Longitudinal Travel (Decimal Inch). Cross Travel (Decimal Inch). Knee Travel (Decimal Inch). Number of Spindle Speeds. Maximum Spindle Speed (RPM). Minimum Spindle Speed (RPM). 3-Axis Knee DRO System; X-Axis Power Table Feed. Spindle Travel Length (Inch). Quill Diameter (Decimal Inch). Spindle Power Feed Rate Per Minute (in/rev). 0.0015; 0.0030; 0.0060. Minimum Spindle to Table Distance (Inch). Maximum Spindle to Table Distance (Inch). Ram Travel Length (Decimal Inch). This unit shows signs of previous use/wear. Motor runs well and changes speed with the pulley. DRO system is in fully working order. The power feed was damaged and only operates in one direction. All mechanical functions work. We cannot find any real issues with this machine. Coolant pump has not been tested. Comes as shown in pictures. Please copy & paste link below to see a video of the machine running. All Local pickups are SUBJECT to cancellation AT OUR SOLE DISCRETION. Your transportation must EXCEED the capacity of the load, and MUST BE ABLE to have the item loaded with a Pallet. We will not unwrap an item to make it fit into your transport. We pass all of our discounts on to you. Florida is known for sudden downpours- so lets try to get everything loaded at dock height, shall we? The item “Enco 9 x 49 Knee Mill Milling Machine with Variable Speed Pulley & DRO 220V 3PH” is in sale since Monday, May 22, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “industryrecycles” and is located in Venice, Florida. This item can be shipped to United States.

• Brand: Enco
• Featured Refinements: Milling Machine
• MPN: Does Not Apply
• Country/Region of Manufacture: Unknown
• MSRP: $10,000
• Location: whs7xxx

Geared Head Mill / Drill Machine. W/ 3-Axis Newall DRO System. Swing Distance – 20. Table Length – 32. Table Width – 9-3/8. Longitudinal Travel – 20-1/2. Cross Travel – 8-1/4. Number of Spindle Speeds – 6. Speed Range – 65 to 1550 RPM. Spindle Travel – 5. Spindle Taper Size – 3MT / R8. This is an unused trade-show demo machine, in great overall condition. All of the electrical & mechanical functions work without issue. The digital readout and power feed have been tested and function properly as well. Please view our video & pictures for further detail. Comes exactly as shown. All Local pickups are SUBJECT to cancellation AT OUR SOLE DISCRETION. Your transportation must EXCEED the capacity of the load, and MUST BE ABLE to have the item loaded with a Pallet. We will not unwrap an item to make it fit into your transport. We pass all of our discounts on to you. Florida is known for sudden downpours- so lets try to get everything loaded at dock height, shall we? The item “Rong Fu Geared Head Mill / Drill Machine with DRO 20 Swing 220v 1 Ph. RF-45N2F” is in sale since Monday, May 08, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “industryrecycles” and is located in Venice, Florida. This item can be shipped to United States.

• Brand: Rong Fu
• Model: RF-45N2F
• MPN: Does Not Apply
• MSRP: $5000

A:link {color: #C81269; text-decoration:underline;} A:visited {color: #666666; text-decoration:underline;} A:hover {color: #333333; text-decoration:underline;} A:active {color: #C81269; text-decoration:underline;}. Content {font-family: Verdana, Arial, helvetica, sans-serif; font-size: 11px; font-style: normal; font-weight: normal; color: #000000; line-height: 18px; text-decoration:none; text-align: justify;}. Submenu{font-family: Verdana, Arial, helvetica, sans-serif; font-size: 11px; font-style: normal; font-weight: bold; color: #666666; line-height: 15px; left: 20px; margin-left: 20px; text-decoration:none;}. Content_white {font-family: Verdana, Arial, helvetica, sans-serif; font-size: 11px; font-style: normal; font-weight: normal; color: #FFFFFF; line-height: 16px; text-decoration:none; text-align: justify;}. Best_seller {font-family: Verdana, Arial, Helvetica, sans-serif; font-size: 12px; font-style: normal; font-weight: normal; color: #000000; text-decoration:none; text-align: left; padding: 0px;}. Best_seller_even {font-family: Verdana, Arial, helvetica, sans-serif; font-size: 12px; font-style: normal; font-weight: normal; color: #000000; line-height: 14px; text-decoration:none; text-align: left; padding-top: 10px; padding-right: 0px; padding-bottom: 0px; padding-left: 0px; background-color: #EBEBEB;}. Small {font-family: Verdana, Arial, Helvetica, sans-serif; font-size: 9px; font-style: normal; font-weight: normal; color: #000000; line-height: 18px; text-decoration:none; text-align: justify;}. M1 Micro Multi-function Machine Drilling and Milling Lathe machine 250mm 220V Y. T Type groove size8 mm. 1 X M1 Micro multi-function Machine kit. Unused/unopened merchandise will be fully credited. All emails will be answered within 24 hours. The item “M1 Micro Multi-function Machine Drilling and Milling Lathe machine 250mm 220V Y” is in sale since Monday, June 27, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “vipvshop” and is located in Shenzhen,Guangdong. This item can be shipped worldwide.

• Brand: Unbranded/Generic
• MPN: Does Not Apply
• Country/Region of Manufacture: China
• Model: M1

Best ALB-310 Horizontal 110V/220V power feed. This is a new power feed for horizontal milling with 16mm/17mm end shaft. It include everything you need to install this power feed. It is a very useful power feed system for the X axis to provide a smooth, variable speed drive to the travers of the table. This will enable control of the cut finish to a much greater extent than achievable by hand. With simple controls for left/right movement, auto stop in any position on the table provided by movable stops, overload protection and a fast traverse button giving 40 per min speed. Simple to fit and powered by a standard 110V/220V plug, so no wiring is required. If item Defective after 12 Month, Buyers can still send it back for repair. The item “Best price! ALSGS ALB-310 Horizontal 110V 220V power feed milling free shipping” is in sale since Monday, August 29, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “88490755″ and is located in shenzhen, guangdong. This item can be shipped worldwide.

• Brand: ALSGS
• MPN: No have
• Model: ALB-310

Item include: 1AL-310 power feed for X axis. It includes accessories for installion. If request Y or Z axis power feed, please leave a massage when place order! Milling machine power feeding apparatus with low noise, large torque, high speed, convenient installation and flexible operation, good appearance, as to meet the requirements of ergonomics. It’ll just take you 1 minute. We will work with you to solve any problems. The item “Best price ALSGS 110V 220V Power feed for Vertical milling machine X Y axis” is in sale since Saturday, November 26, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “88490755″ and is located in shenzhen, guangdong. This item can be shipped worldwide.

• Brand: ALSGS
• MPN: No have
• Country/Region of Manufacture: China

This Listing is for a. Here are some features of this milling machine. R8 Spindle Taper Standard, so it uses the most commonly available tooling. High Precision Tapered Roller Spindle Bearings. Dovetail Column for rigidity and repeatability in the Z Axis. Manual Fine Down Feed on spindle for boring. Comes Standard with Quill Depth DRO, and Large Milling Machine Type Handles for easier operation as shown. This is what is all included with this listing. Quill DRO is standard. Average time delivered is 2-7 days depending on how far from Pittsburgh you are, it could be a little longer in remote places but normally is very fast. If you would like to stop in and see one in person, we are at. Quality Machine Tools, 701 Parkway View Drive, Pittsburgh, PA 15205. We are machinists here too, so we know what we sell. This is really a top quality machine, and will last a long, long time. AND we are here for support too. We sell these machines regularly, we know them inside and out, and have been in business for many years, so if there is any question, we can help. Table Size 9″x31.5″. X Axis Travel 22. Y Axis Travel 8. Z Axis Travel (Knee) 17. Distance Spindle to Table – 18. Quill Travel 5. Spindle Taper R8. Main Motor Horsepower – 1.5HP. Voltage / Phase / Amps – 220 Volts, SINGLE Phase, 10 Amps. Approximate Machine Weight – 800 LBS. NO extra charge for residential or anything on these, as long as a truck can get to you, its covered. Check out our other auctions for more lathes and mills. The item “PM-932M 9×32 VERTICAL BENCHTOP MILLING MACHINE WITH R8 TAPER 220V SINGLE PHASE” is in sale since Monday, November 07, 2016. This item is in the category “Business & Industrial\Heavy Equipment\Milling Machines”. The seller is “qualitymachinetools” and is located in Pittsburgh, Pennsylvania. This item can be shipped to United States, to Canada.

• Make: Precision Matthews
• Model: PM-932M-BASIC
• Type: Manual, Vertical
• Model Year: 2016
• X-Axis Travel Bed: 21” – 25”
• Y-Axis Travel Bed: Less than 10”
• Z-Axis Travel Bed: 16” – 20”
• Highest Spindle Speed (RPM): 1501 – 2000
• Spindle Horsepower: 1.5
• Table Width: Less than 10”
• Table Length: 30” – 34.9”

Item include: 1AL-310 power feed for X axis. It includes accessories for installion. If request Y or Z axis power feed, please leave a massage when place order! Milling machine power feeding apparatus with low noise, large torque, high speed, convenient installation and flexible operation, good appearance, as to meet the requirements of ergonomics. It’ll just take you 1 minute. We will work with you to solve any problems. The item “Best price ALSGS 110V 220V Power feed for Vertical milling machine X Y axis” is in sale since Friday, October 21, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “88490755″ and is located in shenzhen, guangdong. This item can be shipped worldwide.

• Brand: ALSGS
• MPN: No have
• Country/Region of Manufacture: China

This Listing is for a. Here are some features of this milling machine. R8 Spindle Taper Standard, so it uses the most commonly available tooling. High Precision Tapered Roller Spindle Bearings. Dovetail Column for rigidity and repeatability in the Z Axis. Manual Fine Down Feed on spindle for boring. Comes Standard with Quill Depth DRO, and Large Milling Machine Type Handles for easier operation as shown. This is what is all included with this listing. Quill DRO is standard. Average time delivered is 2-7 days depending on how far from Pittsburgh you are, it could be a little longer in remote places but normally is very fast. If you would like to stop in and see one in person, we are at. Quality Machine Tools, 701 Parkway View Drive, Pittsburgh, PA 15205. We are machinists here too, so we know what we sell. This is really a top quality machine, and will last a long, long time. AND we are here for support too. We sell these machines regularly, we know them inside and out, and have been in business for many years, so if there is any question, we can help. Table Size 9″x31.5″. X Axis Travel 22. Y Axis Travel 8. Z Axis Travel (Knee) 17. Distance Spindle to Table – 18. Quill Travel 5. Spindle Taper R8. Main Motor Horsepower – 1.5HP. Voltage / Phase / Amps – 220 Volts, SINGLE Phase, 10 Amps. Approximate Machine Weight – 800 LBS. NO extra charge for residential or anything on these, as long as a truck can get to you, its covered. Check out our other auctions for more lathes and mills. The item “PM-932M 9×32 VERTICAL BENCHTOP MILLING MACHINE WITH R8 TAPER 220V SINGLE PHASE” is in sale since Friday, October 07, 2016. This item is in the category “Business & Industrial\Heavy Equipment\Milling Machines”. The seller is “qualitymachinetools” and is located in Pittsburgh, Pennsylvania. This item can be shipped to United States, to Canada.

• Make: Precision Matthews
• Model: PM-932M-BASIC
• Type: Manual, Vertical
• Model Year: 2016
• X-Axis Travel Bed: 21” – 25”
• Y-Axis Travel Bed: Less than 10”
• Z-Axis Travel Bed: 16” – 20”
• Highest Spindle Speed (RPM): 1501 – 2000
• Spindle Horsepower: 1.5
• Table Width: Less than 10”
• Table Length: 30” – 34.9”

Rong Fu RF-40 Gear Head 6 Speed 220V Bench Type Milling Drilling Machine New. Received in a load of surplus. The quill feed handle was broken and has been repaired with weatherstripping adhesive. Also, the corner right above that handle got dinged. See close up photos of both issues. This has been tested and works fine. Do your research on Rong Fu milling machines. These typically require some fine tuning to really get dialed in but are capable machines. 220 volt single phase. Rapid spindle speed changes through quick-select gear shift levers-no belts to switch. Fast feed spindle/quill handles and a fine feed handwheel dial for wide range control. Tilting head 90 degrees left and right. Main Motor: 1.5 HP Speed: 1 Speed Spindle RPM: 651550 (6 speeds) Taper: MT3 Stroke: 130mm Depth: 260mm Table Size: 730 x 210mm X Travel: 460mm Y Travel: 230mm Column Diameter: 115mm. New Original Packaging Distressed Opened for Inspection. Item(s) described above and exactly what’s pictured. Or choose a category on the left of this page. Posted by Nate —- Item ID 36977. Powered by SixBit’s eCommerce Solution. The item “Rong Fu RF-40 Gear Head 6 Speed 220V Bench Type Milling Drilling Machine New” is in sale since Monday, January 18, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “tcitytrans” and is located in De Soto, Missouri. This item can be shipped to United States.

• Country/Region of Manufacture: Taiwan
• Brand: Rong Fu
• Model: RF-40
• MPN: RF-40

220V 100W PROXXON mini milling machine MF70 bench driller. Base of grey cast iron. Including both vertical column and compound table of treated, quality aluminium. All axes are play-free and have adjustable gibs. Headstock of die-cast aluminium contains the 24 pole special (balanced) motor is super stable even at high operating speeds. This stability facilitates the use of the finest cutters. The triple slit, hardened steel MICROMOT collets cover 1.0 – 1.5 – 2.0 – 2.35 – 3.0 – 3.2mm. The table is fitted with 3 T-slots of the 12 x 6 x 5mm MICROMOT norm. An adjustable ruler scale eases the positioning of the workpiece. All handwheels are zero adjustable with 1 revolution = 1.0mm, 1 division = 0.05mm. Technical data: 220 – 240V, 100W, 50/60Hz. Spindle speeds 5,000 – 20,000rpm. Table 200 x 70mm with X-Y travel of 134 and 46mm respectively, with vertical travel 80mm. Footprint size 130 x 225mm and overall height 370mm. The clamping blocks depicted are included too, but not the workpiece! Technical Data: Power consumption: 220 – 240 V 50/60 Hz W. Speed: 5000 to 20000 g / min Table size: 200 70 mm X Stroke: 134mm Running Y: 46mm Base height: 370 mm grossWeight: 10 kg equipment Collets 1.0 to 3.2mm in diameter; Work plan with 3 T-slots (under Micromot 12 6 5 mm). The item “220V 100W PROXXON mini milling machine MF70 bench driller” is in sale since Tuesday, November 24, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “giron-ricar” and is located in San Salvador, San Salvador. This item can be shipped worldwide.