Decided to pivot to a different project, so this needs to go. Brand new ball screws, never installed. This kit was very hard to source because the owner of HM CNC passed away a few years ago and no one is making them.

Benchmaster MV2 milling machine, with both horizontal and vertical milling set-ups (heads). Bench master milling machine complete. Benchmaster vertical milling head complete with motor, pulley, motor mount, and all supports. Benchmaster horizontal milling head complete with motor, pulley, motor mount and all supports. 100+ various mills, tapers, cutters, adapters, tooling, fixtures and hardware. New drive belt mounted and two spares included, one being the original Benchmaster marked belt. Benchmaster info sheets, pics, prices and instructions. Condition:This machine is very tight and was used only as a hobby machinist machine. All parts are original including motors, no modifications, no damage or abuse shown anywhere. This machine was professionally disassembled, cleaned, lubricated and adjusted about three years ago, and has seen maybe 20 minutes of use since. The ways and working surfaces were all pristine, evidence that it was never used for production work. The machine runs smoothly, no motor smells while running. The electrical plug and switch are original, and the cord was replaced with a new period correct one. I was tempted to paint the machine while disassembled, but in this age of’original condition is king’ I elected not to. The machine is clean and a paint job will be simple. The machine has been in my possession for more than 30 years and has been stored in my dry humidity controlled shop during my ownership. I will assist you or your shipper with loading. I will pack and box up the various bits and pieces in a suitable container if needed. Happy to answer all questions and provide additional pictures as requested. The item “Benchmaster MV2 milling machine, Vertical & Horizontal, tight little use, tooling” is in sale since Tuesday, December 14, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “manx11″ and is located in Bethany, Connecticut. This item can’t be shipped, the buyer must pick up the item.

• Function: Milling
• Machine Type: Milling Machine
• Model: Benchmaster MV2

3 C7 ball screws and ball nuts. 200 pitch (or metric equivalent). 3 helical zero backlash couplings (specify motor shaft diameter). 3 sets of thrust bearings. Anodizing available upon request. Y axis front way cover. Y Axis mounts on the left side of the headstock and column to provide easy access to gib adjustment screws on the right side of the headstock. The item “X2D (Little Machine Shop) cnc mill conversion kit with metal Y axis way cover” is in sale since Sunday, June 23, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “miccan-57″ and is located in Spring, Texas. This item can be shipped to United States.

• Country/Region of Manufacture: China
• Machine Type: Vertical Milling Machine
• Power Source: Electric
• Function: Drilling
• Control: CNC

I added a welded machine stand with total locking casters. Lot includes all of the accessories in photo – too many to list out. Only used machine 1 time to test the tolerances. I’ve decided to sell because I now have access to a cnc machine at work. This is your chance to take home an awesome machine that is ready to run. Just upload the included Mach 3 control software that is configured and press go. Also includes a user manual and DVD that walks you through the entire setup. If you are interested in machining, prototyping, or gun smithing this is a perfect setup for you. The model 3502 CNC Milling Machine is a complete CNC solution that incorporates our time-tested model 3501 in a sturdy enclosure. It’s not a conversion or adaptation; this machine is designed and built by the factory as a CNC machine. The Model 3501 includes a one-shot lubrication system and an improved mill table that facilitates the use of flood coolant. This is the perfect mill for the machinist who wants to create parts and not just build a CNC machine. The power supplies and controllers are built into the mill. No extra cabinets, cables, or connectors are required. The model 3501 CNC milling machine even includes a 4th axis driver so you can add a 4th axis rotary table by simply plugging it in. With powerful NEMA 23 hybrid stepper motors connected by zero backlash jaw couplings to precision-ground ball screws, the model 3501 can achieve positioning accuracy to 0.0005. Not many hobby-grade machines can make a claim like that. It will machine at up to 20 inches per minute and rapid traverse at up to 80 inches per minute. A 2/3 horsepower closed loop brushless DC spindle motor and synchronized belt drive takes the spindle from 100 to 7000 rpm under full CNC control. A one-shot oiler with flexible shielded lube distribution tubing takes care of daily lubrication with a single press of a lever. With a work envelope of 10.2″ (X-axis) x 4.3″ (Y-axis) x 7.1 (Z-axis) the model 3501 has large capabilities in a small machine. The mill table is 15″ x 5.38″, giving you plenty of room to mount your work and fixtures. A software controlled receptacle on the back of the machine provides CNC control of an optional mist or flood coolant system. A safety E-stop button right on the front of the enclosure and the interlocked door shut down the mill instantly. 10.2″ × 4.3″ × 7.1 work envelope. Class 5 precision hardened and ground ball screws. Direct drive NEMA 23 hybrid stepper motors. Zero backlash jaw couplings. Three stepper drivers for X, Y, and Z axes. Extra stepper driver for 4th axis pre-wired with external socket. Variable spindle speed under full CNC control. Synchronous belt spindle drive (no gears). Proximity limit switches and homing on all three axes. USB interface board optically isolates the machine from the computer. Fully covered ways and ball screws. Emergency e-stop switch and chuck guard switch. CE marking (comparable to UL listing). CNC controlled coolant pump receptacle. Power supply and control system are integral to the machine. One shot oiler with flexible shielded lube distribution tubing. Industrial grade ABEC 5 angular contact spindle bearings. Dovetail slides with adjustable gibs. The item “LITTLE MACHINE SHOP CNC MILLING MACHINE & ACCESSORIES” is in sale since Monday, October 16, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “easye381″ and is located in Warrenton, Virginia. This item can’t be shipped, the buyer must pick up the item.

Great setup just dont have the time with a newborn and school. If you have any questions feel free to message me. This is a LMS 3990(Little Machine Shop) with a CNC FUSION Kit#5, Gecko 540 4-Axis Driver, and Automation Technologies Nema 23 270oz steppers(Antibacklash Couplers). It is being controlled by Mach 3 and a Lenovo ThinkCentre computer with Windows 7 Professional. I installed a temperature gauge to the G540 to make sure it stays in operating temperature range. There is an exhaust fan in the case and I do have a few more if you feel it needs them. Also comes with an Arduino Uno & vShield for a GRBL setup if you prefer. This is a great setup for someone, I just dont have the time to enjoy it. A lot of the accessories are still in packaging or I just took them out of packaging to display what comes with this bundle. Include in this bundle of goodies is as follows. 11 R8 Collets 1/8-3/4. Around 15 USA Made Double End 2-Flute Endmills Various Sizes. 6 Steel Machinist Square. 2- Standard Dial Indicators. 2- Mitutoyo Digital Indicators (Model# 543-492b). Cutting Oil For Dilution. Dial Indicator Spindle Clamp. 22 Piece Dial Indicator Tips. Air Spring & Original Manual Operation Parts. Arduino Uno & vshield For GRBL Setup. Extra Power Supply 24v. It Is Made Of 1×1 Steel Tubing And Has A Removable Tray Made Of HDPE. Plenty Of Aluminum To Get You Started. The item “Little Machine Shops Hi-Torque 3990 (Sieg X2) CNC Mill & Accessories” is in sale since Friday, September 29, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “hppowerkid” and is located in Toledo, Ohio. This item can’t be shipped, the buyer must pick up the item.

• Brand: Little Machine Shop Sieg LMS Grizzly Sherline Emco
• Model: 3990

Al 856 858 6421. The item “Bridgeport Milling Machine Very Nice & clean Little use in home shop” is in sale since Thursday, September 10, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “meekinsmusicboxes” and is located in Collingswood, New Jersey. This item can’t be shipped, the buyer must pick up the item.