Doosan DNM 4500 VMC, 2019 – Renishaw, 4th Axis Capable, 12,000rpm, 30ATC, CAT 40 spindle. Under 86hrs of run time! Only machined Copper/ Aluminum material. Synthetic Coolant Used by Quaker/Houghton HOCUT WS8065. Renishaw Optical tool Setter and table mount with Cat-40 T/S Calibration Master. 8 – CAT40 for ER32 Tool Holders & 1- CAT40 ER25 Holder with pull studs. Henning Right Side Chip Conveyor with a 2 stage chip filter for coolant tank and Oil Skimmer. Machine is lubricated by a Auto Grease cartridge System (3/4 of the cartridge is Left for use). Thu-Spindle coolant & 3 Flood Coolant nozzles. 100 Gallon Coolant Tank. Hand Held Operator (Magnetic base) It can be placed any where on machine for easy vise/fixture set ups. Operators Keys for CNC controller. Table size : 450 mm x 980 mm or 17 3/4in x 38in. Rapid G00 speed up to 1400 IN per MIN. Easy access to machine and over head door. Door is 12ft wide x 13ft tall. The item “Doosan DNM 4500 VMC, 2019 TSC, Renishaw, 4th Axis, 12,000rpm, 30ATC” is in sale since Wednesday, August 26, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “smtw2018″ and is located in North Vernon, Indiana. This item can be shipped to United States.

• Brand: Doosan
• Model Year: 2019
• Machine Type: Vertical Milling Machine
• X-Axis Travel Bed: 36 in – 40 in
• Max Spindle Speed (RPM): 10001 – 15000
• Function: Milling
• Voltage: 230 V
• Table Length: 35 in – 39.9 in
• Z-Axis Travel Bed: 16 in – 20 in
• Y-Axis Travel Bed: 16 in – 20 in
• Table Width: 15 in – 19.9 in
• Spindle Taper: CAT 40
• Spindle Horsepower: 25 hp
• Control: CNC

DYNA MYTE 3 Axis Vertical Machining Center. Needs drive board repaired , ran great until board went out. We need the room 16 station umbrella tool changer, rigid taping , meldas control. Good little machine, must have your own riggers. We do not load! The item “DYNA MYTE 3 Axis Vertical Machining Center” is in sale since Wednesday, February 3, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “wvmfgsolutions” and is located in Montgomery, West Virginia. This item can’t be shipped, the buyer must pick up the item.

• Spindle Horsepower: 20 hp
• Machine Type: Machining Center
• Max Spindle Speed (RPM): 4501 – 5000
• Power Source: Electric
• X-Axis Travel Bed: 16 in – 20 in
• Y-Axis Travel Bed: 16 in – 20 in
• Z-Axis Travel Bed: 16 in – 20 in
• Spindle Taper: CAT 40
• Function: Drilling
• Brand: DYNO MYTE
• Control: CNC
• Voltage: 220 V

The machine is used for X axis, if you want to used for Y axis, a SUPPORT PLATE will be needed. Our Brand New AS-250-150 X-Axis Power Feed Kit is for Bridgeport and Similar Knee Type Milling Machines. These will fit almost any vertical knee type mill out there with the 5/8 Shaft End, Including but not limited to Bridgeport, Precision Matthews, Grizzly, Enco, Jet, Sharp, Acer, Webb, GMC, Kent, Clark, Supermax, Enco, Turn Pro, Vectrax, Acra, Birmingham, Accu, First… The gear ratio between transmission plastic gear and motor shaft gear is not a whole number. The two gears will not mesh and wear at the same spot, this not only increases durability and longevity but even reduces noise over time. Speed can be adjust according to operator’s requirement, ranging from 0-9. Normally, jog switch should be at “FEED” position. For jog movement, just switch to “0″ position. Kept holding the switch until it travels to requires position. Be sure to follow the procedure for jog operation to avoid any damage caused by wrong movement. Make sure the power feed stops before you change the direction. The switch should be in the “OFF” position when the machine is not in use or before plugging. Gear cover must be open every 6 month to check whether lubrication for spiral gear is sufficient. Graphite type lubrication is suggested rather than silicon type. Carbon brush cap should be open every 6 month to check if the brush has wore out. Brush should be replace immediately if its length is under 5mm (front and back brush should be replaced together). Voltage : 110 V, 60 Hz. Rotate speed : 0-200 rpm. Length : 33 cm (13 inch). Width : 20 cm (7.9 inch). Height : 18 cm (7 inch). Gross weight : 6.5 kg(14.3 lb). 1 x AS-250-150 X-Axis Power Feed for Milling Machine. 1 x Set of Necessary Accessories. 1 x Product Manual. X-axis power feed for Bridgeport type milling machines. Reversible and auto shut-off at end of cut. Limit switch for sensitive stop. No loss of dial or hand crank. Small volume and easy installation. Excellent speed control in the entire range. Power table feed won’t vibrate or strain in low speed. Direction control knob for easy and rapid operation. Safety feature to protect transmission gear and electronic components. Please contact our customer service team immediately if. You changed your mind and wish to request a return. Your product was damaged during transit. Please do not return or post items before obtaining instructions from us. This also applies to orders cancelled while in transit. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. We will require a picture of the damaged part for verification. We seeks to sell the greatest value products on the market. These items should be of an acceptable quality, fit for purpose, and matching their description. We have a highly experienced engineering and technical team who specialise in researching and developing all our products. We benchmark our products against high standards and that¡¯s why our customers keep coming back. The item “AS-250 X AXIS POWER FEED KNEE MILLS FOR BRIDGEPORT MILLING MACHINE 0-200 RPM” is in sale since Friday, March 5, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “vipshopmarket” and is located in Westbury, New York. This item can be shipped to United States.

• Voltage: 110V
• Rotate speed: 0-200 RPM
• Torque: 150 lbs
• Package size: 13″x8″x7″
• Gross weight: 6.5 kg(14.3 lb)
• Warranty: 5 Years
• Function: Milling
• Machine Type: Milling Machine
• Power Source: Electric
• Control: Manual
• Brand: VEVOR
• Model: AS-250-150
• MPN: ZCXZG0085

HERE IS A NICE WILLEMIN W-138 CNC MILL. THIS MACHINE WAS USED FOR MEDICAL MANUFACTURING AND WAS VERY WELL MAINTAINED. I HAVE LOTS OF SPARE PARTS, MANUALS ETC. I ALSO HAVE A SECOND MACHINE AVAILABLE AS WELL IF YOU ARE INTERESTED , THAT MACHINE IS A LITTLE OLDER. MACHINE HAS A FUME EXTRACTOR AND A TRANSFORMER MOUNTED ON TOP FOR WHAT I THINK IS 460 VOLT 3 PH. The item “WILLEMIN W-138 CNC MILLING MACHINE, MULTI AXIS, TOOLING AND SPARES VERY GD COND” is in sale since Monday, September 21, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “a-z-surplus-ny” and is located in South Glens Falls, New York. This item can be shipped to United States.

• Machine Type: Milling Machine
• Model Year: 1997
• Function: Drilling
• Brand: WILLEMIN
• Control: CNC

A business is simply an idea to make other people lives better , Here in Panacea we work hard every day to create your lives more easier & better. Two and three axis lathe Milling machine lcd cnc DRO Linear scale digital display electronic gate optical size digital display. Two axis package (with two linear grating rulers and one two axis digital display dro measuring range of 50-1000mm, two grating rulers are optional). Three axis package (with three linear grating rulers, one set of three-axis digital display dro measuring range of 50-1000mm, three grating rulers of any choice). Two axis VIP package (with two linear grating rulers and one two axis LCD large screen dro measuring range of 50-1000mm, two grating rulers can be selected arbitrarily). Three axis VIP package (with three linear grating rulers, one set of three-axis LCD large screen dro measurement range of 50-1000mm, three grating rulers are optional). The digital display dro defaults to the English language input voltage of 80-260v. Linear grating ruler default resolution 5um (0.005mm) DC5V cable length 3M. Linear scale / encoder / sensor, they are respectively 50mm, 100mm, 150mm, 200mm, 250mm, 300mm, 350mm, 400mm, 450mm, 500mm, 550mm, 600mm, 650mm, mm, 700mm, 750mm, 800mm, 850mm, 900mm, 950mm, 1000mm. Remember that the so-called linear grating length refers to the effective measurement distance and not the total length! For example, a 450mm linear grating ruler has a total length of 590mm! We hope you can find out. This is a complete drive set, and you will be sent what you need. Dro display system parameters. Voltage range: AC 80 V 264 V / 50 Hz 60 Hz. Acceptable signal: square wave TTL. Acceptable resolution: 10um, 5um, 2um, 1um, 0.5 M. Dro function display system. 3: Mm / in mode. 4: ABS / Inc coordinate conversion. 5: 200 groups under reference value. 6: Power off memory. 7: Center 1 / 2. 8: Coating error compensation. 10: Delete 200 to define SDM standard. 11: ABS / Inc mode. Borehole 14: diagonal borehole. Machining arc of machining 16. 17: Rotation (matching) function. 18: Progressive rectangular lumen processing. 21: daimater / Department. It has complete functions and can be widely used in milling machine, lathe, drilling machine, reaming, wire cutting and EDM machine tools. Ac80-260v wide voltage can be used worldwide. We provide different Au plugs. Adapt to your standards. It can match all linear scales of China, China, Youli, Easson, hxx and Chinese brands, which is very easy to operate. Digital dro supports Chinese and English. The item “Digital LCD2 &3 Axis Milling Machine With CNC DRO Linear Scale Lathe Machine” is in sale since Monday, July 27, 2020. This item is in the category “Business, Office & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “muhara_86″ and is located in Shanghai. This item can be shipped worldwide.

• Country/Region of Manufacture: China
• Machine Type: milling machine
• MPN: Does Not Apply
• Function: Milling
• Control: CNC
• Voltage: 110.260 V

Bridgeport EZ TRAK DX Vertical Milling Machine w/2 Axis EZTRAK CNC Control. Z Axis Digital ReadOut. Model: Series 1 EZ TRAK DX. Serial: BR 271298 E. Table Size: 48″ X 9″. Max X-Axis Travel: 36. Max Y-Axis Travel: 12. Max Z-Axis Travel: 5 (Quill). Spindle Rpm Ranges: 60-4200 Rpm (Variable). With Kurt 6 Vise and 23 R 8 Collets. This Came From Local Manufacturers Tool Room and Was Working When We Got it. We Do Not Have 480 Volt Power or a Transformer to Put Power to This. The Wiring Should Be Checked Prior to Powering this up. I had Someone Starting to Convert to 230 V So I could Use It but Not Sure What He. Ended up With a Br. Idgeport SX CNC so did not Need this. For Free at Our Warehouse. Business with Dock or Fork Truck. Zip Code & City. The item “Bridgeport EZ TRAK DX Vertical Milling Machine with2 Axis EZTRAK CNC Control” is in sale since Thursday, October 1, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “bratex_llc” and is located in Johnson City, New York. This item can be shipped worldwide.

• Model: EZ TRAK DX
• Modified Item: No
• Spindle Horsepower: 2 hp
• Country/Region of Manufacture: United States
• Custom Bundle: No
• Machine Type: Vertical Milling Machine, CNC
• Table Length: 48
• Max Spindle Speed (RPM): 4200
• Power Source: Electric
• X-Axis Travel Bed: 36
• Y-Axis Travel Bed: 12
• Z-Axis Travel Bed: 5
• Spindle Taper: R-8
• Type: CNC, Vertical
• Function: Drilling
• Control Type: EZTRAK
• Catagory: Milling Machine, Vertical, CNC
• Make: Bridgeport EZ TRAK DX
• Brand: Bridgeport
• Table Width: 9
• Control: CNC
• Voltage: 480 V

Tree Journeyman 210 Mill Vertical Milling Machine 44 table Axis AS IS. Many of the electrical wiring has been disconnected and the CNC part of it is missing some boards. It is also missing the shaft that turns the collet spindle and the hand lever that moves the table from side to side is broken. However we did apply power to all the motors and they all do work. The main motor and the up/down travel motor both work on 230V, 3 phase. The manual handle on the up/down travel does work. On the right/left and forward/back travels the motor are both DC servo/stepper motors and require the correct drive. I ran them with my DC controller and they run in both directions but they move with a step or stutter. There is also a coolant pump inside that you can hear running, but we did not test to see if it pumps. The table is 44 wide. We warrantee and represent that the goods are as described in the above listing. We pride ourselves on our customer service. You may also be interested in…. View more great items. Template by Froo Apps. The item “Tree Journeyman 210 Mill Vertical Milling Machine 44 table Axis AS IS” is in sale since Friday, March 12, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “baylinetool” and is located in Hayward, California. This item can be shipped to United States.

• Machine Type: Vertical Milling Machine
• Function: Milling
• Brand: Tree

8 NIKKEN 4th AXIS CNC ROTARY TABLE CNC Z200LZA CNCZ200 LZA S/N 8021 FOR SIEMENS. MOTOR FOR SIEMENS CONTROLLER. ON PALLET: 260LBS 40X30X22. WE CAN PALLETIZE AND LOAD FOR FREE. SEARCH SMS ENGINEERING 8O544373OO. The item “8 NIKKEN 4th AXIS CNC ROTARY TABLE CNC Z200LZA CNCZ200 LZA S/N 8021 FOR SIEMENS” is in sale since Wednesday, September 18, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “eskridgegoat” and is located in Oxnard, California. This item can be shipped to United States.

Bridgeport Textron Series 1 CNC Rigid Ram. Bed dimensions are 12.5″ x 34″. Comes with all tooling as shown on the bed with aluminum tool holder. Includes Bridgeport Milling Vise as shown. Comes complete with the following three original manuals shown. Gross Weight of Rigid Ram Machine is 3080 lbs. The item “BRIDGEPORT SERIES 1 CNC VERTICAL MILL MILLING MACHINE 3 AXIS” is in sale since Thursday, May 23, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “islewest” and is located in Westbury, New York. This item can’t be shipped, the buyer must pick up the item.

• Brand: Bridgeport
• Machine Type: Milling Machine
• Country/Region of Manufacture: United States
• MPN: SERIES 1 CNC
• Control: CNC

Tormach 770M Mill, 2018 – RapidTurnTM Chucker Lathe Accessory, 4th Axis, Full En. We are pleased to offer the following for your consideration. Knee Mills – CNC. Y-Axis: 7.5 in. Z-Axis: 13.25 in. Spindle Power: 1.5 hp (1.12 kW). Maximum Speed: 10,000 RPM. X- and Y-Axis: 135 IPM (3.43 m/min). Z-Axis: 110 IPM (2.79 m/min). Power Required Single-Phase: 115 Vac. 50/60 Hz, 15A breaker. Table Size: 26 in. Table Slots: 5/8 in. Spindle Nose to Table Max Clearance: 13.25 in. Spindle Centerline to Machine Column: 8.6 in. Typical System Footprint: 56 in. × 48.5 in. Overall System Height: 88 in. Typical System Weight: 950 lb. Revelation Machinery encourages first-hand inspection of all used machinery. Please verify all of the specs listed for this machine. Listing and template services provided by inkFrog. The item “Tormach 770M Mill, 2018 RapidTurnTM Chucker Lathe Accessory, 4th Axis Capable” is in sale since Tuesday, March 23, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “revelationmachinery” and is located in Bardstown, Kentucky. This item can be shipped to United States.