Used in good condition, fully functional. The item “TREE 3 Phase 220/440 Volt Knee Mill” is in sale since Wednesday, June 9, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “maint_9179″ and is located in Lorain, Ohio. This item can’t be shipped, the buyer must pick up the item.

• Spindle Horsepower: 1.5
• Brand: TREE
• Function: Milling
• Current Type: AC
• Control: Manual
• Machine Type: Milling Machine
• Power Source: Electric
• Table Length: 42
• Voltage: 440 V
• Model: 3 Phase 220/440
• AC Phase: Three Phase
• Table Width: 11

Mori Seiki MV-40 M CNC Mill. Interrupting Capacity of Circuit Breaker: ————————– 25 KA. Amperage of Largest Load: —————————————— 38 A. Coolant Tank 150 gal. The item “Mori Seiki MV-40 M” is in sale since Wednesday, February 19, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “interest2009″ and is located in North Vernon, Indiana. This item can’t be shipped, the buyer must pick up the item.

• Model: MV-40 M
• Spindle Horsepower: 25
• Country/Region of Manufacture: Japan
• Custom Bundle: No
• Machine Type: Vertical Milling Machine
• Table Length: 35 in
• Max Spindle Speed (RPM): 8000
• Model Year: 1996
• Power Source: Electric
• X-Axis Travel Bed: 22 in
• Y-Axis Travel Bed: 16 in
• Z-Axis Travel Bed: 18 in
• Spindle Taper: BT 40
• Function: Drilling
• Brand: Mori Seiki
• Table Width: 17.7 in
• Control: CNC
• Voltage: 220 V

Great American Equipment Company. HAAS UMC750 Full 5-Axis CNC Universal Vertical Machining Center. Model: UMC750, New 6/2014, S/N 1113260. Haas 5-Axis CNC Control, Full 5-Axis Contouring 19.7 Trunnion. Mounted Rotary Table, Remote Handwheel, RS-232 Port, Ethernet Port. Haas Intuitive Probing, 7,500 RPM Spindle, Rigid Tapping. Rotation and Scaling, Advanced Tool Management, Remote Jog Handwheel. Helical-Cut, 30 Station Tool Changer, Cat-40 Spindle Taper. Chip Conveyor and Coolant System. Table Working Surface (Round)……………… A-Axis Trunnion Tilt Range………………… +120 to -35 Degrees. C-Axis Table Rotation Positioning………….. Table Surface To Spindle Nose……………… 96″ x 160″ x 110H. CONDITION: From a Large Aerospace Facility. Machine Appears to be in Excellent Condition! We can load for free any weight item. We will help with trucking by using our nationwide network to get you the very best trucking rate. There will be reasonable charges for export crating and/or containerization, based on the time and materials required. Warehouse Hours are M-F 7:30am – 4:30pm. Questions and Trucking Quotes. We are here to answer your questions and to help with a trucking quote. The item “Haas UMC750 Universal CNC Vertical Mill 5 Axis CNC Machining Center, 2014″ is in sale since Tuesday, January 19, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “great_american_equipment_company” and is located in Cincinnati, Ohio. This item can’t be shipped, the buyer must pick up the item.

• Model: UMC750
• Spindle Horsepower: 30 hp
• Machine Type: Machining Center
• Table Length: 19.7″
• Max Spindle Speed (RPM): 7500
• Model Year: 2014
• X-Axis Travel Bed: 30
• Y-Axis Travel Bed: 20
• Z-Axis Travel Bed: 20
• Spindle Taper: Cat-40
• Function: Milling
• Brand: Haas
• Table Width: 19.7″
• Control: CNC

For sale Emco Concept Turn 55 PC controlled 2-axis CNC tabletop turning machine , unit is used , clean and come with computer with software and extral item show in the photo. The item “Emco Concept Turn 55 PC controlled 2-axis CNC tabletop turning machine” is in sale since Tuesday, September 7, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “alvin1462″ and is located in Singapore, default. This item can be shipped worldwide.

• Model: Concept Turn 55
• Modified Item: No
• Country/Region of Manufacture: Austria
• Machine Type: Horizontal Milling Machine
• Model Year: 2006
• Power Source: Electric
• Function: Milling
• Brand: Emco
• Control: CNC

SOUTHWESTERN INDUSTRIES TRAK TRM 2AXIS CNC BED MILL. (1) Used Southwestern Ind Trak TRM 2 Axis Vertical Bed Mill. Newer low hours on motor. Auto Z quill feed. Table size: 50″ x 10″. Travel – X axis (longitudinal): 31. Y axis (cross): 17 3/4. Z axis: 23 5/8. Table load: 1320 lbs. Spindle motor: 3 HP. Spindle speeds: 70 – 4200 RPM. Spindle taper: NMTB # 40. Dimensions: 72″W x 66″D c 95H. The item “SOUTHWESTERN INDUSTRIES TRAK TRM 2AXIS CNC BED MILL With Fixture Accessories” is in sale since Saturday, September 4, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “gros5961″ and is located in Clearwater, Florida. This item can’t be shipped, the buyer must pick up the item.

• Function: Milling
• Control: CNC
• Model: SOUTHWESTERN INDUSTRIES TRAK TRM

UNIT WAS ORIGINALLY A CENTRIC CNC MACHINE. STILL HAVE ALL OLD MOTORS AND CONTROLLER. MACHINE DOES OPERATE WELL. WAS IN THE MIDDLE OF CONVERSION TO LOGICTROL STEPPER MOTOTRS AND CONTROLLER BUT I HAVE LOST INTEREST AND TIME. I HAVE OVER 5K INVESTED. MY LOSS IS YOUR GAIN. The item “BRIDGEPORT VERTICAL MILLING MACHINE” is in sale since Monday, March 15, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “keithbuffett” and is located in Northport, Alabama. This item can be shipped to United States, Canada.

• Function: Milling
• Control: CNC
• Voltage: 220 V
• Machine Type: Vertical Milling Machine
• Power Source: Electric
• Spindle Horsepower: 2 hp
• Brand: Bridgeport

1997 Chevalier 2 Axis CNC Vertical Mill Milling Machine 10 X 50. 10 X 50 table in good condition. 2 Axis Southwestern industries controls. New Y axis motor. Acu-rite glass scales including z axis. North America Phase converter. Quick change cat 40 tool holder. This is a nice machine. Everything above is included. Southwestern Industries still supports these controls. They were extremely helpful in diagnosing the problem with the Y axis. The manual for the controls is easy to follow. Easy to program with the features included in the software such as pocketing framing drill points and more. Also accepts programs from floppy disk or straight from a computer via 9 pin cable. The item “1997 Chevalier 2 Axis CNC Mill Milling Machine 10X50 Southwestern Industries” is in sale since Tuesday, June 2, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “southfergy” and is located in Baytown, Texas. This item can’t be shipped, the buyer must pick up the item.

• Brand: Chevalier
• Model Year: 1997
• Machine Type: Vertical Milling Machine
• Control: CNC

Custom Built Parker 404XR CNC Machine. GeckoDrive G201 Stepper Controller. X Travel = 400mm (415mm max). Y Travel = 300mm (310mm max). Z Travel = 100mm (120mm max). 16mm dia Precision Ground Ballscrew s. Proximity Sensors (Limit Switches). Includes all cables and is ready to Plug-N-Play. I have run a test program on this machine and. Posted a video to YouTube. THIS MACHINE HAS HIGH VOLTAGE COMPONENTS. THE CONTROLLER CASE WAS BUILT WITH ALUMINUM. FRAMING AND IS NOT’UL APPROVED’ AND IT IS. POSSIBLE THAT IT MAY NOT BE GROUNDED PROPERLY. IF YOU DO NOT HAVE THE EXPERIENCE TO WORK. WITH HIGH VOLTAGE ELECTRICAL EQUIPMENT. FROM THE IMPROPER USE OF THIS EQUIPMENT. THIS INCLUDES PROPERTY DAMAGE, BODILY INJURY OR LOSS OF LIFE. This is a custom Parker 404XR CNC machine that was built a. Few years ago but never put into service. It only has a few hours. Of run time for testing but it has never had a spindle attached to it. It was built using mostly new parts the three longer 404XR actuators. Were lightly used but are in excellent working condition. Complete turn-key system that includes computer with Mach3 installed. And is ready to plug-n-play. See YouTube video for demonstration. It is a 3-axis machine with with dual Parker 404XR actuators on. The’Y’ axis the’Y’ and’A’ axis are slaved together and the controller. Uses a 4-axis Mach3 breakout Board. The’Y’ and’X’ axis actuators. Have new Parker nema34 stepper motors and the’Z’ axis has a new. Pacific Scientific nema23 stepper motor. All of the Parker 404XR. Actuators have 16mm diameter precision ground ballscrews, and. All actuators also have proximity sensor (limit switches) that are. Wired to the breakout board to prevent overtravel. Uses a 4-axis SoundLogic breakout board and GeckoDrive G201. Stepper drivers with an Antek 39v 500watt unregulated power supply. The front of the controller has a’Power On’ and’Stop’ button that. Turn the machine on/off. The’Emergency Stop’ button on the controller. Will send a signal to the Mach3 breakout board to stop a program that. Is running and will stop the machine from moving but will not cut power. There is a digital voltage meter and amp meter the measures the output. Of the Antek power supply. The four’On / Off’ switches are used to disable. The G201 drives and cut power to the stepper motor so that you can. Manually adjust the axes if needed. The’Y&A Axis Lock / Unlock’ switch. Is used in conjunction with the’On/Off’ switches and when the Y and A. Axis are’locked’ you only need to turn off one of the switches (Y or A) and. It will disable both motors on the Y/A axis so that the Y axis can be. If you only need to adjust one motor at a time you. Can’Unlock’ the Y and A axis and that will give you independent control. Of the Y and A motors using the’On/Off’ switches. Please note that there. Is a timing belt at the rear of the machine that is used to keep the Y and A. Axis synchronized, so to adjust the motors independently you would need. To loosen one of the pulleys. There are also digital temp gauges below. Each’On/Off’ switch that measure the temperature of the GeckoDrive. G201 stepper drives (the temp probe is attached to the G201 heatsinks). The machine has never had a spindle attached to it but it does have. A’Spindle Out’ 120v plug at the rear of the controller that is software. Controlled using the M3 & M5 command in Mach3 (M3 = On , M5 = off). There is also an extension cord that has already been run from the. Back of the controller to the Z-axis actuator you can see the orange. 120v plug at the top of the z-axis, so all you have to do is mount a. 120v spindle to the z-axis and plug it into the extension cord. There are two 120v power inputs on the back of the controller, the. Main – In’ is what supplies power to the machine and the’Aux- In. Only supplies power to the’Spindle – Out’ the’spindle out’ socket. Is controlled using a 25amp solid-state relay controlled with Mach3. The computer that comes with this machine is a newly refurbished. I have done to it is install a licensed copy of Mach3 software on it. The machine and controller were built using 2040 (2″ x 4″) aluminum. Is something that I bought separately and I believe it is constructed. Using Bosch/Rexroth 30mm square aluminum framing. Has locking casters on it so that it can be moved around easily. Computer stand = 25″w x 25″d x 30-1/2h. Controller = 28″w x 24″d x 4h. CNC Machine (Main Frame) = 30″w x 22″d x 16h. X Axis = 400mm rated travel (415mm max). Y Axis = 300mm rated travel (310mm max). Z Axis = 100mm rated travel (120mm max). X Axis = 450ipm. Y Axis = 400ipm. Z Axis = 150ipm. Parker 404400XRMS-D4 Actuator (20mm pitch ballscrew). Parker OEM 83-93-MO Nema34 Dual-Shaft Stepper. (x2) Parker 404300XRMS-D4 Actuator (20mm pitch ballscrew). (x2) Parker OEM 83-93-MO Nema34 Dual-Shaft Stepper. Parker 404100XRMP-D2 Actuator (5mm pitch ballscrew). Pac-Sci E22NCHT Nema23 Dual-Shaft Stepper. (x4) GeckoDrive G201 7-amp Stepper drives. SoundLogic 4-Axis Breakout Board. Antek 39v 500Watt Power Supply. (x4) 120v Cooling Fans (x2 Intake , x2 Exhaust). HP Compaq Desktop Tower. Intel Core 2 Duo 2.80ghz. With Licensed copy of Mach3. Dell 17 LCD Monitor. Parker 404XR Website Link. Because this item is too heavy. This is available for local pick-up. The item “Custom Parker 404XR CNC Precision Linear Actuator with Ballscrew Mach3 GeckoDrive” is in sale since Tuesday, October 6, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “xyz_axis_cnc_2011″ and is located in Pueblo, Colorado. This item can’t be shipped, the buyer must pick up the item.

• Machine Type: Custom Parker 404XR CNC
• X-Axis Travel Bed: 400mm (16in)
• Y-Axis Travel Bed: 300mm (12in)
• Z-Axis Travel Bed: 100mm (4in)
• Brand: Parker GeckoDrive Pac-Sci
• Control: CNC
• Voltage: 120 V

BARKER BENCH TOP HORIZONTAL MILLING MACHINE, RUNS GREAT, MISSING THE LEAD SCREW. 115/230 volts, single phase, 1/3 hp. The item “BARKER BENCH TOP MILLING MACHINE” is in sale since Thursday, September 30, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “3603christine” and is located in Thomaston, Connecticut. This item can’t be shipped, the buyer must pick up the item.

• Brand: BARKER
• Function: Milling
• Control: Manual
• Machine Type: Horizontal Milling Machine

Quality & Integrity Since 1925. Horizontal Mill w/ Dividing Head 3 Jaw Chuck. Model H Milling Machine. This Machine came from our flow machine shop and was used very lighlty. Comes with dividing head and 3 jaw chuck. Dividing Head w/3Jaw Chuck. Table working surface 9″ x 46″. Spindle speeds (16) 35 to 1400 RPM. Taper in spindle #40 MT. 5 to 20 IPM. Main motor 5 HP 220,440V. Approx weight 3800 lb. Approx dimensions 5′L x 5′W x 5′H. NOTE: Machine is available without dividing head, 5475.00. And we can answer any questions you have about this item. The items are as you see it in the picture. Local pick-up is available. Lynde-Ordway is a California corporation dedicated to providing quality products at very competitive prices. We have been leading the way in our areas of expertise since 1925 thanks to “You” our loyal customers. We strive to offer the best total value: Quality Products, Very Competitive Prices, Experienced Account Managers and Factory Trained Technicians. Lynde-Ordway can also custom modify any machine to meet the needs of even the most complex application. Lynde-Ordway only ships to the 48 Contiguous United States. For a general message. Please check the item page for specific return policies. Huntington Beach, CA 92649. The item “Horizontal Mill with Dividing Head & 3 Jaw Chuck Kearney & Trecker Model H Milling” is in sale since Tuesday, September 29, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “lynde-ordway” and is located in Huntington Beach, California. This item can’t be shipped, the buyer must pick up the item.

• Model: H
• Machine Type: Horizontal Milling Machine
• Table Length: 46″
• Model Year: Pre-1940
• Function: Milling
• Brand: KEARNEY & TRECKER
• Table Width: 9″
• Voltage: 220 V/440V