1 x 3018 PRO machine. 1 x Emergency Stop. 2 x limit switches Board. 1 x U disk. 1 x Product Manual [English Version]. 1 x NO LASER / 5.5W /10W Laser module. 1 x Off-line controller. Thank you for your understanding. Control software: GRBL control. Work area: 300x180x45 mm (11.8×7.1×1.8″)Frame:420x350x270mm (16.53×13.78×10.63″). Screw: T8 screw, lead 4mm, double copper nut to eliminate backlash. Stepper motor: Nema17 stepper motor 1.3A, 0.25N. Collet: ER11 3.175mm(can be equipped with 0-7mm). Material: PA6 nylon + aluminum profile. Power supply:24V 5.6A power adapter (input voltage 110-240V). 775 Spindle Motor: 12-24VDC 10000RMP. Machining accuracy: about 0.2mm. 1CNC: G-code, TAB, NC, NCC files. 2 Laser: G-code, JPG, DXF file. If used in WIN10 system, performance is not stable. The new GRBL1.1f control board 1. GRBL1.1f firmware, stable performance. Offline engraving (optional offline module), ffline tool setting, engraving. The laser supports PWM/TTL signal control, the power is adjustable from 0-100%! Spindle supports PWM power 0-100% adjustable. Stepper motor overcurrent protection to avoid damage, upgrade integrated stepper motor drive, 2A high current, high stability. The laser directly enters the picture engraving, no programming, no design, Simple and convenient! Professional shell protection, the fan actively dissipates heat, and does not heat up for a long time. The engraving machine adds an emergency stop button & 3pcs of limit Switches.

Available for most manual & CNC Mills with standard R-8 collets or 30 or 40 Taper tool holders. Power Drawbars reduce tool change time and allow more cutting time in the cycle. The whole process using Kurt auto-matic or mechanical Power Locks cutsthe tool change time to 1/4 of the time required to change tools manually with wrenches. An added benefit is consistent on the drawbar rod. Operates on shop air supply, filter/lubricator, regulator and gauge included with each unit- provides clean oiled air to ensure long life. Available for most manual & CNC mills with standard R-8 collets or 30 or 40 taper tool holders. Automate your present “Knee-Type” milling machines by installing a Kurt PowerLock Drawbar. Power Lock Drawbars reduce tool change time and allow more cutting time in the cycle. The whole process using the Kurt mechanical PowerLock Drawbar cuts the tool change time to one-fourth the time required to change tools manually with wrenches. An added benefit is consistent torque on the drawbar rod. When you multiply the time savings for every tool change on all of your mills, it can really add up.

3 piece set: Type 3200/3500-200 Gehärtete umkehr-aufsatzbacken / hardened reversible jaw lathe chuck. From the stockroom of a closing industrial facility. Untested but presumed to be working well.