Deckel gk21 pantograph spindle (read). This is an inherited project but appears to be complete except the spindle nut. No spindle nut is included! It appears that someone took this apart and cleaned it, even got new bearings, but possibly didn’t put it back together correctly. I think a bearing race may need pulled to correctly reassemble it. I’d be happy to take any additional photos or whatever is need to itemize all parts are there besides the missing spindle nut. This would be a great candidate to grind a new shaft with an ER collet taper. Stefan Gotteswinter covered it in a youtube video.

Deckel GK21 Pantograph main spindle. Came off a pantograph that was disassembled for parts. Spindle spins smoothly and freely and actuates up and down easily by using the lever.

For sale is an original Deckel milling/engraving spindle off of a GK21 pantograph (serial #56079). This comes with six authentic Deckel collets, which sizes include 1/8″, 4mm, 3/16″, 1/4″, 5/16″, and 3/8. I have included a few pictures with dimensions, but will gladly answer any other questions. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “andrewp81090″ and is located in this country: US. This item can be shipped to United States.

• Model: Deckel GK21 Pantograph Milling
• Brand: Deckel
• Function: Milling
• Machine Type: Pantograph

Machine Type: Vertical Machining Center CNC. Make: Deckel Maho, DMC, DMG. Model: DMC 64 V Linear. Voltage: 400v / 3PH – Comes with step up transformer 208v to 400v. Spindle Power: 22 hp. Spindle speed: 8,000 RPM. # ATC: 30 (16 Usable). Minimum Floor-space Required: Width(front of machine) 115″ x Length(side of machine) 180″ x Height 130. Dimensions: Main Unit: W 115″ x L 93″ x 125. Dimensions: Coolant Filtration Unit: W 48″ x L 80″ x H 60. Dimensions: Chip Conveyor Unit: W 48″ x L 132″ x H 60. Fanuc 180i CNC Control – Network, USB and Hard Drive Interfaces. TSC – Thru Spindle Coolant. Coolant Filtration System with Internal Wash Down System. Comes with Step Up Transformer 208v to 400v. Sub-Plate Included – VISES ARE NOT INCLUDED. All Control, Machine, Electrical Diagrams included. Power On: 43,200/hrs. Currently being used – Running Parts – Can be Inspected. VISES ARE NOT INCLUDED. We can help with locating a local rigger! This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “streetsidetools” and is located in this country: US. This item can be shipped to United States.

• Model: 64V Linear
• Spindle Horsepower: 22 hp
• Country/Region of Manufacture: Germany
• Machine Type: Machining Center
• Table Length: 20 in – 24.9 in
• Max Spindle Speed (RPM): 8000
• Model Year: 2004
• Power Source: Electric
• X-Axis Travel Bed: 25.2
• Y-Axis Travel Bed: 23.625
• Z-Axis Travel Bed: 19.6
• Spindle Taper: CAT 40
• Function: Drilling, Milling
• Brand: DMG MORI
• Table Width: 20 in – 24.9 in
• Control: CNC
• Voltage: 400V

Deckel KF12 Copy Mill. Good condition, Has collet wrenches for spindle and stylus holder. Dozen small styli included. 3 spindle nuts and 3 stylus nuts included. Spindle collets: one 1/4, two 3/8, one 1/2, one collet adapter. Stylus collets: two 1/8, two 1/4, two 5/16, two 3/8, two 1/2. Included is a reversing attachment (not shown), can be used to create a “left hand” shape from a “right hand” model. Advanced for the time! This is a KF12, NOT a KF1. KF12 has the power knee that saves a lot of hand cranking up and down and allow for faster setup and tool changes. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “pilotbutte123″ and is located in this country: US. This item can be shipped to United States.

• Brand: Deckel
• Function: Milling
• Control: Manual
• Machine Type: Milling Machine
• Voltage: 480 V
• Model: Deckel KF12

Machine Type: Vertical Machining Center CNC. Make: Deckel Maho, DMC, DMG. Model: DMC 64 V Linear. Voltage: 400v / 3PH – Comes with step up transformer 208v to 400v. Spindle Power: 22 hp. Spindle speed: 8,000 RPM. # ATC: 30 (16 Usable). Minimum Floor-space Required: Width(front of machine) 115″ x Length(side of machine) 180″ x Height 130. Dimensions: Main Unit: W 115″ x L 93″ x 125. Dimensions: Coolant Filtration Unit: W 48″ x L 80″ x H 60. Dimensions: Chip Conveyor Unit: W 48″ x L 132″ x H 60. Fanuc 180i CNC Control – Network, USB and Hard Drive Interfaces. TSC – Thru Spindle Coolant. Coolant Filtration System with Internal Wash Down System. Comes with Step Up Transformer 208v to 400v. Sub-Plate Included – VISES ARE NOT INCLUDED. All Control, Machine, Electrical Diagrams included. Power On: 43,200/hrs. Currently being used – Running Parts – Can be Inspected. VISES ARE NOT INCLUDED. We can help with locating a local rigger! This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “streetsidetools” and is located in this country: US. This item can be shipped to United States.

• Model: 64V Linear
• Spindle Horsepower: 22 hp
• Country/Region of Manufacture: Germany
• Machine Type: Machining Center
• Table Length: 20 in – 24.9 in
• Max Spindle Speed (RPM): 8000
• Model Year: 2004
• Power Source: Electric
• X-Axis Travel Bed: 25.2
• Y-Axis Travel Bed: 23.625
• Z-Axis Travel Bed: 19.6
• Spindle Taper: CAT 40
• Function: Drilling, Milling
• Brand: DMG MORI
• Table Width: 20 in – 24.9 in
• Control: CNC
• Voltage: 400V