For Sale by Equipment Recycle is an. MSC 9512518 Vertical Heavy Duty Milling & Drilling Woodworking Machine. The specs on this machine are 115V, 2HP, and 1725RPM. It has a 30″ X 13-1/2″ table. This machine is mounted onto a wooden cart with 4 drawers. One of the drawers has some pads and tooling in it. This machine runs very smoothly. This item was removed from a local machine shop. It powers on and is operational. There are a few spots with some scratches, one of the handles are broken, and the table shows some wear. There also may be other normal wear on the machine from use with the previous owner. Please see photographs for clarification. Here is your chance to own this for a fraction of retail! We are here to help! 4 = Like New 3 = Good 2 = Poor-Fair 1 = As-Is. At Equipment Recycle we shoot for the stars. We want all 5 stars from you and will do what it takes to earn them. So before leaving feedback or low star ratings give a chance to correct any issue. Our feedback settings are automated. We believe that the customer comes first and we go above and beyond to correct any issue that may occur. We are a small family run equipment broker and consignment company. We offer a market analysis on your product and then give you the option to sell or consign your item with us. We believe that we can sell anything and there is no job or product to big. Let us sell your equipment and help you or your company grow. There is a large customer base out there just waiting to be reached and Equipment Recycle is the company to reach them for you. Let Equipment Recycle bring the world to you! Buyers without these will be subject to a lift gate charge. The sale of this item may be subject to regulation by the Food and Drug Administration and state and local regulatory agencies. Equipment Recycle is the consignee of most of the items we sell. Equipment Recycle has used its best efforts to inspect the item(s) for sale and create descriptions and furnish photographs that fairly and adequately depict the type, condition and image of the goods at the time of sale.

Master Mill / Versa Mill Model B. With X Y Table. With Horizontal Mill Setup. We also are including a COPY of the 21 page catalog shown in the pictures ALONG with our 127 page Dumore Versa Mill instruction manual…. Master Mill is the predecessor to the Dumore version. They bought them out. We have both and I believe the accessories are universally used between them? But we don’t have enough accessories to be completely confident in that statement. This is the MODEL B is used on a 13″ to 20″ swing lathe. This machine has a 7″ x 7/8″ arbor for horizontal milling. The support is not found in the catalog we are providing. But there is a lot of arbor that is not used with support. We did show in one of our pictures what they are using for support. Also, they made a lot of different sized arbors inching 1″ and 1-1/4″ see pictures. We also found that most of our involute gear cutters require the 7/8 arbor, which this one has. The machine is great shape! The up and down movement, crank handle, on the tower is slightly bent at the top. IT HAS NO EFFECT on the use. The shaft has no backlash and is tight because of its split nut design. The feed table cross slide dose have some back lash. The motor included is from our inventory. Its a Jet 1/2 hp model with correct speed and spindle size. This was the standard size motor offered. There was a option for a 3/4 hp as well. Tested and works great. Wired 115v but can be switched 220v. The pulley is also the correct 6 model needed. We didn’t mount the motor for 2 reasons. 2 It appears the original motors, SCREW mounted into the motor frame to hold them on. We are going to let you decide how to handle this. The cured piece on the tower, with the dovetail and swivel is the motor mount. FEED TABLE : The Master Mill version is UNIQUE because is swivels 360 degrees!! Versa mill doesn’t do that. Its a fixed 90 degrees. The XY table is very heavy on its own. If you want to know exactly what the charge will be, please ask before checkout. If not, please ask.

To my knowledge the CNC electrical components are fully functional. I even included an image of the CNC controller and display powered up (only needs 24v DC). What you see is what you get, along with a box of cables, connectors and fiber optic cables not shown. The parts were removed with care as not to damage them. If you need more information or images that I provided here, feel free to ask and I’ll do my best to answer them.

AC100V-240V Mini Metal Milling Machine, Mini Drilling & Milling Machine, DIY Tool Benchtop Wood Lathe. We provide different cutters that can bore the processed material, milling grooves, slots, steps and other three-dimensional shapes, with plane engraving function, can meet a variety of processing needs. The bottom of the machine is equipped with well-made clamping pliers, which is easy to grip the work pieces of various sizes and specifications, and the clamping effect is good and will not be loosened to ensure good milling effect. Features lightweight design for easy student operation; clearly visible graduated dial aids precise positioning; simple and durable mechanical structure ideal for frequent educational use. Manually rotates to control left-right (X-axis) table movement for basic milling and drilling position adjustments. The mini drilling-milling machine’s rotary collet features 8 interchangeable brass collets with a quick-release mechanism, enabling tool changes within 10 seconds for convenient operation. Manually rotates to control vertical spindle head movement for drilling depth or milling height regulation. The milling machine is powered by a 12V safe direct current transformer and features an all metal construction that significantly enhances equipment stability and durability. Its compact and lightweight design ensures optimal portability and adjustability to accommodate diverse working environments and processing requirements. This micro drilling-milling machine serves as an ideal tool for DIY enthusiasts and model makers to create various crafts, effectively developing manual dexterity and independent thinking skills. It is widely applicable in school workshops, youth activity centers, STEM labs, and hobbyist applications. Input voltage: AC100V240V Output voltage: DC12V Direct current: 3A Motor rated power: 36W Motor speed: 20000r/min±15% Spindle speed: 3000r/min±15% Spindle jump. Product Features & Advantages. Purpose – This is a MINI metal lathe/milling machine driven by a 12V safe direct current transformer, capable of turning, drilling, boring, threading and other machining operations. Processing – It can shape and cut various materials including wood, plastics and soft metals (pure copper and pure aluminum), but not alloys. When processing harder materials, use smaller feed rates at slower speeds than woodworking. Several shims are provided to adjust turning tool height. Durability – Constructed with premium aluminum alloy for long-lasting rigidity during operation, resistant to deformation. The milling function is compatible with micro drill bits and drill stand series. Compact & Portable – Occupies minimal space in your workshop or lab, making it perfect for small projects or hobbyists, and an excellent teaching tool for children. Applications – Suitable for youth activity centers, school technical rooms, STEM labs, DIY hobbyist workshops, and student innovation projects in science museums. Open End Wrench 1. Orders are processed from Monday-Friday; Not on the weekends & public holidays. We will work with you to get the case resolved in the fastest method. Hope for your understanding. Please contact with us at first for more details. Defective & Damaged Products. If product was received damaged or not as described, please send us some pictures or videos, so we could well understand your problem, then solve them for you ASAP. Besides, it’s much helpful for us to claim with UPS, remind our related department to pay much more attention to packaging later on. If an item is received damaged, customer service must be contacted within 7 days of receiving your item. Payments via eCheck do not clear immediately. Usually you will wait 5-7 days after checkout for it to clear.

Roland iModela iM-01 Mini CNC – Mill. USED – please read full description. NOTE – original power supply was lost and previous owner hardwired a cord for new power supply – works fine – see pictures. Missing front and rear clear shields – a plain acrylic sheet for the front is included. Powers up and initializes properly – see video. Was in working condition when I bought it – have not installed software and tested myself. Includes accessories and cutters shown in pictures. Includes SD CARD with all software, documentation, teardown and operation videos, etc – see screengrabs of contents. Will be well-packed.

DMG MORI NHX 4000 (2013). COORIDINATE SYSTEM ROTATION, 48 WORKPIECE OFFSETS PART PROGRAM STORAGE LENGTH 512 KB 1000 REGISTERABLE PART PROGRAMS IN TOTAL LOCATION: NEW JERSEY. M730BM W/ MAPPS (FULL FOURTH). 1 DEGREE; 2 PALLET STATIONS. CAT-40 (60) STATION TOOLCHANGER. COORIDINATE SYSTEM ROTATION, 48 WORKPIECE OFFSETS PART PROGRAM STORAGE LENGTH 512 KB 1000 REGISTERABLE PART PROGRAMS IN TOTAL. COOLANT SYSTEM – 2 PALLETS – 60 STATION AUTOMATIC TOOL CHANGER – DAIKIN CHILLER – CHIP CONVEYOR.

Intelligent Desktop Laser Cutter & Engraver: Thanks to the dual 16MP smart cameras, xTool P2 CO2 laser engraver can automatically construct 3D models of curved objects to make curved surface engraving as perfect as flat, can intelligently recognize shapes to fill pattern on multiple objects and engrave them in one batch. If assembled with the Automatic Conveyor Feeder, xTool P2 also provides the automatic passthrough for precision and convenience when engraving and cutting extra-large materials. Superb Laser Cutting & Engraving : xTool P2 Desktop CO2 laser cutter has a powerful 55W(55000mW) laser tube that allows you to cut 18mm black walnut and 20mm acrylic in only one pass. 3mm basswood can be surprisingly cut at the speed of 35mm/s, 6 times faster than a 20W diode laser. Assembled with a superior motor, the sturdy xTool P2 makes it possible to engrave at an ultrafast speed of 600mm/s. Boundless Creativity: The 26″×14″ large bed size and 2.7 maximum engraving height enrich you with even more possibilities for creations. If with the help of the Riser Base, you can easily engrave on 8.4 objects. Moreover, P2 is also Compatible with RA2 Pro rotary attachment to unleash your creativity on tumblers, mugs, spheres and rings. Create with hundreds of materials: As a smart CO2 laser cutter and engraver machine, xTool P2 has ultra-high absorption efficiency on most materials, perfect for cutting acrylic of all color, wood, leather, MDF, rubber, fabric, engrave on glass, ceramic, slate, coated metal, anodized aluminum, and more. Safer and Cleaner: Enclosed in design, xTool P2 is equipped with automatic lock, emergency stop button, hydraulic support, fire safety, and multiple warning systems to provide all-around protection for you. With the built-in adjustable air assist and slats, you can unquestionably trust P2′s excellent smoke exhaust system including the 145CFM exhaust fan, which can effortlessly distance the materials from annoying smoke. Note? If the temperature drops below 10°C (50?), please add antifreeze under the guidance in the user mannual. XTool P2 is the Class 4 laser engraver, the laser output power is 55000mW.

Make: TREE Model: 2VG. Good working American made, Tree manual mill. Available to view under power. Located in Chatsworth, CA. Forklift on site for loading. Variable Speed 3HP Spindle. Powerfeed on Longitudinal Travel. Cross / Transverse Travel. Vertical / Knee Travel. Specifications subject to verification. Items over 1000 lbs. We will not palletize, skid or crate an item over 1000 lbs. These items are prepared for transit by wrapping the item’s electrical components with stretch wrap and spraying down any exposed metal surfaces with protective oil. This is usually the case with top-heavy items, such as grinding machines. We accept all major credit cards except American Express. Orders are not processed until they’re paid in full.

110V 1300W RCOG-28V Brushless Precision Milling and Drilling Machine. RCOG-28V multi-functional drilling and milling machine has rich functions, can meet the metal, wood, plastic, Buddha beads and other finishing, all copper brushless motor, strong power, simple operation, durable, high processing accuracy, is the. DIY processing of various parts of the necessary machine. ±90°(The nose can actually rotate 360 degrees). Distance from spindle to table. The Range of spindle speeds. 27.5″7.1″(700mm180mm). 35.4″22.4″37.8(90cm57cm96cm). 260.1LB(118kg)/313.0LB(142kg). Product Features & Advantages. The rotating speed display and the drilling and milling depth display are all high-definition LCD display, Compared to the digital tube display more clear, rich. Display units can be switched between inches and mm. With one key start/stop protection switch and positive/negative switch, the spindle speed can be adjusted within the range of 50-2250rpm, easy to operate, Waterproof switch, safer. Workbench is equipped with a bench clamp, Bench clamp is fixed on the workbench, Can be used to clamp a variety of workpiece processing, clamping effect is good, save time and effort. Motor power up to 1300W!! Adopt high quality brushless motor, with overload and overheating protection function;Belt drive, high efficiency, low energy consumption, low noise; Long service life. The head of the machine can be tilted to the left and to the right by loosening the fixing screws of the head of the machine. The tilt Angle range is up to 90° which is easy for drilling and milling special angles. Spindle micro feed locking handle, convenient manual control of drilling and milling depth, release the hand can automatically return to the starting position. The processing table is designed behind the drainage hole, through the connection of the hose can be discharged at any time in the process of cooling liquid and excess oil. With drilling, plane milling, milling groove, chamfering and other functions, suitable for all kinds of metal, wood and other materials fine processing, Widely used in all walks of life DIY. Powerful function: This is a multi – functional drilling and milling machine, can complete drilling and milling operations. Also can be used for precision parts processing, sample processing and model. Brushless motor: Adopts 1300 watt high power pure copper brushless motor, strong power, can work continuously for a long time; At the same time, the belt drive is used for lower noise. All metal: It USES an integrated spindle and brass gear, which makes it not only precise but also durable. Variable-Speed: Weather you need high speed or lower speed spindle operations this machine can handle it. Boasting a 50-2250 RPM spindle speed for the extreme precision your project needs. It is important to note that this lathe has only a metric scale. Drilling and milling machine 1. Milling chuck set 1. Drill chuck retaining pin 1. Drill chuck wrench 1. Orders are processed from Monday-Friday; Not on the weekends & public holidays. We will work with you to get the case resolved in the fastest method. Hope for your understanding. Please contact with us at first for more details. Defective & Damaged Products. If product was received damaged or not as described, please send us some pictures or videos, so we could well understand your problem, then solve them for you ASAP. Besides, it’s much helpful for us to claim with UPS, remind our related department to pay much more attention to packaging later on. If an item is received damaged, customer service must be contacted within 7 days of receiving your item. Payments via eCheck do not clear immediately. Usually you will wait 5-7 days after checkout for it to clear.