KA-300 linear scale KA300 Small size Linear Scale with 0.0002 accuracy for metal working – lathes, cylindrical grinders, milling machines, surface grinders. (1) The encoder must be installed with the guide rail of machine tool as thebenchmark and be kept in parallel. The center of encoder measuring range must be positioned on the center of travel of machine tool. Ensure that the actualmeasuring range of encoder is higher than the maximum travel of machine tool.

Milling Machine Accessory – Right Angle Attachment R8 fits Bridgeport. Milling Machine Right Angle Attachment. Fits Bridgeport-style milling machines with a 3 3/8 (8586mm) quill diameter and R8 spindle taper Converts a vertical mill into a horizontal mill. Note: Maximum allowed speed with right angle attachment is 2000 rpm. Spindle runout is ± 20 micron (0.00078″) WHAT YOU’LL RECEIVE Right angle attachment, R8 stub arbor, Drawbar extension socket, 7/16-20 bolt with 1/2″ hex head Wooden box. If You have any questions regarding this item, please let us know we’ll be happy to help.

CINCINNATI 10 DIVIDING HEAD.

TS-125 Keyway Slotting Head, Shaping Attachment for Milling Machine, 220V, 3-ph. Supports direct mounting or mounts to back of milling machine ram with flange (Flanges are ordered separately). Specially designed worm and worm gear with mechanical linkage transmission. Well constructed and with high power output. The sliding surfaces are hardened and precision ground. Built-in lubrication system for smooth operation and prolonging service life of the slotting head. Number of speeds: 5 speeds. Stroke speed (on 60Hz): 35, 54, 79, 112, 160 stroke per minute. Motor: 3/4HP – 6 pole. Slotting bar with insert (6mm, 7mm, 8mm, 10mm). If You have any questions regarding this item, please let us know we’ll be happy to help.

Mill Machine Parts R8 Spindle + Bearings Assembly Fit BRIDGEPORT Milling US Product description: This product is a high quality R8 spindle + bearing for 3#4# milling machine. After the spindle is replaced, it can change the surface or side of the milling workpiece caused by the tool wear caused by the long wear of the spindle and the bearing clearance. Smooth, rough and uneven! Product specifications: Name: Milling R8 spindle + bearing Total length of the spindle: 545mm Head outer diameter: 46mm Spline outer diameter: 25mm D:25mm D1:20mm B:6mm Bearing position: 35mm and 30mm Packing size: 561010cm Weight: 4.2kg Scope of application: Most milling machines (3#4# milling machine) The package includes: 1X R8 spindle + bearing. NEW 1 SET BRIDGEPORT Milling Machine Parts R8 Spindle + Bearings Assembly Kit. Mill Machine Parts R8 Spindle + Bearings Assembly Fit Bridgeport Milling. This Product Is a High Quality R8 Spindle + Bearing for 3#4# Milling Machine. After the Spindle Is Replaced, It Can Change the Surface or Side of the Milling Workpiece Caused by the Tool Wear Caused by the Long Wear of the Spindle and the Bearing Clearance. Smooth, Rough and Uneven! Name: Milling R8 Spindle + Bearing. Total Length of the Spindle: 545mm. Head Outer Diameter: 46mm. Spline Outer Diameter: 25mm. Bearing Position: 35mm and 30mm. Scope of Application: Most Milling Machines (3#4# Milling Machine). 1x R8 Spindle + Bearing. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday. Great Durability, Exquisite Appearance, High-quality. Milling R8 spindle + bearing. Total length of the spindle. Most milling machines (3#4# milling machine).

Machining Centres Bt40/50-90 Degree Angle Head Side Right Angle Milling Heads. Otherwise we can’t guarantee the package would arrive smoothly. Return accepted in 30 days after you receive the item. Return package must be in the original packaging, item must be in new condition.

STRATHCLYDE HS-500 VERTICAL CNC MILLING MACHINE.

/ Template: Frooition Description: Version: 1.2 /. CNC Vertical Machining Centers. America’s Premier Machine Tool Dealer. Providing Quality Machining and Fabrication Machinery Solutions. Air Cooling & Heating Equip. Chemical & Processing Equip. Cleaning, Painting, & Washing. CNC Horizontal Machining Ctrs. Electrical and Power Equipment. Glass and Window Machinery. Inspection & Measuring Equip. Paper & Printing Equipment. Tube and Pipe Machinery. Add to Favorite Sellers. Sign up to Newsletter. Multicam 3000 Series 4′ x 8′ CNC Router w/ ATC & Vacuum Pump. Multicam Pendant Control, Columbo Spindle, Vacuum Pump, 6 Position ATC. Can be inspected upon request. We always recommend machine be inspected in person to verify condition. The Equipment Hub is a used machinery dealer and auctioneer that provides superior industrial equipment solutions to manufacturers throughout the world. We operate in a 40,000-square-foot warehouse and showroom located in Stone Mountain, Georgia with satellite offices located in Florida, North Carolina, and Texas. Established in December 2011, our core belief is that superior customer service is of paramount importance to the success of our company and yours. As proud members of the MDNA (Machinery Dealers National Association) we back up our core belief by providing 30-day MDNA return privileges on most of the machinery we sell. The Equipment Hub provides various services to help manufacturers achieve their machinery goals. We look forward to doing business with you and becoming a lifelong business partner. If you prefer to set up your own trucking we will place the item on a standard pallet with metal banding. If you need a custom pallet or skid built we can direct you toward local companies that provide these services. S place of business, unless otherwise specified on the accompanying “quote/invoice” form. The Equipment Hub SHALL NOT BE RESPONSIBLE FOR THE CONSEQUENCES OF PURCHASER’S FAILURE TO INSPECT THE EQUIPMENT OR MERCHANDISE OR FOR ANY INACCURACIES, INSUFFICIENCIES, OR OMISSIONS IN SUCH DESCRIPTIONS, SAMPLES, TOLERANCES AND/OR SPECIFICATIONS. The employees or representatives of The Equipment Hub are not authorized to make any statement or representation as to the quality, character, size, condition, quantity, etc. Of the equipment and merchandise offered for sale inconsistent with these Terms and Conditions. Any such statements made will not be binding on The Equipment Hub or be grounds for any subsequent claim. STORAGE: The Equipment Hub will provide up to 30 days of free storage, unless otherwise specified on the accompanying “quote/invoice” form. Basis or brokered bears a thirty day return privilege. All implied warranties of merchantability and fitness for a particular purpose are hereby disclaimed and excluded from this agreement. Care is taken to give reliable descriptions but these are not guaranteed and prospective purchasers are advised to check vital details. We also reserve the right to correct any stenographic errors. All specifications and descriptions of said goods are approximate only. THE WARRANTIES DISCLAIMED HEREUNDER INCLUDE, BUT ARE NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. No salesman or other representative of The Equipment Hub has authority to make any warranties. It is Purchaser’s responsibility to inspect the goods and to ascertain if the specifications, tolerances, descriptions and condition of the goods conform to the Purchaser’s requirements. Purchaser does hereby discharge The Equipment Hub from any and all liability directly or indirectly resulting from the presence of the aforesaid chemicals or materials, including and not limited to any and all liability directly or indirectly resulting from the failure of The Equipment Hub to give more specific warning with respect to individual articles or substances or from the inadequacy of any warning. Suggestions by The Equipment Hub regarding the design, specification, tolerances, use or suitability of the Products are made in good faith but are not binding upon any party and do not give rise to any liability by The Equipment Hub. MODIFICATIONS/ SEVERABILITY: Purchaser acknowledges that these are the only Terms and Conditions of sale, and is intended by the parties as a complete and exclusive statement of the terms of their agreement. This supersedes all prior agreements, written or oral. Any variation from the terms hereof contained in the Purchaser’s acceptance is hereby rejected. The agreement of which these terms are a part can be modified or rescinded only in writing signed by The Equipment Hub. If any provision of the invoice or these Terms and Conditions is determined illegal or unenforceable, it shall not affect the enforceability of any other provision or paragraph of the invoice or these Terms and Conditions. The remedy hereby provided shall be the exclusive and sole remedy of Purchaser and any right to consequential and incidental damages is excluded. You May Also Like. View more great items. Kongsberg X20 Edge 66″ x 50″ Reciprocating Knife CNC Router. $34,990.00. CAMaster CR-510 ATC 5′ x 10′ CNC Router ATC w/ Vacuum Pump (2019). $39,500.00. Thermwood C 53 5′ x 10′ CNC Router w/ Roller Holddown. $27,500.00. Thermwood CS 45 5′ x 10′ CNC Router w/ Vacuum Pump. $29,500.00. Shop Popular Used Machinery Categories. This listing is currently undergoing maintenance, we apologise for any inconvenience caused.

/ Template: Frooition Description: Version: 1.2 /. CNC Vertical Machining Centers. America’s Premier Machine Tool Dealer. Providing Quality Machining and Fabrication Machinery Solutions. Air Cooling & Heating Equip. Chemical & Processing Equip. Cleaning, Painting, & Washing. CNC Horizontal Machining Ctrs. Electrical and Power Equipment. Glass and Window Machinery. Inspection & Measuring Equip. Paper & Printing Equipment. Tube and Pipe Machinery. Add to Favorite Sellers. Sign up to Newsletter. Shop Sabre IS 408 4′ X 8′ CNC Router (2023). 88? X 133? X 93? 65? X 100? X 12? Ball Screw X, Dual Y, & Z Axis. Italian Built 10 HP 24,000 RPM. Shop Sabre WINCNC Industrial Controller Hardware & Software, 8GB Memory, 19? Flat Screen Monitor, Keyboard, Mouse, Full Sized Desktop with Solid State Drive, Vectric Vcarve Pro CAD/CAM Software, 6 Position ATC, Phenolic Table Top, Pop Up Reference Pins, T- Slot Table Top W Clamp Kit, Rigid Tapping, Digitizing Touch Probe, Coolant System, Shop Sabre CNC 4th Axis, KK Sweeps, Shop Sabre Air Gun, Wireless Hand Held Controller With Jog Wheel. Video will open in a new window. The Equipment Hub is a used machinery dealer and auctioneer that provides superior industrial equipment solutions to manufacturers throughout the world. We operate in a 40,000-square-foot warehouse and showroom located in Stone Mountain, Georgia with satellite offices located in Florida, North Carolina, and Texas. Established in December 2011, our core belief is that superior customer service is of paramount importance to the success of our company and yours. As proud members of the MDNA (Machinery Dealers National Association) we back up our core belief by providing 30-day MDNA return privileges on most of the machinery we sell. The Equipment Hub provides various services to help manufacturers achieve their machinery goals. We look forward to doing business with you and becoming a lifelong business partner. If you prefer to set up your own trucking we will place the item on a standard pallet with metal banding. If you need a custom pallet or skid built we can direct you toward local companies that provide these services. S place of business, unless otherwise specified on the accompanying “quote/invoice” form. The Equipment Hub SHALL NOT BE RESPONSIBLE FOR THE CONSEQUENCES OF PURCHASER’S FAILURE TO INSPECT THE EQUIPMENT OR MERCHANDISE OR FOR ANY INACCURACIES, INSUFFICIENCIES, OR OMISSIONS IN SUCH DESCRIPTIONS, SAMPLES, TOLERANCES AND/OR SPECIFICATIONS. The employees or representatives of The Equipment Hub are not authorized to make any statement or representation as to the quality, character, size, condition, quantity, etc. Of the equipment and merchandise offered for sale inconsistent with these Terms and Conditions. Any such statements made will not be binding on The Equipment Hub or be grounds for any subsequent claim. STORAGE: The Equipment Hub will provide up to 30 days of free storage, unless otherwise specified on the accompanying “quote/invoice” form. Basis or brokered bears a thirty day return privilege. All implied warranties of merchantability and fitness for a particular purpose are hereby disclaimed and excluded from this agreement. Care is taken to give reliable descriptions but these are not guaranteed and prospective purchasers are advised to check vital details. We also reserve the right to correct any stenographic errors. All specifications and descriptions of said goods are approximate only. THE WARRANTIES DISCLAIMED HEREUNDER INCLUDE, BUT ARE NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. No salesman or other representative of The Equipment Hub has authority to make any warranties. It is Purchaser’s responsibility to inspect the goods and to ascertain if the specifications, tolerances, descriptions and condition of the goods conform to the Purchaser’s requirements. Purchaser does hereby discharge The Equipment Hub from any and all liability directly or indirectly resulting from the presence of the aforesaid chemicals or materials, including and not limited to any and all liability directly or indirectly resulting from the failure of The Equipment Hub to give more specific warning with respect to individual articles or substances or from the inadequacy of any warning. Suggestions by The Equipment Hub regarding the design, specification, tolerances, use or suitability of the Products are made in good faith but are not binding upon any party and do not give rise to any liability by The Equipment Hub. MODIFICATIONS/ SEVERABILITY: Purchaser acknowledges that these are the only Terms and Conditions of sale, and is intended by the parties as a complete and exclusive statement of the terms of their agreement. This supersedes all prior agreements, written or oral. Any variation from the terms hereof contained in the Purchaser’s acceptance is hereby rejected. The agreement of which these terms are a part can be modified or rescinded only in writing signed by The Equipment Hub. If any provision of the invoice or these Terms and Conditions is determined illegal or unenforceable, it shall not affect the enforceability of any other provision or paragraph of the invoice or these Terms and Conditions. The remedy hereby provided shall be the exclusive and sole remedy of Purchaser and any right to consequential and incidental damages is excluded. You May Also Like. View more great items. Thermwood C 53 5′ x 10′ CNC Router w/ Roller Holddown. $27,500.00. Thermwood CS-42 10′ x 5′ CNC Router w/ Vacuum Pump. $39,950.00. CAMaster CR-510 ATC 5′ x 10′ CNC Router ATC w/ Vacuum Pump (2019). $39,500.00. Thermwood CS 45 5′ x 10′ CNC Router w/ Vacuum Pump. $29,500.00. Shop Popular Used Machinery Categories. This listing is currently undergoing maintenance, we apologise for any inconvenience caused.