Bright LED Daylight White Ring Quill Lamp. The magnet is strong. Working voltage: AC 85-240V. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “xytown00″ and is located in this country: US. This item can be shipped to United States.

• Custom Bundle: No
• Item Width: 96mm
• Operating Range: Less Than 5 m
• Voltage: 110-240v
• Bundle Description: No
• Item Length: 96mm
• Item Height: 18mm
• Power Source: Wall Plug-In
• Material: Metal
• Item Weight: 100-500 g
• Brand: Unbranded
• Energy Star: Not Compliant
• Type: Worklight
• Machine Type: Milling Machine
• Function: shadowless lamp
• Control: button

Milling Machine Parts R8 Spindle with Bearings Assembly 1 SET USA. High Quality R8 Spindle + Bearing Assembly For 3# 4# Milling Machine. This product is a high quality R8 spindle + bearing for 3#4# milling machine. After the spindle is replaced, it can change the surface or side of the milling workpiece caused by the tool wear caused by the long wear of the spindle and the bearing clearance. Smooth, rough and uneven! Name: Milling R8 spindle + bearing. Total length of the spindle: 545mm. Head outer diameter: 46mm. Spline outer diameter: 25mm. D:25mm D1:20mm B:6mm. Bearing position: 35mm and 30mm. Scope of application: Most milling machines (3#4# milling machine). 1X R8 spindle + bearing. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “businessforum” and is located in this country: US. This item can be shipped to United States.

• Shipping notice: Can not ship to Puerto Rico,Alaska/Hawaii
• Brand: Unbranded
• Machine Type: Milling Machine
• Name: Milling R8 spindle + bearing

Milling Machine Riser Block 4 for Bridgeport-Type Knee MIlls 4inch. Milling Machine Riser Block 4. For Bridgeport-Type Knee Mills. Includes 4 bolts and cross member (spider). The bolts (qty: 4) are hex head bolts 1/2 in diameter and can thread into the spider. The base diameter is 15 inch (380mm). The shoulder diameter is 12.48 (317mm). The inside diameter is 10 (255.9mm). The rectangular bolt pattern is 9 5/8″ x 6 3/4″. 2015-12-29 Application Note: Some customers with original Bridgeports installed the riser block without modification, however, a recent customer with 1960 Bridgeport Series 1 J-head reports that this riser block’s bolt pattern is correct, but the bore needs to be enlarged to accept the Bridgeport’s turret. In light of this information, please budget your time accordingly. We’ll keep this note updated as more information comes in. Please note: Actual paint color of the riser block MAY VARY from the photos. If You have any questions regarding this item, please let us know we’ll be happy to help. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “eisenmachineryinc” and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Germany, Japan, France, Australia.

• Brand: EISEN
• MPN: S2-RB-4\
• Country/Region of Manufacture: Taiwan

545mm Milling Machine R8 Spindle + Bearings Assembly. Name: Milling R8 spindle+bearings Length:545mm Suitable for most milling machines, Packing quantity: 1set(R8 spindle+bearings). After the spindle is replaced, the old machine, such as the new machine effect, changes due to the long-term wear of the spindle, the bearing clearance is large, and the tool jumps, resulting in the surface and side of the milling workpiece is not smooth, rough and uneven. Orders are processed from Monday-Friday; Not on the weekends & public holidays. We will work with you to get the case resolved in the fastest method. Hope for your understanding. Please contact with us at first for more details. Defective & Damaged Products. If product was received damaged or not as described, please send us some pictures or videos, so we could well understand your problem, then solve them for you ASAP. Besides, it’s much helpful for us to claim with UPS, remind our related department to pay much more attention to packaging later on. If an item is received damaged, customer service must be contacted within 7 days of receiving your item. Payments via eCheck do not clear immediately. Usually you will wait 5-7 days after checkout for it to clear. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “int_seller20″ and is located in this country: US. This item can be shipped to United States.

• MPN: 054316
• Brand: TECHTONGDA
• UPC: 682365834058

Hi guys, i got this mill from a basement in the dregs of NYC, and it wasnt easy. Its a diamond tool milling machine made in. Its a very complete machine with all the covers and i did not know it when i got it, but it actually works and the original. Motor runs smooth and quiet, it came from a wood guy and it sat in the corner of his shop for 20 years that he knew of. These were all horizontal mills but as you can see this one has a vertical attachment, made by porter cable which by itself. As you can see there are two damaged areas to the table, which can be repaired. Single phase 110 volt. I love this mill but i have a lot of projects so i, m offering it up, if theres no interest then it will be one of my winter projects. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “horseguy6969″ and is located in this country: US. This item can be shipped to United States.

• Function: Milling
• Machine Type: Milling Machine

A&T Universal Air Power Drawbar. Machinist changes tools manually 10-15 times per day at 3 minutes per tool change. By installing the Air Power Drawbar unit, machinists change tools within seconds and eliminate the need to climb for the drawbar and the use of ¾ wrench. With the use of A&T Air Power Drawbar unit, one can save approximately 12 hours per month. The unit can be installed within 25 minutes without any special drawbar needed. 19 mm socket for R-8 or 30 taper and 21 mm socket for 40 taper spindles. The unit is powered by shop air 90 P. I without electrical wiring and also no drilling or tapping is required for variable speed mill head. A uniquely designed air motor with some parts made from nickel, chrome tungsten alloy steel. Operators can change tools with control valve pushed button to engage or disengage the tools. Model #: ADB-300 V. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “jojo9000c” and is located in this country: US. This item can be shipped worldwide.

• Machine Type: Milling Machine
• Model: ANT-300V
• Country/Region of Manufacture: Taiwan

(Save a Minute) CNC Milling & Lathe Accessories. Save A Minute is a new brand of lathe and milling accessories to organize and save you time making parts. Both line more profitable. ” Save A Minute” “SM”. This is a custom made tool hold that bolts to the outside of your mill. This holder made of. 125 steel, laser cut and powder coated red. This accessory will help you keep your tools organized and at your finger tips. Holds cordless impact drill that has a belt clip, miscellaneous sockets, and a place to clip a tape measure. Comes with all hardware to install it (drilling is required). Keep your impact drill close by for quick use. Holds 4 Parallel retention tools and 4 Allen T handle tools. Having 4 parallel retention holders laying around is a mess. This keeps them right where you can gab and store them. Comes with all the hardware to install it (drilling is required). This is a custom made tool hold that bolts to the The out of you mill, to hold you dial indicators. 25 steel, laser cut and powder coated red. This accessory will help you keep your dial indicators set in position, like the way you last used them and in a safe place. Holds two dial indicators tools and comes with all the hardware to install it (drilling is required). Holds three tools and a place to clip a tape measure. When you are looking for those one or two tools you need to keep the work flowing all day long. This is a custom made tool hold that bolts to the T-slots inside the mill. Comes with a drop in T-nut 1/2-13 x 5/8 base, bolt and washer to install it. It’s right in the mill when you open the doors. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “kevinsmi” and is located in this country: US. This item can be shipped to United States.

• Brand: Haas
• Function: Milling
• Control: CNC
• Machine Type: Vertical Milling Machine
• Model: DIH-200

Milling Machine Accessory – Right Angle Attachment for NT30 spindle taper. Milling Machine Right Angle Attachment. Fits Bridgeport-style milling machines with a 3 3/8 (8586mm) quill diameter and NT30 spindle taper. Specification Measurement : Metric System Not English units. Converts a vertical mill into a horizontal mill. Note: Maximum allowed speed with right angle attachment is 2000 rpm. Spindle runout is ± 20 micron (0.00078). WHAT YOU’LL RECEIVE. Bolt to act as mini drawbar for stub arbor. If You have any questions regarding this item, please let us know we’ll be happy to help. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “eisenmachineryinc” and is located in this country: US. This item can be shipped worldwide.

• Brand: GEM POWER
• MPN: G102-86mm-NT30
• Model: G102-NT30
• Country/Region of Manufacture: Taiwan

220 3 phase machine good bearings no backlash, with VFD YOU CANUSE SINGLE PHASE VOLTAGE AND MACHINE SPEED CAN BE USED LIKE A CAIR SPEED MACHINE, LOW HOURS IN VERY GOOD CONDITION THIS IS ABOUT 30 PERCENT OF THE PRICE OF A NEW MACHINE. Take a look at the flaking on the knee they realy took good care of this mill one owner machine came out of a home shop. PLEASE MESSAGE I CAN SEND A LIST OF NEW PARTS TABLE SCREWS INSERTS BEARINGS. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “cncpa53″ and is located in this country: US. This item can be shipped to United States.

• Model: Bridgeport 9×42
• Spindle Horsepower: 9 hp
• Machine Type: Mill Drill
• Function: Drilling
• Brand: msc