Cnc Z Axis Tool Sensor. Cnc Z Axis Tool Sensor Automatic Tool Setting Gauge fully automatic knife block for mach3 cnc machine touch sensor. This product has only one form of normally close Do not support the normally open form Dustproof, waterproof and durable No built-in amplification is required, and there is no deviation caused by the fluctuation of the power supply voltage due to the position temperature of the tool setting instrument. High precision and strong anti-interference. Electric shock life: 3 million times. Protection structure: IP67 waterproof. Contact force: 1.5N. Housing material: grinding 4S. Colour: Silver + gold. Protection tube length: 1m. 1CNC tool pre setter. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “dembergear1″ and is located in this country: CN. This item can be shipped worldwide.

• Color: With mouth
• Model: Z Axis Tool Sensor
• Modified Item: No
• Spindle Horsepower: Cnc Z Axis Tool Sensor
• Country/Region of Manufacture: China
• Custom Bundle: No
• Machine Type: Cnc Z Axis Tool Sensor
• Table Length: Cnc Z Axis Tool Sensor
• Max Spindle Speed (RPM): Cnc Z Axis Tool Sensor
• Model Year: 2020
• Power Source: Electric
• X-Axis Travel Bed: Cnc Z Axis Tool Sensor
• Y-Axis Travel Bed: Cnc Z Axis Tool Sensor
• Z-Axis Travel Bed: Cnc Z Axis Tool Sensor
• MPN: 1920097367
• Spindle Taper: Cnc Z Axis Tool Sensor
• Usage: Home DIY
• Function: Cnc Z Axis Tool Sensor
• Is_customized: Yes
• Material: Stainless steel
• Origin: CN(Origin)
• Type: Hand Tool Parts
• Brand: Unbranded
• Table Width: Cnc Z Axis Tool Sensor
• Control: Automatic, CNC
• Voltage: 220 V

Tested at 230 V but will run on 480 as well as 208. Bridgeport mill main drive motor variable speed 2-J head. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “jcm122286″ and is located in this country: US. This item can be shipped to United States.

• Machine Type: Milling Machine

Haas TM1P (2016) Vertical Machining Center Fully Loaded. Original owner with only 111 hours and has collected more dust than cutting chips. Fully loaded including the following. 10 station tool changer carousel. Wash down spray gun. Pre-wired for 4th access. This machine is in great working condition. It has been mostly used for Delrin plastic and some aluminum. Runs on 240 single phase. Or 240 three phase. It does not come with vice or tooling. We can load this machine into a buyers truck or trailer. The machine is currently under power now for inspection, but will be disconnected on December 8, 2021. The item “HAAS TM1P (2016) Vertical Machining Center Fully Loaded” is in sale since Friday, December 3, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “ilovewienerdogs2017″ and is located in Cresco, Pennsylvania. This item can’t be shipped, the buyer must pick up the item.

• Machine Type: Vertical Milling Machine
• Model Year: 2016
• Brand: Haas

Bridgeport J Head 1HP Milling Machine. Fully disassembled, cleaned, and restored. New parts (all from H+W). Split nuts for both lead screws. “Top Half Rebuild kit, ” new belts and all new bearings in the pully housing. Top gear case packed with grease instead of oil. New spindle oil strainer. Felt wipers for all ways. Filters for one shot lube system. All new oil lines. New power downfeed trip lever. It has the oldest geared Bridgeport powerfeed, but no motor to drive it. It has a Bijur one shot lube system, that I also took apart, cle. Aned, and filled with fresh oil. The power downfeed works great, very smooth. I have videos of everything in operation that I can send. Great old machine, missing a little paint but good working condition. Gibs are shimmed, and when the gibs are fully tight, wear in the ways limits the table and saddle travel. It has a travel of 19″ longitudinal, and 8″ cross travel. One might be able to adjust the gibs, or remove the shims. The machine still holds great tolerances within its reduced travel, in my limited experience. Feel free to reach out with any questions, or to set up a time to look at the machine in person. My business has a forklift and I can help load. The item “Bridgeport J Head Milling Machine, 1HP, 9-42 Table, Fully Cleaned and Restored” is in sale since Sunday, August 15, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “nicholas.meehan” and is located in Brooklyn, New York. This item can’t be shipped, the buyer must pick up the item.

• Brand: Bridgeport
• Spindle Horsepower: 1 hp
• Function: Drilling
• Control: Manual
• Machine Type: Milling Machine
• Voltage: 220 V
• Model: Bridgeport J

DAN’S MACHINE TOOL, INC. A BRIDGEPORT STEP PULLEY MILLING HEAD. NEW BELTS, BUSHINGS KEYS, AND BEARINGS. THIS HEAD IS IN PERFECT CONDITION. The item “Bridgeport Step Pulley Milling Machine Head FULLY REBUILT” is in sale since Wednesday, October 23, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “qjen1″ and is located in Anaheim, California. This item can’t be shipped, the buyer must pick up the item.

• Spindle Horsepower: 1 hp
• Country/Region of Manufacture: United States
• Machine Type: Milling Machine
• Power Source: Electric
• Spindle Taper: R-8
• Function: Milling
• Brand: Bridgeport
• Control: Step Pulley
• Voltage: 220 V

1-1/2 Precision Vertical Jig Borer. Very nice Jig Borer in Excellent working condition. Very smooth through the complete range of travel in all axis. Everything is in proper silky smooth working order. Needs nothing and it is ready to go to work and make chips. Beautiful flaking on all machined surfaces including the table and ways. This machine is Mint and it is very accurate! Don’t be fooled by the low price. The machine is mint! I have priced it to sell quickly! The 1-1/2 features close tolerance ways and slides. Variable speed spindle 120 to 2400 RPM. Vee and flat ways, no gibs, longer life. No overhang of table or slide. Two Spindle feeds 0.001 or 0.003 inches per revolution. Single lever front and back table clamps, non influencing. More accessible cross clamps, all non-influencing. Protected chrome plated dials and reference scales. Micro-setting of Vernier dials. 1-3/8 diameter Nitralloy lead screws. 220/440 volt 60 cycle 3 phase power wired 220 Volt. 10 x 16 Table. Table Travel Longitudinal 14 Inches. Table Travel Crosswise 9 Inches. Table Top to spindle end 3 to 16 inches. Vertical adjustment of quill housing 9 inches. Spindle quill travel 3-7/8 inches. The item “MOORE No. 1-1/2 Precision Vertical Jig Borer Mill Milling Machine Fully Tooled” is in sale since Saturday, November 14, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “ferrari2c” and is located in Locust Valley, New York. This item can’t be shipped, the buyer must pick up the item.

• Machine Type: Jig borer
• Manufacturer Part Number: Does Not Apply
• Function: Drilling
• Brand: Moore

Turn your ideas into a reality with the Sienci Mill One V2. The Mill One V2 and its software works on any computer and connects using standard USB. The total machine volume is about 17 x 17 x 11 (430mm x 430mm x 300mm) and has a respectable resolution of ±0.1mm. Standard Features: Laser cut, aluminum gantry plates for high rigidity Standard profile, extruded aluminum rails Delrin V wheels with variable eccentric nuts T82, 2mm pitch, 8mm diameter ACME lead screw for high torque and fastmovement Solid coupler from motor to leadscrew Specialized high torque NEMA 17 stepper motors CNC routed MDF frame Mount for the included router 24V, 110 Watt power supply Arduino board loaded with GRBL firmware Pololu A4988 stepper motor drivers on a CNC Arduino Shield. Router: runs at 20,000 30,000RPM at 1-½HP this router is equivalent to the Makita Router. Collet Chuck of 6mmm All the extra bits to use the router as a standalone router. Cutting volume: 10.15 x 7.25 x 3 (258mm x 185mm x 76mm). Suitable for: wood, plastic, circuit boards, foam, and soft metals. This CNC Machine is able to mill soft metals such as aluminum and copper. It is a good workhorse, but solid and compact. The milling bits are not included. This is a full kit of this machine that you will need to assemble yourself. The item “CNC Machine Desktop CNC Mill, super elegant machine, fully enclosed work area” is in sale since Tuesday, September 8, 2020. This item is in the category “Business, Office & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “kudzaim” and is located in Coventry. This item can be shipped to United Kingdom, Antigua and barbuda, Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, United States, Bahrain, Canada, Brazil, Japan, New Zealand, China, Israel, Hong Kong, Norway, Indonesia, Malaysia, Mexico, Singapore, South Korea, Switzerland, Taiwan, Thailand, Bangladesh, Belize, Bermuda, Bolivia, Barbados, Brunei darussalam, Cayman islands, Dominica, Ecuador, Egypt, Guernsey, Gibraltar, Guadeloupe, Grenada, French guiana, Iceland, Jersey, Jordan, Cambodia, Saint kitts and nevis, Saint lucia, Liechtenstein, Sri lanka, Macao, Monaco, Maldives, Montserrat, Martinique, Nicaragua, Oman, Pakistan, Peru, Paraguay, Reunion, Turks and caicos islands, Aruba, Saudi arabia, South africa, United arab emirates, Ukraine, Chile, Bahamas, Colombia, Costa rica, Guatemala, Honduras, Jamaica, Kuwait, Panama, Philippines, Qatar, Trinidad and tobago, Uruguay, Viet nam.

• Function: Milling
• Control: CNC

DAN’S MACHINE TOOL, INC. A FULLY REBUILT 9″ X 42″ BRIDGEPORT MILLING MACHINE. 220V / 3 PHASE / 1.5 MOTOR. NEW BEARINGS, BUSHINGS, KEYS, BELTS, AND GEARS IN THE HEAD. HAS A BRAND NEW X AXIS POWER FEED. BRAND NEW X AND Y SCREWS AND NUTS. TABLE HAS BEEN REGROUND, SCRAPED, FLAKED AND ALIGNED. MACHINE HAS BEEN RECENTLY PAINTED. ARE YOU LOOKING FOR A PART OR TOOLING FOR YOUR METAL FABRICATION MACHINE? IS YOUR MACHINE NOISY? JUST NEED SOME ADVISE? CALL DAN’S MACHINE TOOL, INC. (714) 666 – 1266. WE SELL MOST BRIDGEPORT MILL PARTS (VARI SPEED & STEP PULLEY). CLOCK/QUILL SPRINGS, HANDLES, BELTS, BEARINGS, KNOBS, HANDWHEELS, SWITCHES, HUBS, PULLEYS, WIPERS, NUTS, BOLTS, DRAWBARS, REPAIR KITS: 1 1/2HP, 2 HP STEP PULLEY AND OR VARI SPEED. IF YOU NEED A HARD TO FIND PART CALL DAN’S MACHINE TOOL, INC. OVER 30 YRS OF REPAIR AND REBUILDING EXPERIENCE ON ALL METAL WORKING MACHINERY INCLUDING BUT NOT LIMITED TO. ACRA, BRIDGEPORT, CINCINNATI, HARDINGE, LAGUN, LE BLOND, KENT, MORI SEIKI, SCOTCHMAN AND MORE. SPECIALIZES IN REPAIR & REBUILD, NEW & USED TOOLING, SALES OF NEW AND PREOWNED MACHINES, MANY IN STOCK: MILLS, LATHES, GRINDERS, BANDSAWS, IRONWORKERS. The item “FULLY REBUILT BRIDGEPORT MILLING MACHINE 9 X 42″ is in sale since Wednesday, March 20, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “qjen1″ and is located in Anaheim, California. This item can’t be shipped, the buyer must pick up the item.

• Modified Item: No
• Country/Region of Manufacture: United States
• Custom Bundle: No
• Make: Bridgeport
• Brand: Bridgeport

Table Size 30″ x 8″, 30 ISO Table. We try our best to dispatch same day. Some items are collection only as we deem they could be easily damaged in transit. The item “Harrison 3 Phase Vertical Milling Machine Fully Working Includes VAT & Delivery” is in sale since Monday, March 2, 2020. This item is in the category “Business, Office & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “toolz4youltd” and is located in Castleford. This item can be shipped to United Kingdom, Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, United States, Bahrain, Canada, Japan, New Zealand, China, Israel, Hong Kong, Norway, Indonesia, Malaysia, Mexico, Singapore, South Korea, Switzerland, Taiwan, Thailand, Bangladesh, Bermuda, Bolivia, Barbados, Brunei darussalam, Cayman islands, Egypt, Guernsey, Gibraltar, Guadeloupe, French guiana, Iceland, Jersey, Jordan, Cambodia, Liechtenstein, Sri lanka, Macao, Monaco, Maldives, Martinique, Nicaragua, Oman, Paraguay, Reunion, Saudi arabia, South africa, United arab emirates, Ukraine, Bahamas, Colombia, Jamaica, Kuwait, Panama, Qatar, Uruguay.