THE MODEL NUMBER PLATE IS MISSING. THE BELT GUARDS AND GREASE GUARD PAN ARE MISSING. THE MOTOR IS 110V, 1/2HP, 1740RPM. THE BELTS ARE WORN. THE CLAPPER DOES NOT HAVE ANY CRACKS OR WELDS. THE BALL CRANK FOR THE CLAPPER IS BROKEN. THE DRIVE TRAIN PULLEY HAS A CHIP ON THE SMALL STEP (IT DOES NOT CAUSE A PROBLEM). THE POWER CORD IS WORN AND A 2 PRONG CORD. IT SHOULD BE CHANGED TO A 3 PRONG. THE SHAPER RUNS AND THE TABLE MOVES RIGHT AND TO THE LEFT. THERE ARE SCUFFS, SCRATCHES AND WEAR FROM USE. THE SHAPER SHOULD BE CLEANED AND LUBRICATED. LOOK AT THE PICTURES. IF YOU HAVE ANY QUESTIONS, PLEASE ASK BEFORE THE END OF THE LISTING. NO WARRANTIES GIVEN OR IMPLIED. ALL ITEMS MUST BE PAID FOR WITHIN 5 DAYS FROM THE END OF THE LISTING. NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. International Buyers Please Note. I do not mark merchandise values below value or mark items as “gifts” – US and International government regulations prohibit such behavior. C IS A 1 PERSON COMPANY SPECIALIZING IN VINTAGE PORTER CABLE, DELTA, POWERMATIC, ATLAS AND WALKER TURNER TOOLS. I MAKE SURE EVERYTHING IS LISTED AS ACCURATELY AS POSSIBLE. The free listing tool. The item “ATLAS METAL SHAPER MACHINING METAL WORKING MACHINIST TOOL” is in sale since Saturday, December 29, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “h.resale_llc” and is located in Waterford, Michigan. This item can’t be shipped, the buyer must pick up the item.

• Brand: Atlas

THE MODEL NUMBER PLATE IS MISSING. THE BELT GUARDS AND GREASE GUARD PAN ARE MISSING. THE MOTOR IS 110V, 1/2HP, 1740RPM. THE BELTS ARE WORN. THE CLAPPER DOES NOT HAVE ANY CRACKS OR WELDS. THE BALL CRANK FOR THE CLAPPER IS BROKEN. THE DRIVE TRAIN PULLEY HAS A CHIP ON THE SMALL STEP (IT DOES NOT CAUSE A PROBLEM). THE POWER CORD IS WORN AND A 2 PRONG CORD. IT SHOULD BE CHANGED TO A 3 PRONG. THE SHAPER RUNS AND THE TABLE MOVES RIGHT AND TO THE LEFT. THERE ARE SCUFFS, SCRATCHES AND WEAR FROM USE. THE SHAPER SHOULD BE CLEANED AND LUBRICATED. LOOK AT THE PICTURES. IF YOU HAVE ANY QUESTIONS, PLEASE ASK BEFORE THE END OF THE LISTING. NO WARRANTIES GIVEN OR IMPLIED. ALL ITEMS MUST BE PAID FOR WITHIN 5 DAYS FROM THE END OF THE LISTING. NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. International Buyers Please Note. I do not mark merchandise values below value or mark items as “gifts” – US and International government regulations prohibit such behavior. C IS A 1 PERSON COMPANY SPECIALIZING IN VINTAGE PORTER CABLE, DELTA, POWERMATIC, ATLAS AND WALKER TURNER TOOLS. I MAKE SURE EVERYTHING IS LISTED AS ACCURATELY AS POSSIBLE. The free listing tool. The item “ATLAS METAL SHAPER MACHINING METAL WORKING MACHINIST TOOL” is in sale since Friday, November 30, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “h.resale_llc” and is located in Waterford, Michigan. This item can’t be shipped, the buyer must pick up the item.

• Brand: Atlas

Atlas horizontal milling machine in very good working condition, the machine base one corner broke, look on the pictures. What you see on the pictures is everything that I got. The item “Atlas horizontal milling machine” is in sale since Friday, November 16, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “jimi3377″ and is located in Greenfield, Indiana. This item can’t be shipped, the buyer must pick up the item.

• Brand: Atlas
• Model: mfc
• Non-Domestic Product: No
• Country/Region of Manufacture: United States
• MPN: Does Not Apply

New LEDOM ENGINEERING LLC. Vertical milling attachment for the Atlas horizontal Milling Machine. If you have any questions please feel free to contact me. 500 wall steel headstock. 6061 Aluminum bearing covers. Maurey CNC machined steel pulleys (4) CNC machined 4140 steel water quenched spindle. 1/2″ spindle hole for all 1/2″ shank tooling. Milling cutters, fly cutters, Jacobs chucks, etc… Tig welded in a precision jig. Witness plate on side of headstock is precision ground along the spindle axis. The item “Atlas milling machine vertical milling attachment” is in sale since Friday, November 2, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “machinetoolnut” and is located in Lawrence, Kansas. This item can be shipped to United States.

• Brand: Ledom Engineering LLC.
• Model: LE500

THE MODEL NUMBER PLATE IS MISSING. THE BELT GUARDS AND GREASE GUARD PAN ARE MISSING. THE MOTOR IS 110V, 1/2HP, 1740RPM. THE BELTS ARE WORN. THE CLAPPER DOES NOT HAVE ANY CRACKS OR WELDS. THE BALL CRANK FOR THE CLAPPER IS BROKEN. THE DRIVE TRAIN PULLEY HAS A CHIP ON THE SMALL STEP (IT DOES NOT CAUSE A PROBLEM). THE POWER CORD IS WORN AND A 2 PRONG CORD. IT SHOULD BE CHANGED TO A 3 PRONG. THE SHAPER RUNS AND THE TABLE MOVES RIGHT AND TO THE LEFT. THERE ARE SCUFFS, SCRATCHES AND WEAR FROM USE. THE SHAPER SHOULD BE CLEANED AND LUBRICATED. LOOK AT THE PICTURES. IF YOU HAVE ANY QUESTIONS, PLEASE ASK BEFORE THE END OF THE LISTING. NO WARRANTIES GIVEN OR IMPLIED. ALL ITEMS MUST BE PAID FOR WITHIN 5 DAYS FROM THE END OF THE LISTING. NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. International Buyers Please Note. I do not mark merchandise values below value or mark items as “gifts” – US and International government regulations prohibit such behavior. C IS A 1 PERSON COMPANY SPECIALIZING IN VINTAGE PORTER CABLE, DELTA, POWERMATIC, ATLAS AND WALKER TURNER TOOLS. I MAKE SURE EVERYTHING IS LISTED AS ACCURATELY AS POSSIBLE. The free listing tool. The item “ATLAS METAL SHAPER MACHINING METAL WORKING MACHINIST TOOL” is in sale since Wednesday, October 31, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “h.resale_llc” and is located in Waterford, Michigan. This item can’t be shipped, the buyer must pick up the item.

• Brand: Atlas

New LEDOM ENGINEERING LLC. Vertical milling attachment for the Atlas horizontal Milling Machine. If you have any questions please feel free to contact me. 500 wall steel headstock. 6061 Aluminum bearing covers. Maurey CNC machined steel pulleys (4) CNC machined 4140 steel water quenched spindle. 1/2″ spindle hole for all 1/2″ shank tooling. Milling cutters, fly cutters, Jacobs chucks, etc… Tig welded in a precision jig. Witness plate on side of headstock precision ground along spindle axis. The item “Atlas milling machine vertical milling attachment” is in sale since Thursday, September 27, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “machinetoolnut” and is located in Lawrence, Kansas. This item can be shipped to United States.

• Brand: Ledom Engineering LLC.
• Model: LE500

Recent searches

• atlas vertical milling attachment

ATLAS 7B METAL SHAPER FEED RATCHET GEAR COVER CASE S7-23D REPLACEMENT. We have been asked a couple different times to produce these S7-23D covers and have finally found some time. This is a replacement ratchet gear cover for a 7B Atlas Metal Shaper. This is 3D printed in a tough durable plastic material that is not affected by solvents or oils. Comes with the center bronze bushing installed and drilled with the oil hole. This replaces the Zamak produced covers that were very prone to cracking. A couple pictures show the cams in place in the cover. The cams are not included in the sale, only the cover nor is the shaper in the pictures. When we installed this we did not install the small spring and ball detent and had no problems regarding function or the unit staying in directional mode. I suggest not installing these as they are hard to install and like I mentioned really do not affect function as the internal plunger is an over center mechanism that keeps it in the correct mode. We produce and sell only high quality FDM printed (3D printed) items and we do custom work as well, so if you have a project, let us know. Atlas 7B Metal Shaper Ratchet S7-23 Cover 3D Printed Replacement – YouTube. Video will open in a new window. The item “ATLAS 7B METAL SHAPER FEED RATCHET GEAR COVER CASE S7-23D REPLACEMENT 3D PRINTED” is in sale since Wednesday, March 21, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “fdmprinters” and is located in Ionia, Iowa. This item can be shipped to United States.

• Model: 7B
• Country/Region of Manufacture: United States
• MPN: Does Not Apply
• Brand: ATLAS

I do have the original vise, but it is cracked for warning. It does have power feed!!! Comes with a tool post and a few tools holders. I also have a video will send upon request. The item “AMMCO metal shaper south bend logan atlas machinist milling READ DESCRIPTION” is in sale since Saturday, September 22, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “daughty70″ and is located in Heyworth, Illinois. This item can be shipped to United States.

• Brand: AMMCO

Original ATLAS SHAPER Vise S7-92A. Please see all pictures. In very good used condition. The item “Original ATLAS SHAPER Vise S7-92A / S7-92 A” is in sale since Saturday, September 1, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “mrsmith1017″ and is located in Middleport, New York. This item can be shipped to United States.

• Brand: ATLAS
• Country/Region of Manufacture: United States

Excellent Atlas Index Centers for Atlas 7 Metal Shaper. This indexing pin is missing and the spindle is very stiff from many decades of storage, the crank does not turn easily.. The unit needs a good cleaning and lubrication. These are considered the rarest of Atlas shaper accessories From Original Brochure for the Atlas 7 Shaper: For dividing operations requires in splining, fluting, gear cutting and squaring shafts. Heavy base casting is held to T-slots in shaper by cap screws – support for inner center is cast with base. Outer Center support may be positioned for work up to 8 inches long. Screw with ball crank operates adjustable center. Spindle is locked in position by coordinate clamp. SPECIFICATIONS: 8″ maximum distance between centers, maximum swing 5-1/2″, base 14-1/4″ x 6″ x 7/8 thick. This sale is for Excellent Atlas Index Centers for Atlas 7 Metal Shaper. This indexing pin is missing and the spindle is very stiff from many decades of storage, the crank does not turn easily. These are considered the rarest of Atlas shaper accessories. Please see further pictures below the description. From Original Brochure for the Atlas 7 Shaper: For dividing operations requires in splining, fluting, gear cutting and squaring shafts. A scale shown is for size reference only and not part of the sale. Thank you for looking Please check my other auctions of precision watchmakers, machinists tools and other unique items. All items are described to the best of my ability and questions are encouraged. I have No way to know when and if these charges will be applied. It is understood that by purchasing any item the purchaser assumes all liability and holds harmless and indemnifies JSR & Father Industrial Machinery & Supplies Inc. And its directors against any damage or penalties associated with: 1. Compliance to current or future laws, rules or regulations pertaining to the use or possession of any equipment device or components, 2. Any property damage caused directly or indirectly by the use, operation or possession of any equipment, device or component. Machine Safety: it is the user’s responsibility to provide proper safety devices and equipment to safeguard the operator from harm for any particular use, operation or setup, and to adequately safeguard the machine, or machines, to conform to all Federal, State and Local Government Safety Standards and All Industry Safety Standards. Get images that make Supersized seem small. Track Page Views With. Auctiva’s FREE Counter. The item “RARE Atlas Index Centers Dividing Head for Atlas 7 Metal Shaper” is in sale since Monday, August 20, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “jrwoodca” and is located in Perth, Ontario. This item can be shipped to United States, Canada.