Atlas milling machine on its own stand. The item “Atlas MFC Milling Machine” is in sale since Saturday, August 12, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “57tbirdpat” and is located in Valley Center, California. This item can’t be shipped, the buyer must pick up the item.
Comments Off
Tested working Atlas horizontal milling machine in used condition. This is a nice compact bench top milling machine typically used by gunsmiths, model engine and train enthusiasts, hobby/home machinist, and sometimes found in machine shops being use as a keyway cutting machine. These machines work great for what they were intended to do, and as long as you do not need something in a hurry and try to overwork it, it should last a long while. The previous owner painted it a green color and that paint is flaking off, leaving behind some of the original grey. Comes with 7/8 arbor, small vise, and a few cutters. I have owned a few of these over the years and used this mill for about 4 hours and just want to be thorough in my listing and tell you everything that I noticed, I may not have seen everything but I did do a somewhat thorough investigation into its condition. The side belt cover is there but the swivel ears are repaired and may continue to hold but they may not. The side belt cover needs to have a latch of some sort as it will move in towards the belt during operation. The top belt cover has a crack at the one corner, it does not seem to affect anything but want to tell you it’s there. The powerfeed direction lever was repaired at some point and worked as it should while I was using it. The feeds do have some play as with most of these mills you will find. The drawbar is not original but seems to work like it should. The mid plate has a broken corner(see one of the pics with finger pointing). There are a couple knobs/handles that have been replaced by a shop found item. One feed handle is broken off (motor side). It ran like it should and cut as good as I would expect for the capabilities of a machine this size. If you have any questions please shoot me a message, just do not wait until last minute and expect me to get back to you in time. This item is for sale locally and I reserve the right to cancel this listing at any time. The item “Atlas MFC Mill Horizontal Milling Machine Machinist Tool Bench Top” is in sale since Thursday, August 10, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “zwmcquig” and is located in Yorktown, Virginia. This item can be shipped to United States.
Comments Off
Standard atlas milling machine, with a few modifications. Original lever feed on the x axis is now fed by a screw which has quite a bit of backlash in it at this point. Motor is running and wiring is in good shape. Comes with heavy duty stand that is heavier than the mill itself. Also comes with all the cutters pictured, the 1 arbor and all its spacers, and a full set of mt2 collets. Would be a great restoration project or could probably be run as is. Looking to sell, make a reasonable offer! The item “Atlas Horizontal Milling Machine And Cutters” is in sale since Friday, August 11, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “us2015_zwall” and is located in Denver, Pennsylvania. This item can be shipped to United States.
Comments Off
2 Atlas Benchtop Horizontal Mills. Great for watchmakers or gunsmiths! 1 working, 1 spare parts machine. The working machine is 100% and all knobs turn freely and all ways are tight. Comes with nice vintage wooden bench cabinet and some cutters. This machine was previously owned by Frank Messenger, the legendary machinist/millright of Allison Transmission in Indianapolis, so its been taken great care of. Spare machine is missing motor and mount (same as when I bought it). I used this machine for slotting bicycle tubes for dropouts. At best, the machine was used for 20 minutes a week while in my shop. The item “Atlas Bench Top Horizontal Milling Machines (Watchmakers, gunsmiths)” is in sale since Friday, July 28, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “donwalkercycles” and is located in Buckner, Kentucky. This item can’t be shipped, the buyer must pick up the item.
Comments Off
Tested working Atlas horizontal milling machine in used condition. This is a nice compact bench top milling machine typically used by gunsmiths, model engine and train enthusiasts, hobby/home machinist, and sometimes found in machine shops being use as a keyway cutting machine. These machines work great for what they were intended to do, and as long as you do not need something in a hurry and try to overwork it, it should last a long while. The previous owner painted it a green color and that paint is flaking off, leaving behind some of the original grey. Comes with 7/8 arbor, small vise, and a few cutters. I have owned a few of these over the years and used this mill for about 4 hours and just want to be thorough in my listing and tell you everything that I noticed, I may not have seen everything but I did do a somewhat thorough investigation into its condition. The side belt cover is there but the swivel ears are repaired and may continue to hold but they may not. The side belt cover needs to have a latch of some sort as it will move in towards the belt during operation. The top belt cover has a crack at the one corner, it does not seem to affect anything but want to tell you it’s there. The powerfeed direction lever was repaired at some point and worked as it should while I was using it. The feeds do have some play as with most of these mills you will find. The drawbar is not original but seems to work like it should. The mid plate has a broken corner(see one of the pics with finger pointing). There are a couple knobs/handles that have been replaced by a shop found item. One feed handle is broken off (motor side). It ran like it should and cut as good as I would expect for the capabilities of a machine this size. If you have any questions please shoot me a message, just do not wait until last minute and expect me to get back to you in time. This item is for sale locally and I reserve the right to cancel this listing at any time. The item “Atlas MFC Mill Horizontal Milling Machine Machinist Tool Bench Top” is in sale since Monday, July 10, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “zwmcquig” and is located in Yorktown, Virginia. This item can be shipped to United States.
Comments Off
Atlas M1-61 Support Bar. Came from a lot of NOS Atlas parts I acquired. The guy wanted to convert his Atlas horizontal mill to have the extra support capability of the MFC model. See my other auctions for more rare NOS Atlas MFC horizontal milling machine parts! The item “Rare M1-61 Arbor Support Bar for Atlas milling machine MFC” is in sale since Saturday, April 22, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “toycap” and is located in North Royalton, Ohio. This item can be shipped to United States.
Comments Off
Atlas Milling Machine / Horizontal Bench Miller. The item “Atlas Milling Machine / Horizontal Bench Miller” is in sale since Saturday, April 08, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “shepsmachineandspeed” and is located in Bozrah, Connecticut. This item can’t be shipped, the buyer must pick up the item.
Comments Off
ATLAS MF VERTICAL MILLING MACHINE MACHINIST TOOL 115V INDUSTRIAL. We have included the original motor but it’s not attached to the unit. Unit needs motor replacement so it can operate. We recommend Freightquote or the. We do not charge for loading. Unit will be shrink wrapped in cardboard and steel banded to pallet. Approximate Dimension: 4′W x 4′L x 58H. Approximate Weight: 350 lbs. Comes as shown in photos. Unit is in good condition. Unless stated otherwise in the description, all merchandise is GUARANTEED to be as described and to be in working order upon arrival. Check out the photos provided, thank you for looking and Good Luck! Item may be picked up from our location. Thank you for your business. The item “ATLAS MF VERTICAL MILLING MACHINE MACHINIST TOOL 115V INDUSTRIAL” is in sale since Monday, April 10, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “sunrisesurplusinc” and is located in Chatsworth, California. This item can be shipped to United States, Canada.
Comments Off
It is in great working condition and hasn’t been used very much. It is mounted and it’s original factory Atlas stand. It includes the original swivel vice and original light too. Comes with the cutter arbor with draw bar and arbor support, a slitting Arbor and two straight shank cutter holders. One cutter holder is 5/8 inch the other is 3/8 inch, plus a boring bar and a slitting saw arbor too. There is also a rotary index table at is an original atlas piece that looks to have been repaired but it’s fully functional and comes with the centering pin, it rotates 360° and indexes every 30° with the pin. Everything pictured table is included. The item “Atlas MFB Horizontal Milling Machine With Original Stand Vice and Tooling” is in sale since Sunday, April 02, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “toycap” and is located in North Royalton, Ohio. This item can’t be shipped, the buyer must pick up the item.
Comments Off
Atlas Horizontal Mill, Planer. Everything in the pics for this Mill is included. Original Atlas electric motor as well. Comes mounted on wooden table. The item “Atlas Horizontal Mill Milling Shaper Planer” is in sale since Tuesday, March 21, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “04factorytuono” and is located in Canton, Michigan. This item can’t be shipped, the buyer must pick up the item.
Comments Off
