USED, MOTOR PULLEY FOR THE M HEAD. I PUT IT ON A MOTOR AND THE PULLEY RUNS FINE. NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION.

ROCKWELL HORIZONTAL MILLING MACHINE STEP PULLEY.

(No Stand or DRO are included in this listing). This machine requires a Standard 120V Power Supply! Highlights Of This Machine. Extremely Reliable, Brushless DC Variable Speed Motor Included Standard. Belt Drive Design, For Smoother, Quieter Running. Extra Large Column To Base Mount, Over 400% More Area, Makes A Much More Rigid Machine, Greatly Improved Over Other Machines In This Size Range. 3 Bolt Head to Column Mount is Standard, Also For Increased Rigidity. Runs in both Forward and Reverse, Good for Tapping. Larger Dials at Table Ends, Graduated in. 001, For Easier to Read, Accurate Table Movements. Leadscrews Are True Inch Pitch Screws (Not Metric Conversions Like Many), 10 Threads Per Inch. Variable Speed with Belt Drive and Brushless DC Motor. PM25MV (DC Brushless Motor and Belt Drive Head is Standard). End Milling Capacity 3/4? Face Milling Capacity 2/1/2? Cross Travel (Y Axis) 7? Longitudinal Travel (X Axis) 19? Table Leadscrew Pitch 10 TPI. Vertical Travel (Z Axis) 13? Max Distance Spindle to Table 13? Taper of Spindle R-8, with 7/16-20 Drawbar Thread. T Slot Size Actual size 12mm, our 1/2? Kit listed is sized for this machine. Range of Spindle Speeds 50-2500rpm, 2 Steps. Headstock Tilt Left & Right ±90°. Machine Height (Without Stand) 38-1/2. D (Top surface where machine mounts). Net Weight (Not Including Base) 275 LBS. Net Weight (With Base) Approx. Country of Origin: China. Power Required 110/120V, Minimum 15 Amp Circuit Approx. 5′ cord with standard 120V plug included. Average time delivered is 2-7 days depending on how far from Pittsburgh you are located. This listing is for the NON-DRO version. If you want the DRO version of this machine, please see our other listing. If you need liftgate service, please message us one you place your order to let us know. Quality Machine Tools / Precision Matthews Machinery Co. 1060 Montour West Industrial Park. We are machinists here too and have been in business for over 20 years. We know our machines and we know what we sell. So if there is any question, we can help.

WISCONSIN METALWORKING MACHINERY INC. BELT PULLEY HEAD SERIAL NUMBER………… 9″ X 42″ SPINDLE MOTOR………… 1 HP SPINDLE SPEEDS……….. 80-2720 RPM QUILL TRAVEL…………. 2,000 LBS ELECTRICS……………. EQUIPPED WITH: RISER DIGITAL READ OUT MISC. SPECIFICATIONS SUBJECT TO VERIFICATION. Cash or check with order, unless otherwise stated. All specifications and description of said goods are approximate only. MACHINE USE AND SAFETY. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “wismetcom” and is located in this country: US. This item can be shipped to United States.

• Brand: Bridgeport
• Function: Milling

Bridgeport Milling Machine Step Pulley Back Gear Parts Unit. See all pictures for the best description. Check out my other listings as well. Thank you for looking. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “mattpokerpro7750″ and is located in this country: US. This item can be shipped to United States.

• Brand: Bridgeport
• Machine Type: Milling Machine

Bridgeport Milling Machine 1 HP Step Pulley 42 Table Power Feed. The head is tuned up, tight table, good bearings, etc. We can install a digital readout or power feed for extra charge. We also stock Bridgeport vises as well if needed. Check out my other listings as well. Thank you for looking. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “mattpokerpro7750″ and is located in this country: US. This item can be shipped to United States.

• Brand: Bridgeport
• Spindle Horsepower: 1 hp
• Machine Type: Milling Machine

Bridgeport Milling Machine Step Pulley Head Parts Unit J HEAD. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “cncpa53″ and is located in this country: US. This item can be shipped to United States.

• Machine Type: Milling Machine
• Brand: Bridgeport

Wheeler Machinery Sales, Inc. 247 Pacific St Pomona CA 91768. Financing Available / Se Habla Español. Exacto 9″ x 42″ Step Pulley Milling Machine Servo Power Feed. Table: 9″ x 49″. Electrical: 3 phase 220 / 440 Volt. Servo 140 Power Feed. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “wheelermchy” and is located in this country: US. This item can be shipped to United States.

1 Phase, Step Pulley Mill Drill Machine. Very clean and gently used, also comes with coolant tank and coolant motor. 28-3/4″ Table Length x 8-1/4″ Table Width, 18-1/8″ Longitudinal Travel, 7-1/2″ Cross Travel, 12 Spindle Speeds, 2 hp, 110/220 Volts. Step pulleys are driven by a belt system that is manually changed to achieve a specific speed. They commonly feature 8 or 16 fixed speeds. Single-phase refers to one phase line (coil) that connects to and runs voltage through the motor. Single phase lines are not as efficient as three-phase motors. Machine phase would commonly match the type of electrical current used in the facility. The item “1 Phase, Step Pulley Mill Drill Machine” is in sale since Wednesday, August 18, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “avc_28″ and is located in Bensenville, Illinois. This item can be shipped to United States.

• Modified Item: Yes
• Spindle Horsepower: 2 hp
• Country/Region of Manufacture: Taiwan
• Machine Type: Mill Drill
• Table Length: 28-3/4
• Max Spindle Speed (RPM): 1720
• Power Source: Electric
• Modification Description: we add coolant tank and motor
• Function: Drilling
• Table Width: 8-1/4
• Control: Manual
• Voltage: 115 V

SMALL STEP BLOCKS FOR CLAMPING WORK DOWN ON MILLING MACHINES. COMES AS A SET OF EIGHT. The item “RDG TOOLS SET OF 8 MILLING MACHINE CLAMPING SMALL STEP BLOCKS” is in sale since Thursday, March 18, 2021. This item is in the category “Business, Office & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “rdg355″ and is located in YORKSHIRE. This item can be shipped worldwide.

• Machine Type: Vertical Milling Machine
• Function: Milling
• Brand: RDGTOOLS
• Control: Manual