Very nice “dial” type FP-1 horizontal milling machine with a standard table, horizontal arbor, arbor support and overarm in excellent condition. What is pictured is what is for sale, this machine does not include a vertical head. The machine has satin chrome dials that are graduated in inches. The machine is wired for 230 volt three phase and includes the original 50Hz 3-phase motor. The moror sits on a cast bracket and can easily be replaced with a 1Ph motor. I bought this mill 20+ years ago, disassembled it and took it down to the castings. A job I never finished and after 20 years don’t think I ever will. Major reassembly is done, a handful of chores like replacing the gear change covers and hooking up motor wiring is all it needs to make chips. Deckel manual included (a copy) GERNERAL SPECIFICATIONS MODEL NUMBER: FP1 DRIVE MOTOR Capacity: 1.1/1.4 kw Speed (pole-changing switch): 700/1400 rpm MAIN TRANSMISSION All-geared Number of stages: 6 HORIZONTAL CUTTER SPINDLE Number of spindle speeds: 12 Speed range (geometrical progression): 60-1200 rpm Taper hole in spindle nose: Morse No. 4 Maximum collet capacity: 1″ TABLE SCREWS 1 revolution of graduated drum (table horizontal adjustment) corresponds to: 0.125″ 1 revolution of graduated drum (table vertical adjustment) corresponds to: 0.100″ 1 division of the graduated drums corresponds to: 0.001″ HEADSTOCK Range of horizontal adjustment: 5-7/8″ WORKTABLE WITH VERTICAL CLAMPING SURFACE Work clamping area: 7-11/16″x 21-5/8″ Longitudinal travel: 12″ Vertical travel: 13-3/8″ FEEDBOX Number of feed rates (pole-changing switch): 16 Feed per minute (geometrical progression): 3/8″ to 19″ Overall Dimensions: 49″x 44-1/2″x 53-1/2″ tall Approximate Weight: 1320 lbs. I do not have a forklift but if you have a truck with a liftgate it is on a pallet and I have a pallet dolly. The item “DECKEL FP1 Horizontal Milling Machine” is in sale since Tuesday, August 31, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “reticulum.online” and is located in Port Townsend, Washington. This item can be shipped to United States.

• Spindle Horsepower: 1 hp
• Brand: Deckel
• Function: Milling
• Control: Manual
• Machine Type: Horizontal Milling Machine
• Voltage: 220 V

Bridgeport J Head 1HP Milling Machine. Fully disassembled, cleaned, and restored. New parts (all from H+W). Split nuts for both lead screws. “Top Half Rebuild kit, ” new belts and all new bearings in the pully housing. Top gear case packed with grease instead of oil. New spindle oil strainer. Felt wipers for all ways. Filters for one shot lube system. All new oil lines. New power downfeed trip lever. It has the oldest geared Bridgeport powerfeed, but no motor to drive it. It has a Bijur one shot lube system, that I also took apart, cle. Aned, and filled with fresh oil. The power downfeed works great, very smooth. I have videos of everything in operation that I can send. Great old machine, missing a little paint but good working condition. Gibs are shimmed, and when the gibs are fully tight, wear in the ways limits the table and saddle travel. It has a travel of 19″ longitudinal, and 8″ cross travel. One might be able to adjust the gibs, or remove the shims. The machine still holds great tolerances within its reduced travel, in my limited experience. Feel free to reach out with any questions, or to set up a time to look at the machine in person. My business has a forklift and I can help load. The item “Bridgeport J Head Milling Machine, 1HP, 9-42 Table, Fully Cleaned and Restored” is in sale since Sunday, August 15, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “nicholas.meehan” and is located in Brooklyn, New York. This item can’t be shipped, the buyer must pick up the item.

• Brand: Bridgeport
• Spindle Horsepower: 1 hp
• Function: Drilling
• Control: Manual
• Machine Type: Milling Machine
• Voltage: 220 V
• Model: Bridgeport J

Haas VF-3 APC VMC, 2011 – 10k RPM, 40 Tool SMTC, Haas Pallet Changer, 2 Speed Ge. We are pleased to offer the following for your consideration. Travels: 40″ x 20″ x 25. RPM: 10,000.00. 40 Station Sidemount Tool changer. Through Spindle Coolant 300PSI. 2 speed gear box. 4th Axis Drive and wire. Coordinate Rotation and Scaling. Revelation Machinery encourages first-hand inspection of all used machinery. Please verify all of the specs listed for this machine. Listing and template services provided by inkFrog. The item “Haas VF-3 APC VMC, 2011 10k RPM, 40 Tool SMTC, Haas Pallet Changer, 2 Speed Ge” is in sale since Wednesday, August 4, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “revelationmachinery” and is located in Los Angeles, California. This item can be shipped to United States.

• Brand: Haas

Mill was part of a large manufacturing operation that is being parted out. Has not been fully tested since removal from shop. It will need a computer and the proper software to run. Currently not in runnable shape without it. You will need a fork lift to get the pallet/mill off the extruded caster frame. Please reach out with any questions. The item “1996 Benchman VMC 4000 CNC Milling Machine Needs Computer Controller/Software” is in sale since Tuesday, August 17, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “thepanelpirate” and is located in Holland, Michigan. This item can’t be shipped, the buyer must pick up the item.

• Model: VMC 4000
• Country/Region of Manufacture: United States
• Machine Type: Milling Machine
• Max Spindle Speed (RPM): 10000
• Model Year: 1996
• Power Source: Electric
• MPN: VMC 4000
• UPC: Does not apply
• Function: Milling
• Brand: Benchman
• Control: CNC
• Voltage: 110 V

Hurco Hawk 30 CNC Milling Machine. Y TABLE SIZE ————————– 52 in X 11 in. Y-AXIS TRAVEL ————————- 18 in. Z-AXIS ——————————– 20 in. X-AXIS ——————————– 35 in. HURCO MODEL ULTIMAX SSM DIGITAL CONTROL. Please see the video link in the above description. Machine is in excellent condition & can be inspected under power at our warehouse in Independence MO. The item “Hurco Hawk 30 CNC Milling Machine 3 Axis Ultimax CNC Control” is in sale since Sunday, May 16, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “hi-techmachineryinc” and is located in Independence, Missouri. This item can’t be shipped, the buyer must pick up the item.

• Brand: Hurco
• Control: CNC
• Machine Type: Milling Machine
• Model: Hawk 30

US Burke Millrite Milling Machine. Is in good condition, there’s not one oops mark in the table! Comes with collets, and end mills. We will load for free. The item “US Burke Millrite Milling Machine” is in sale since Thursday, August 19, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “gearsnthings” and is located in Bethlehem, Connecticut. This item can’t be shipped, the buyer must pick up the item.

• Machine Type: Milling Machine

DMG Mori DMU 100 Monoblock VMC, 2008 – Coolant Thru Spindle, Blum Laser, Probing. We are pleased to offer the following for your consideration. Table Size: 59.1″ X 31″. X – Axis Travel: 49.2. Y – Axis Travel: 28. Z – Axis Travel: 28. Tool Changer Type: 32 Mag Pockets. Spindle Motor (hp): 20.1 Hp/13.4 Hp. Spindle Speed: 18,000 Rpm. Table Indexing: 0.001 Deg. Table Weight Capacity: 1,760 Lbs. Spindle Head: -120° /+30° Swivel Range. Spindle Head Nutating: 0-90 Deg. Itnc 530 / Millplus It Control. Nc Rotary Table Integrated Into Rigid Table. 40 Bar/23 I/min I 580 Psi/6 Gallon/min. Tank 600 I / 160 Gallon. Chip Rinsing In Cabin Door. Coolant Through Spindle Centre. Motor Spindle SK 40. Revelation Machinery encourages first-hand inspection of all used machinery. Please verify all of the specs listed for this machine. Listing and template services provided by inkFrog. The item “DMG Mori DMU 100 Monoblock VMC, 2008 Coolant Thru Spindle, Blum Laser, Probing” is in sale since Wednesday, March 4, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “revelationmachinery” and is located in Castle Rock, Minnesota. This item can be shipped to United States.

• Brand: DMG MORI
• MPN: Does not apply

Bridgeport Milling Machine Model T Cherrying Head Attachment 4 Tool Die Mold Making. Condition is tested working used. Comes with 3 collets 1/2, 3/8, and 1/4. First picture is a screen grab from an old catalog scan, if you would like a copy of it please print one. Cherrying head was designed and engineered to meet the need for an. Economical method of eliminating the time consuming hand work in die sinking. Small die work cari be done effectively with the. Head mounted on a Bridgeport Turret Miller. This head has an oscillating quill which can move an ordinary die sinking. Through a circular path either convex or concave. Perform both rough and f. Radis is adjustable from Oto. A quill lock is supplied to lock the quill. A fixed position when conventional milling work is called for. This head can be operated at right angles to both cross and longitudinal travel of the table. The item “Bridgeport Milling Machine Model T Cherrying Head Attachment 4 Tool Die Mold Mak” is in sale since Wednesday, June 17, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “zwmcquig” and is located in Yorktown, Virginia. This item can’t be shipped, the buyer must pick up the item.

• Model: Cherrying Head Attachment
• Country/Region of Manufacture: United States
• Spindle Horsepower: Less than 1 hp
• Machine Type: Turret Mill
• California Prop 65 Warning: Yes
• Power Source: Electric
• MPN: T
• Spindle Taper: B&S 7
• Function: Milling
• Brand: Bridgeport
• Control: Manual
• Voltage: 220 V

Fixture Plate/pallet Welding fixture plate made in sheffield. Ideal for clamping small, flat or awkward Precision CNC machined. Drilled and tapped M12 on 35mm centres, custom hole patterns or threads no problem. Designed to be used with standard hold down clamps. Table side has a 16mm slot machined for fast alignment with milling table T slots. Two counter bored holes for m12 or 1/2UNC hold down T bolts. Reamed 12mm dowel pin locations 0n alternate lines- pins can be line up for fast easy repeatable clamping Top, bottom & side surfaces machined 4 qty 12mm dowel pins included Size- 500mm x 400mm (+/-2mm) x 25mm +/- 0.5mm 6082 aluminium Other Sizes aviable- 100mm x 175mm & 250 x 150mm. The item “Fixture pallet- Welding Fixture plate, milling machine Bridgeport, 500x400mm” is in sale since Friday, November 22, 2019. This item is in the category “Business, Office & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “cyclops_designs” and is located in sheffield, South Yorkshire. This item can be shipped to North, South, or Latin America, all countries in Europe, Australia, Bahrain, Japan, New Zealand, China, Israel, Hong Kong, Indonesia, Malaysia, Singapore, South Korea, Taiwan, Thailand, Bangladesh, Brunei darussalam, Egypt, Jordan, Cambodia, Sri lanka, Macao, Maldives, Oman, Pakistan, Reunion, Saudi arabia, South africa, United arab emirates, Kuwait, Qatar, Viet nam, Philippines.

• MPN: Does Not Apply
• Brand: Cyclops Designs