About of the item. Y-Axis power feed is made of aluminuml;Power Parameter: 95Watt, 110V input voltage, 50/60Hz, single phase;Rotate Speed:0-200 RPM. Max Torque:450in-lb;Max feed rate: 650mm/min; Max return speed: 850mm/min. AUTOMATIC AND MANUAL CONTROL? You can set this power feed to work at automatic constant speed to free your hands or work by manually adjusting the speed control knob to do more precise milling work. And this mulitfunctional milling machine power feed can work with excellent speed control in the entire range according to your needs. This power feed adopts Gleason Spiral Bevel Gear with advantages of stable transmission ratio, low transmission noise, high transmission efficiency and high bearing capacity. And when fast transmission, if the tool collides with the work piece or reverses instantaneously, the special safety device protects the transmission plastic gear and electronic parts from damage. PORTABLE AND EASY TO INSTALL? This power feed for milling machine is compact and portable. Weight: 5kg/11lbs, Size: 74.511.5 inch. And whether it is for a novice or a skilled operator, it is very easy to install this power feed according to the instruction and online video or by yourself. This power feed fits some milling machines like Bridgeport, Precision Matthews, Enco, Jet, Sharp, Acer, Webb, etc. This milling table power feed fits some vertical knee type mills with the same mounting pattern and a 5/8 diameter shaft on the end, But it will NOT fit mills with a different mounting pattern or different sized leadscrews like powermatic and some other odd sized machines, so please make sure yours is the typical Bridgeport type as mentioned above.

Model: 450 in-lb X-Axis. Rotate speed: 0-200 RPM. Max torque: 450 lbs. Max feed rate: 650mm/min. Max return speed: 850mm/min. Package size: 12.60 x 11.22 x 7.87 inches. Package weight: 12.83lbs. Your Best Online Business Partner. X-Axis Torque Power Feed Milling Machine 450lbs 200 RPM Adjustable 5/8 Shaft. 12.60 x 11.22 x 7.87 inches. X-Axis 450lbs Torque Power Feed Milling Machine 200 RPM Adjustable 5/8 Shaft. X-AXIS POWER FEED- Made of aluminum material. Rotate Speed: 200 RPM, Max Torque: 450lbs. Rotate speed- 0-200 RPM; Max torque: 450 in-lb; Max feed rate: 650mm/min; Max return speed: 850mm/min. Ergonomic Design- Power feed is equipped with safety feature to protect transmission gear and electronic components as to meet the requirements of ergonomics. Easy Setup- Small volume and easy installation, noiseless direction changes. Fit almost any horizontal knee type milling machine and other small machinery. Excellent speed control in the entire range. The speed can be adjust according to operator’s requirement. 1 x Power Feed For Milling Machine. 8 x Adjustable Pad. 2 x Tiavel Stop Assembly. 1 x Adapter; 1 x Bevel Gear. 1 x Dial Nut ;1 x Locking Nut. 1 x Product Manual. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. We are always listening to the customers and colleagues to keep innovating our products and service. Aluminum Emergency Hardware Door Push Bar Panic Exit Device Lock 28 – 36 in. 12V DC 155W Electric Fuel Transfer Pump Big Flow Rate With Fuel Meter Nozzle. 6T Machine Skates Heavy Duty Dolly Machinery Roller Movers Cargo Trolley 2Pcs. 6T 13200lb Machine Skates Heavy Duty Dolly Machinery Roller Movers Cargo Trolley. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “enterity” and is located in this country: US. This item can be shipped to United States.

• Machine Type: Mini Milling Machine
• Max feed rate: 650 mm/min
• Brand: Enterity
• Control: Manual
• Max return speed: 850 mm/min
• Style: X-Axis/450LBS
• Voltage: 110V, 50/60Hz
• Material: Iron, PVC
• Power Source: Electric
• MPN: 164137-Enterity
• Custom Bundle: No
• Rotate speed: 0-200 RPM
• Modified Item: No
• Max torque: 450 lbs
• Color: White
• Dimension: 12.60 x 11.22 x 7.87 inches
• Table Length: Table Length
• Weight: 12.83 lb
• Country/Region of Manufacture: China

X-AXIS POWER FEED – Voltage: 110V, 60Hz; Revolution Speed: 0-200 RPM. The power table feed is made of sturdy and durable aluminum material. It is also designed with a handle, buttons, and knobs for simple operation. LONG SERVICE LIFE – The power feed for milling machine features smooth and strengthened polished that resists water, oil, and dust. That ensures its long service life in an awful working environment. HIGH EFFICIENCY & PRECISION: The x-axis power feed is equipped with spiral bevel gears and bearings to achieve rapidity and high efficiency and precision as well. QUIET & EASY OPERATION – The milling machine power feed features 9 levels of moving speed, set by the rotary knob on the side. Moreover, it doesn’t make noises when moving, good news for a workshop. WIDE APPLICATION – The knee mill power feed fits most vertical knee mills with a 5/8 shaft end, such as Bridgeport, Precision Matthews, Grizzly, Enco, Jet, Sharp, Acer, Webb, etc. The compact power knee feed can work automatically at a constant speed or manually by pressing the speed control. And the circuit breaker protects the transmission gear and electronic components. The milling machine table power feed is made of rugged aluminum material. Its finish has been polished and resists corrosion and wear. That makes it work for a long time. The power feed for mill adopts spiral bevel gears to move freely and quietly on the mill. Considering that it is noisy in the garage, it would be helpful that the feed cut noises. The mill power feed is also equipped with precise bearings that ensure its smooth and stable movement. Less vibration and strain enhance the efficiency of the whole milling machine. The power feed for milling machine is easy to install and operate. Only a little maintenance is enough for its long-term regular running. The power table feed fits most vertical knee mills with a 5/8 shaft end, such as Bridgeport, Precision Matthews, Grizzly, Enco, Jet, Sharp, Acer, Webb, GMC, Kent, Clark, Supermax, etc. AL-310S X-Axis Power Feed Kit. Our AL-310S x-axis feed kit features a robust shell and precise components. It works efficiently and quietly on a milling machine with a 5/8 shaft end. Besides, it is designed with buttons and knobs for simple operation. It is a good choice for your milling machine. High Efficiency & Precision. Quiet & Easy Operation. Rotate Speed: 0-200 RPM. Max Torque: 450 in-lb. Max Feed Rate: 650 mm/min. Max Return Speed: 850 mm/min. Dimension: 8″x4.5″x13. Package Size: 11.8″x8.7″x13.8. Gross Weight: 16.5 lbs. 1 x Power Feed for Milling Machine. 8 x Adjustable Pad. 2 x Travel Stop Assembly. 1 x Bevel Gear. 1 x Dial Nut. 1 x Locking Nut. 1 x Product Manual. Power Feed Milling Machine. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. California Warehouse: City of Industry, CA. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. Caifornia Warehouse: 18501 Arenth Ave, City of Industry, CA 91748. 300 W Airtex Blvd, Suite 200, Houston, TX 77090. 2125 Gateway Blvd, Hebron, KY 41048. 1000 High Street, Perth Amboy, NJ 08861. The item “AL-310S 450lbs Torque X-AXIS Power Feed Milling Machine 110V 0-200RPM 5/8 Shaft” is in sale since Wednesday, August 14, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “believehappysale9″ and is located in Perth Amboy, New Jersey. This item can be shipped to United States, Canada, Mexico.

• Brand: VEVOR
• MPN: REWLK006
• Model: AL-310S
• Power Source: Electric
• Voltage: 110V, 50/60Hz
• Control: Manual
• Function: Milling
• Machine Type: Milling Machine
• Rotate speed: 0-200 RPM
• Max torque: 450 in-lb
• Max feed rate: 650mm/min
• Max return speed: 850mm/min
• Dimension: 8 x 4.5 x 13 inches
• Gross weight: 16.5 lbs