1994 YCM Supermax MAX-1 REBEL, 3-Axis CNC Vertical Machining Center/ LOW Hours -873h. Model MAX-1 (VMC-65A) 16 ATC. Table Size: 33″ x 16.53″. Table Load Capacity: 770 Lbs. Distance Spindle to Table Top: 29.52. Distance of Spindle Center to Column: 16.14. Spindle Speeds: 45 – 8000 RPM. Spindle Nose Taper: BT-40. Of Positions in Tool Changer: 16. Cutting Feed Rate, All Axis: 196.85 IPM. X & Y – Axis Rapid Traverse Rate: 629.92 IPM. Z-Axis Rapid Traverse Rate: 393.7 IPM. Overall Machine Dimensions: 97″ x 92″ x 93 High. Fanuc OM 3-Axis CNC Control System. Hardened and Ground Box Ways. Excellent condition, under power. The item “YCM Supermax MAX-1 REBEL, 3-Axis CNC Vertical Machining Center” is in sale since Saturday, October 28, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “basarancorp” and is located in Hauppauge, New York. This item can be shipped to United States.

• Brand: YCM
• Model: MAX-1 REBEL
• MPN: MAX-1 REBEL
• Country/Region of Manufacture: Taiwan

Machine is in working condition. The item “CNC Milling Machine, OKADA 3-AXIS” is in sale since Friday, November 17, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “kenneykha” and is located in Fountain Valley, California. This item can’t be shipped, the buyer must pick up the item.

• Brand: OKADA
• Country/Region of Manufacture: Japan

VARIABLE SPEED Vertical Bench Type Milling Machine with chip tray, as shown. This machine uses 120V Standard Power! Main Features Of This Machine. Completely different factory, castings, and design than many others out there, GREATLY improved design. Extremely Reliable, Brushless DC Variable Speed Motor Included Standard. Belt Drive Design, For Smoother, Quieter Running. Extra Large Column To Base Mount, Over 400% More Area, Makes A Much More Rigid Machine, Greatly Improved Over Other Machines In This Size Range. 3 Bolt Head to Column Mount is Standard, Also For Increased Rigidity. Runs in both Forward and Reverse, Good for Tapping. Larger Dials at Table Ends, Graduated in. 001, For Easier to Read, Accurate Table Movements. Leadscrews Are True Inch Pitch Screws (Not Metric Conversions Like Many), 10 Threads Per Inch. More Information below under the DESCRIPTION Tab below It is NOT just the same old model with just a belt drive upgrade Be sure to compare carefully. Special Features that set this mill apart from others (BE SURE TO COMPARE THESE DIFFERENCES). Quill DRO Included Standard (This is for the spindle up/down movement). 3 Bolt Head Mount is now standard (where the head mounts to the Z Axis), for more rigidity when milling Much improved over the single bolt mount type. Main Z Axis Column is attached to the base with 4 bolts, and mounted from the top, with a wide, proper mounting surface for much more rigidity over other models in this size range. 001 Readings with larger dials on the X and Y axis, with true 10 Thread Per Inch Leadscrews make it easier to cut accurately One line on the dial is. 001, one full turn of the handwheel is. 100, much easier to use than those with odd metric conversions. Precision ground ways for smoother movements Not just rough milled. Thrust Bearings in leadscrew ends not bushings Much smoother movements and less backlash. Split nuts on X and Y Axis to allow for backlash adjustment. DC BRUSHLESS MOTOR, Variable Speed, POWERFUL, SMOOTH, and RELIABLE Belt Drive from Motor to Spindle runs MUCH quieter than others, and eliminates any failure prone plastic gears (And the hassle of changing them when stripped). Average time delivered is 2-7 days depending on how far from Pittsburgh you are, it could be a little longer in remote places but normally is very fast. Quality Machine Tools, 701 Parkway View Drive, Pittsburgh, PA 15205. We are machinists here too, so we know what we sell. This is really a top quality machine, and will last a long, long time. AND we are here for support too. We sell these machines regularly, we know them inside and out, and have been in business for many years, so if there is any question, we can help. Variable Speed with Belt Drive and Brushless DC Motor. PM25MV (DC Brushless Motor, and Belt Drive Head is Standard). End Milling Capacity 3/4. Face Milling Capacity 2/1/2. Table Size 27-1/2 x 7-1/8. Cross Travel (Y Axis) 7. Longitudinal Travel (X Axis) 19. Table Leadscrew Pitch 10 TPI. Vertical Travel (Z Axis) 13. Max Distance Spindle to Table 13. Taper of Spindle R-8, w/7/16-20 Drawbar Thread. T Slot Size Actual size 12mm, our 1/2 kit listed is sized for this machine. Range of Spindle Speeds 50-2250rpm, 2 Steps. Headstock Tilt Left & Right ±90°. Machine Height (Without Stand) 38-1/2. Net Weight (Not Including Stand) 265 LBS. Net Weight (With Stand) 350 LBS. Power Required 110/120V, Minimum 15 Amp Circuit (Do Not Use Extension Cords). NO extra charge for residential or anything on these, as long as a truck can get to you, its covered. Check out our other auctions for more lathes and mills. The item “PM-25MV VERTICAL BENCH TOP MILLING MACHINE, 3-AXIS DRO VAR SPEED FREE SHIPPING” is in sale since Friday, December 01, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “qualitymachinetools” and is located in Pittsburgh, Pennsylvania. This item can be shipped to United States, Canada.

• Brand: Precision Matthews
• MPN: PM-25MV
• Country//Region of Manufacture: China

General Info: Stock #: CD-171189 Location: Stone Mountain, GA Brand: Bridgeport Model: V2XT Serial: XT999 Approx. Below is a video of it in operation. We are glad to show under power. Video will open in a new window. If you have any specific questions or would like to set up a time to view this piece of machinery feel free to contact the contact person for this listing 7 days a week. Purchaser shall pay The Equipment Hub a late penalty on all amounts over 30 days past due computed on an interest rate equal to 18% per annum. The Equipment Hub SHALL NOT BE RESPONSIBLE FOR THE CONSEQUENCES OF PURCHASER’S FAILURE TO INSPECT THE EQUIPMENT OR MERCHANDISE OR FOR ANY INACCURACIES, INSUFFICIENCIES, OR OMISSIONS IN SUCH DESCRIPTIONS, SAMPLES, TOLERANCES AND/OR SPECIFICATIONS. The employees or representatives of The Equipment Hub are not authorized to make any statement or representation as to the quality, character, size, condition, quantity, etc. Of the equipment and merchandise offered for sale inconsistent with these Terms and Conditions. Any such statements made will not be binding on The Equipment Hub or be grounds for any subsequent claim. All implied warranties of merchantability and fitness for a particular purpose are hereby disclaimed and excluded from this agreement. Care is taken to give reliable descriptions but these are not guaranteed and prospective purchasers are advised to check vital details. We also reserve the right to correct any stenographic errors. All specifications and descriptions of said goods are approximate only. THE WARRANTIES DISCLAIMED HEREUNDER INCLUDE, BUT ARE NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. No salesman or other representative of The Equipment Hub has authority to make any warranties. It is Purchaser’s responsibility to inspect the goods and to ascertain if the specifications, tolerances, descriptions and condition of the goods conform to the Purchaser’s requirements. Purchaser does hereby discharge The Equipment Hub from any and all liability directly or indirectly resulting from the presence of the aforesaid chemicals or materials, including and not limited to any and all liability directly or indirectly resulting from the failure of The Equipment Hub to give more specific warning with respect to individual articles or substances or from the inadequacy of any warning. Suggestions by The Equipment Hub regarding the design, specification, tolerances, use or suitability of the Products are made in good faith but are not binding upon any party and do not give rise to any liability by The Equipment Hub. MODIFICATIONS/ SEVERABILITY: Purchaser acknowledges that these are the only Terms and Conditions of sale, and is intended by the parties as a complete and exclusive statement of the terms of their agreement. This supersedes all prior agreements, written or oral. Any variation from the terms hereof contained in the Purchaser’s acceptance is hereby rejected. The agreement of which these terms are a part can be modified or rescinded only in writing signed by The Equipment Hub. If any provision of the invoice or these Terms and Conditions is determined illegal or unenforceable, it shall not affect the enforceability of any other provision or paragraph of the invoice or these Terms and Conditions. The remedy hereby provided shall be the exclusive and sole remedy of Purchaser and any right to consequential and incidental damages is excluded. The item “Bridgeport V2XT 9 x 48 3-Axis DX32 CNC Milling Machine” is in sale since Friday, December 01, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “equipmenthub” and is located in Alpharetta, Georgia. This item can be shipped to United States.

VARIABLE SPEED Vertical Bench Type Milling Machine with chip tray, as shown. This machine uses 120V Standard Power! Main Features Of This Machine. Completely different factory, castings, and design than many others out there, GREATLY improved design. Extremely Reliable, Brushless DC Variable Speed Motor Included Standard. Belt Drive Design, For Smoother, Quieter Running. Extra Large Column To Base Mount, Over 400% More Area, Makes A Much More Rigid Machine, Greatly Improved Over Other Machines In This Size Range. 3 Bolt Head to Column Mount is Standard, Also For Increased Rigidity. Runs in both Forward and Reverse, Good for Tapping. Larger Dials at Table Ends, Graduated in. 001, For Easier to Read, Accurate Table Movements. Leadscrews Are True Inch Pitch Screws (Not Metric Conversions Like Many), 10 Threads Per Inch. More Information below under the DESCRIPTION Tab below It is NOT just the same old model with just a belt drive upgrade Be sure to compare carefully. Special Features that set this mill apart from others (BE SURE TO COMPARE THESE DIFFERENCES). Quill DRO Included Standard (This is for the spindle up/down movement). 3 Bolt Head Mount is now standard (where the head mounts to the Z Axis), for more rigidity when milling Much improved over the single bolt mount type. Main Z Axis Column is attached to the base with 4 bolts, and mounted from the top, with a wide, proper mounting surface for much more rigidity over other models in this size range. 001 Readings with larger dials on the X and Y axis, with true 10 Thread Per Inch Leadscrews make it easier to cut accurately One line on the dial is. 001, one full turn of the handwheel is. 100, much easier to use than those with odd metric conversions. Precision ground ways for smoother movements Not just rough milled. Thrust Bearings in leadscrew ends not bushings Much smoother movements and less backlash. Split nuts on X and Y Axis to allow for backlash adjustment. DC BRUSHLESS MOTOR, Variable Speed, POWERFUL, SMOOTH, and RELIABLE Belt Drive from Motor to Spindle runs MUCH quieter than others, and eliminates any failure prone plastic gears (And the hassle of changing them when stripped). Average time delivered is 2-7 days depending on how far from Pittsburgh you are, it could be a little longer in remote places but normally is very fast. Quality Machine Tools, 701 Parkway View Drive, Pittsburgh, PA 15205. We are machinists here too, so we know what we sell. This is really a top quality machine, and will last a long, long time. AND we are here for support too. We sell these machines regularly, we know them inside and out, and have been in business for many years, so if there is any question, we can help. Variable Speed with Belt Drive and Brushless DC Motor 4. Way Cover Set 5. R8 Spindle Taper 7. Quill/Spindle Depth DRO 8. PM25MV (DC Brushless Motor, and Belt Drive Head is Standard). End Milling Capacity 3/4. Face Milling Capacity 2/1/2. Table Size 27-1/2 x 7-1/8. Cross Travel (Y Axis) 7. Longitudinal Travel (X Axis) 19. Table Leadscrew Pitch 10 TPI. Vertical Travel (Z Axis) 13. Max Distance Spindle to Table 13. Taper of Spindle R-8, w/7/16-20 Drawbar Thread. T Slot Size Actual size 12mm, our 1/2 kit listed is sized for this machine. Range of Spindle Speeds 50-2250rpm, 2 Steps. Headstock Tilt Left & Right ±90°. Machine Height (Without Stand) 38-1/2. Net Weight (Not Including Base) 265 LBS. Power Required 110/120V, Minimum 15 Amp Circuit (Do Not Use Extension Cords). NO extra charge for residential or anything on these, as long as a truck can get to you, its covered. Check out our other auctions for more lathes and mills. The item “PM-25MV VERTICAL BENCH TOP MILLING MACHINE, 3-AXIS DRO VAR SPEED FREE SHIPPING” is in sale since Friday, December 01, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “qualitymachinetools” and is located in Pittsburgh, Pennsylvania. This item can be shipped to United States, Canada.

• Brand: Precision Matthews
• MPN: PM-25MV
• Country//Region of Manufacture: China

General Info: Stock #: CD-171189 Location: Stone Mountain, GA Brand: Bridgeport Model: V2XT Serial: XT999 Approx. Table Size: 9″ x 48″. Z-Axis Travel (Quill): 5. Knee Travel: 14.5. Spindle Speeds: 60 – 4200 RPM. Spindle Taper: #30 Quick Change. Spindle Motor HP: 2. DX-32 CNC Control, Kurt Automatic Power Drawbar, Lubrication System, Pneumatic Spindle Brake, Pneumatically Actuated Spindle Speed Changer, Manuals. The CNC Mill is in good working condition. Below is a video of it in operation. Video will open in a new window. If you have any specific questions or would like to set up a time to view this piece of machinery feel free to contact the contact person for this listing 7 days a week. Purchaser shall pay The Equipment Hub a late penalty on all amounts over 30 days past due computed on an interest rate equal to 18% per annum. The Equipment Hub SHALL NOT BE RESPONSIBLE FOR THE CONSEQUENCES OF PURCHASER’S FAILURE TO INSPECT THE EQUIPMENT OR MERCHANDISE OR FOR ANY INACCURACIES, INSUFFICIENCIES, OR OMISSIONS IN SUCH DESCRIPTIONS, SAMPLES, TOLERANCES AND/OR SPECIFICATIONS. The employees or representatives of The Equipment Hub are not authorized to make any statement or representation as to the quality, character, size, condition, quantity, etc. Of the equipment and merchandise offered for sale inconsistent with these Terms and Conditions. Any such statements made will not be binding on The Equipment Hub or be grounds for any subsequent claim. All implied warranties of merchantability and fitness for a particular purpose are hereby disclaimed and excluded from this agreement. Care is taken to give reliable descriptions but these are not guaranteed and prospective purchasers are advised to check vital details. We also reserve the right to correct any stenographic errors. All specifications and descriptions of said goods are approximate only. THE WARRANTIES DISCLAIMED HEREUNDER INCLUDE, BUT ARE NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. No salesman or other representative of The Equipment Hub has authority to make any warranties. It is Purchaser’s responsibility to inspect the goods and to ascertain if the specifications, tolerances, descriptions and condition of the goods conform to the Purchaser’s requirements. Purchaser does hereby discharge The Equipment Hub from any and all liability directly or indirectly resulting from the presence of the aforesaid chemicals or materials, including and not limited to any and all liability directly or indirectly resulting from the failure of The Equipment Hub to give more specific warning with respect to individual articles or substances or from the inadequacy of any warning. Suggestions by The Equipment Hub regarding the design, specification, tolerances, use or suitability of the Products are made in good faith but are not binding upon any party and do not give rise to any liability by The Equipment Hub. MODIFICATIONS/ SEVERABILITY: Purchaser acknowledges that these are the only Terms and Conditions of sale, and is intended by the parties as a complete and exclusive statement of the terms of their agreement. This supersedes all prior agreements, written or oral. Any variation from the terms hereof contained in the Purchaser’s acceptance is hereby rejected. The agreement of which these terms are a part can be modified or rescinded only in writing signed by The Equipment Hub. If any provision of the invoice or these Terms and Conditions is determined illegal or unenforceable, it shall not affect the enforceability of any other provision or paragraph of the invoice or these Terms and Conditions. The remedy hereby provided shall be the exclusive and sole remedy of Purchaser and any right to consequential and incidental damages is excluded. The item “Bridgeport V2XT 9 x 48 3-Axis DX32 CNC Milling Machine” is in sale since Monday, November 20, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “equipmenthub” and is located in Alpharetta, Georgia. This item can be shipped to United States.

Welcome to some of the most user friendly, reliable and affordable DRO you will find anywhere! For the price you will find that these will stand up with any of the. Big name Brands on the market today! They have stood up to the test of time – with many satisfied customers already. These units are simply the best in terms of quality, value and functionality. Check out Store kits Available. Kits that come complete with high precision Glass Linear Scales and mounting hardware. Displays 2,3 or 4 axis controls with mounting arm. Kit can be set up at this price for machines from: 2″ to 40″ travels on Machine Tools. Kit comes complete with. 0002 readout display for a 2 & 3 axis- mill, lathe, grinder or EDM. Optional kit-digital linear scales – 5um resolution. One suspension arm is included with the display. 3-Scale guards (protect scale from elements). 4- scale mounting hardware (L shaped cover, bracket, screws, etc). One user manual in English. 5 um (0.0002″) resolution scales (display supports 0.1um. 00004″ & 10 um scales as well). Can be switched between Mill, Lathe, Grinder and EDM. Supports both English and Metric units (in/mm display). Absolute and Incremental measuring mode. Center line (1/2) function – Sub datum (200 points). Tool library (200 points). Linear drilling function Mill Mode. Bolt circle (PCD) machining in Mill Mode. Incline and oblique plane machining Mill Mode. Simple and Smooth Radius machining Mill Mode. Asymptotic machining of inner cavity (cambering) Mill Mode. Radius/Diameter function in Lathe mode. Taper function in Lathe mode – Axis summing in Lathe mode. Filter in Grinder mode. Linear and non-linear error compensation. Auto Zero/reference function – Calculator with trigonometric functions. Sleep Mode – Power Off memory. 100-240V, 50/60Hz universal AC power. Mounting Arm and hardware included. Toolmann is a US company and we stand behind our products. This item is GUARANTEED against DOA. Defective items will be replaced upon receipt and completion of manufacturers inspection process. Defects caused by improper installation, abuse, physical damage, and normal tear and wear are not covered. The item “DRO Ditron Display 3-axis Update or replaces most top name brands-programmable” is in sale since Sunday, April 23, 2017. This item is in the category “Business & Industrial\Heavy Equipment Parts & Accs\Manufacturing Equipment Parts\Digital Readouts”. The seller is “toolmannmachinery” and is located in Oshkosh, Wisconsin. This item can be shipped to United States.

• Brand: Ditron
• Type: Digital Readout
• Model Year: 2017
• Model: D80-3V
• Equipment Type: Machine Tools
• Equipment Make: Ditron
• Axis: 3 Axis
• MPN: 0200-02
• Compatible Equipment Type: EDM
• Compatible Equipment Make: ACURITE

PLEASE CALL JIM FOR MORE INFO 7146121480 SPECS TO BE CONFIRMED! SuperMax YCM 1-1/2 VS CNC 3-axis vertical mill. Anilam Crusader II control with Program Saver. Longitudinal Table Travel 34″; Cross Trave 12″; Vertical Knee Travel 16″; Ram Travel 12″. Spindle Speed Range: 60 to 4200 RPM Infinitely Variable Spindle Taper: R-8 Spindle Travel: 5 with (3) Feeds. 0053 IPR Head Tilts Front and Back: 45 Degrees Head Swivels Left and Right: 90 Degrees Includes: One Shot Lubrication System; Meehanite Machine Casting; (2) Adjustable Table Stops; Quill Handle, Manual Tool Draw Bar. Under Power or Operable. Anilam Crusader II with Program Saver. Max Weight of Work Piece. The item “SUPERMAX YCM 1-1/2 VS CNC 3-AXIS KNEE MILL WITH ANILAM CRUSADER II CONTROL” is in sale since Friday, June 10, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “tnt_industrial” and is located in Fountain Valley, California. This item can be shipped to United States.

• Brand: Unbranded/Generic
• MPN: Does Not Apply

This kit is set up for Bridgeport Mill or Type with 9″ x 42″ tables. 3- axis = 6″ or 16″ / 12″ / 30″ travels. Kit Scales= 1- 6″ quill or 16″ knee scale w/reader-head mount or 3-knee mounting brackets. 1- y axis 12 travel scale w/spar & cover + 2 mounting brackets. 1- x axis 30 travel sale w/cover & reader head shims. Nice Package- Fits Basic Mill Models. Welcome to some of the most user friendly, reliable and affordable DRO you will find anywhere! For the price you will find that these will stand up with any of the. Big name Brands on the market today, at half the cost. They have stood up to the test of time – with many satisfied customer’s already. These units are simply the best in terms of quality, value and functionality. We assemble and support this product here in USA- Stocking replacement parts. Comes complete with high precision Glass Linear Scales and mounting hardware. Displays 3 axis controls with mounting arm. Kits can be set up for machines from: 2″ to 40″ travels on Machine Tools. All in one model can be switched between Mill, Lathe, and Grinder. Let us put a Kit together for you today, just send travels & machine type. Great kit at a Great price. Kit comes complete with. 0002 readout D80 display for a 3 axis- mill, lathe, grinder or EDM. (3) digital linear scales – 5um resolution. One suspension arm is included with the display. 3-Scale guards (protect scale from elements). Mounting hardware (3- knee brackets or quill reader-head mount). One user manual in English. 5 um (0.0002) resolution scales. Can be switched between Mill, Lathe, Grinder and EDM. Supports both English and Metric units (in/mm display). Absolute and Incremental measuring mode. Center line (1/2) function – Sub datum (200 points). Tool library (200 points). Linear drilling function Mill Mode. Bolt circle (PCD) machining in Mill Mode. Incline and oblique plane machining Mill Mode. Simple and Smooth Radius machining Mill Mode. Asymptotic machining of inner cavity (cambering) Mill Mode. Radius/Diameter function in Lathe mode. Taper function in Lathe mode – Axis summing in Lathe mode. Filter in Grinder mode. Linear and non-linear error compensation. Auto Zero/reference function – Calculator with trigonometric functions. Sleep Mode – Power Off memory. 100-240V, 50/60Hz universal AC power. Mounting Arm and hardware included. Toolmann is a US company and we stand behind our products. This item is GUARANTEED against DOA. Defective items will be replaced upon receipt and completion of manufacturers inspection process. Defects caused by improper installation, abuse, physical damage, and normal tear and wear are not covered. The item “DRO Ditron 3-axis kit with 3-scales -XYZ axis Bridgeport Mill/type with9x42″ is in sale since Tuesday, July 18, 2017. This item is in the category “Business & Industrial\Heavy Equipment Parts & Accs\Manufacturing Equipment Parts\Digital Readouts”. The seller is “toolmannmachinery” and is located in Oshkosh, Wisconsin. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Chile, Colombia, Costa rica, Panama, Trinidad and tobago.

• Brand: Ditron
• Type: Digital Readout
• Model Year: 2017
• Model: D80-3V
• Equipment Type: Machine Tools
• Equipment Make: Ditron
• Axis: 3 Axis
• MPN: 0200-09
• Compatible Equipment Type: EDM
• Compatible Equipment Make: ACURITE

General Info: Stock #: CD-171189 Location: Stone Mountain, GA Brand: Bridgeport Model: V2XT Serial: XT999 Approx. Below is a video of it in operation. We are glad to show under power. Video will open in a new window. If you have any specific questions or would like to set up a time to view this piece of machinery feel free to contact the contact person for this listing 7 days a week. Purchaser shall pay The Equipment Hub a late penalty on all amounts over 30 days past due computed on an interest rate equal to 18% per annum. The Equipment Hub SHALL NOT BE RESPONSIBLE FOR THE CONSEQUENCES OF PURCHASER’S FAILURE TO INSPECT THE EQUIPMENT OR MERCHANDISE OR FOR ANY INACCURACIES, INSUFFICIENCIES, OR OMISSIONS IN SUCH DESCRIPTIONS, SAMPLES, TOLERANCES AND/OR SPECIFICATIONS. The employees or representatives of The Equipment Hub are not authorized to make any statement or representation as to the quality, character, size, condition, quantity, etc. Of the equipment and merchandise offered for sale inconsistent with these Terms and Conditions. Any such statements made will not be binding on The Equipment Hub or be grounds for any subsequent claim. All implied warranties of merchantability and fitness for a particular purpose are hereby disclaimed and excluded from this agreement. Care is taken to give reliable descriptions but these are not guaranteed and prospective purchasers are advised to check vital details. We also reserve the right to correct any stenographic errors. All specifications and descriptions of said goods are approximate only. THE WARRANTIES DISCLAIMED HEREUNDER INCLUDE, BUT ARE NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. No salesman or other representative of The Equipment Hub has authority to make any warranties. It is Purchaser’s responsibility to inspect the goods and to ascertain if the specifications, tolerances, descriptions and condition of the goods conform to the Purchaser’s requirements. Purchaser does hereby discharge The Equipment Hub from any and all liability directly or indirectly resulting from the presence of the aforesaid chemicals or materials, including and not limited to any and all liability directly or indirectly resulting from the failure of The Equipment Hub to give more specific warning with respect to individual articles or substances or from the inadequacy of any warning. Suggestions by The Equipment Hub regarding the design, specification, tolerances, use or suitability of the Products are made in good faith but are not binding upon any party and do not give rise to any liability by The Equipment Hub. MODIFICATIONS/ SEVERABILITY: Purchaser acknowledges that these are the only Terms and Conditions of sale, and is intended by the parties as a complete and exclusive statement of the terms of their agreement. This supersedes all prior agreements, written or oral. Any variation from the terms hereof contained in the Purchaser’s acceptance is hereby rejected. The agreement of which these terms are a part can be modified or rescinded only in writing signed by The Equipment Hub. If any provision of the invoice or these Terms and Conditions is determined illegal or unenforceable, it shall not affect the enforceability of any other provision or paragraph of the invoice or these Terms and Conditions. The remedy hereby provided shall be the exclusive and sole remedy of Purchaser and any right to consequential and incidental damages is excluded. The item “Bridgeport V2XT 9 x 48 3-Axis DX32 CNC Milling Machine” is in sale since Monday, October 02, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “equipmenthub” and is located in Alpharetta, Georgia. This item can be shipped to United States.