquired by me after a local machinist had died. He had bought it intending to get it up and running. As far as I know everything is there to make it go. It has the original electric schematic if you need that. Any questions let me know. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “hyd.jack” and is located in this country: US. This item can be shipped to United States.

• Model: Journeyman 320
• Spindle Horsepower: 5 hp
• Machine Type: Milling Machine
• Table Length: 10 in – 14.9 in
• Max Spindle Speed (RPM): 5001 – 7500
• Model Year: 1987
• Power Source: Electric
• X-Axis Travel Bed: 26 in – 30 in
• Y-Axis Travel Bed: 10 in – 15 in
• Z-Axis Travel Bed: Less than 10 in
• Spindle Taper: CAT 40
• Function: Milling
• Brand: Tree
• Table Width: Over 40 in
• Control: CNC, Manual
• Voltage: 230 V

Milling machine accessory – ALIGN Power Feed for Z-Axis AL-500PZ fits Bridgeport. Brand: ALIGN Model #: AL-500PZ. Power Table Feed for Bridgeport-style milling machines (For Z-axis). AL-500PZ is used for the Z-axis (milling machine knee up/down). Automatic shut-off at end of cut. Travel stop/ limit switch assembly with rail. Packaged in eco-friendly box without styrofoam. Torque, Average: 150 in-lb Torque, Peak: 650 in-lb. Speed range: 4 160 rpm, 200 rpm max. Power source: 110VAC 50/60Hz Single-phase. If You have any questions regarding this item, please let us know we’ll be happy to help. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “eisenmachineryinc” and is located in this country: US. This item can be shipped worldwide.

• Brand: ALIGN
• MPN: AL-500PZ
• Model: AL-500PZ
• Country/Region of Manufacture: Taiwan

Item: LED 3 Antis Machine Light. Material:Thicken high-quality aviation aluminum + tempered glass. IP grand: IP67 (Waterproof, Oil-proof, Dust-proof). Power:6W / 10W /12W / 16W / 20W / 28W / 30W. Installation:fixed by screws. Light angle: 120 °. Using high brightness LED chip technology, low light-declinig, long lifetime. They are provided with more superior performance than traditional halogan lamps. Drive using high quality components, no strobe, large margin. Protection level up to IP67. Suitable for working environment exposed to water, fog and oil. High-strength tempered glass can withstand higher impact force without damage to the luminous surface. 360deg rotating bracket design which can change the irradiating angle to an ideal state. With integrated design, alloy aluminum, surface anodized without discoloration, fine workmanship, good heat disspation performance. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “burnerworld-2″ and is located in this country: CN. This item can be shipped worldwide.

• Power: 16W (24V~36V) length 580mm
• Country/Region of Manufacture: China
• Brand: Unbranded
• Machine Type: Milling Machine

Milling machine accessory – ALIGN Power Feed for Y-Axis AL-400SY fits Bridgeport. Made in Taiwan Power Table Feed for Bridgeport-style milling machines (For Y-axis) Model #: AL-400SY Used for the Y-axis Variable speed control Rapid traverse button Automatic shut-off at end of cut On-off switch Travel stop/ limit switch assembly Complete installation hardware included Torque, Average: 150 in-lb Torque, Peak: 550 in-lb Speed range: 0 200 rpm, 200 rpm max Power source: 110VAC 50/60Hz Single-phase. If You have any questions regarding this item, please let us know we’ll be happy to help. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “eisenmachineryinc” and is located in this country: US. This item can be shipped worldwide.

• Brand: ALIGN
• MPN: AL-400SY
• Model: AL-400SY
• Country/Region of Manufacture: Taiwan

A&T Universal Air Power Drawbar. Machinist changes tools manually 10-15 times per day at 3 minutes per tool change. By installing the Air Power Drawbar unit, machinists change tools within seconds and eliminate the need to climb for the drawbar and the use of ¾ wrench. With the use of A&T Air Power Drawbar unit, one can save approximately 12 hours per month. The unit can be installed within 25 minutes without any special drawbar needed. 19 mm socket for R-8 or 30 taper and 21 mm socket for 40 taper spindles. The unit is powered by shop air 90 P. I without electrical wiring and also no drilling or tapping is required for variable speed mill head. A uniquely designed air motor with some parts made from nickel, chrome tungsten alloy steel. Operators can change tools with control valve pushed button to engage or disengage the tools. Model #: ADB-300 V. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “jojo9000c” and is located in this country: US. This item can be shipped worldwide.

• Machine Type: Milling Machine
• Model: ANT-300V
• Country/Region of Manufacture: Taiwan

NTC Nippei Toyama Corporation. An older machine but gets the job done. Fanuc Control Made in Japan. Item location: Fraser, MI 48026 (15 miles north from Detroit, MI). This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “jozef1017″ and is located in this country: US. This item can be shipped to United States.

• Model: TMC-50VE
• Function: Milling
• Brand: NTC Nippei Toyama Corporation
• Control: CNC

Milling Cutter End Mill 3 Blades 3 Teeth 45mm-90mm Length GB Standard M1.0×0.25. Features: 100% brand new high quality Made of high-quality materials for durability Fast cutting speed, easy to use, affordable, triple thread thread milling cutter, high precision and long service life No burr in cutting, sharp and wear-resistant cutting edge, good chip removal, high processing efficiency, precise thread and higher durability. Ultra-fine particles, the bar adopts a new type of ultra-fine particle bar, and the high rigidity and wear resistance of the grinding tool provide a strong guarantee for the service life. The new tool type design adopts an excellent new blade type, the surface is smooth, not easy to chip, enhances the rigidity of the tool, takes into account the rigidity of the tool and the chip removal performance, and makes the cutting and chip removal of the tool more stable. High-density coating, using high-density coating technology, wear resistance and effective heat insulation, ensure a long service life of the tool. Universal round shank, to achieve extremely small runout, cylindrical grinding and step difference, 1µ roundness, 2µ straightness, to achieve extremely small runout. Product parameters: Product name: Three-tooth milling cutter Optional specifications: M1.00.25, M1.20.25, M1.40.3, M1.60.35, M1.80.35, M2.00.4, M2.20.45, M2.5 0.45, M30.5, M3.50.6, M40.7, M4.50.75, M50.8, M61.0, M81.25, M101.5, M121.75, M142.0, M162.0, M202.5, M40.5, M60.75, M81.0, M101.25, M121.5, M161.5, M201.5, M243.0 Number of blades: 3 blades Material: high quality tungsten steel Standard: GB Such as: M1.0×0.25 (M1.0 = blade diameter, 0.25 = blade spacing) (see the picture for details) Blade diameter: 0.73mm-16mm Shank diameter: 4mm-16mm Blade length: 4mm-16mm Overall length: 45mm-90mm Size: M1.0M16 such as: M1.0×0.25 (M1.0=insert diameter, 0.25=insert pitch) (please see the picture for details) Application: copper, stainless steel, cast iron, tool steel, alloy steel, graphite, plastic, composite materials, etc. Machines: Cnc machining centers, engraving machines, engraving machines and other high-speed machines. Package list: 1 Three tooth milling cutter Note: 1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness. Please allow slight manual measurement deviation for the data. Please kindly note that. Also, the each additional item means. The the same color and size. Transit time may be a little delayed because of the. If you have any questions. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “onlymall” and is located in this country: CN. This item can be shipped worldwide.

• Size: M20*2.5
• Brand: Unbranded
• Package Contents: 1 * Three tooth milling cutter
• Product name: Three-tooth milling cutter
• Number of blades: 3 blades
• Standard: GB
• Blade length: 4mm-16mm
• Overall length: 45mm-90mm