Pro Touch Off Gage (Model: 04-000). Accurately establishes tool length offsets for CNC milling machines. Large 1 in diameter contact face allows all flutes of the endmill to make contact eliminating issues caused by small variations in flute length. The contact face is lightly spring loaded to protect against overrun. The rectangular base and recessed indicator face allow it to fit between vise jaws on a pair of parallel bars. (competitor models with a round base are unable to do this). Stainless steel contact face. Offset height 4.000 in (101.6mm). Large 2.2 in easy to read indicator face. Easy calibration check using 1-2-3 blocks. Gage graduations 0.001. Gage repeatability 0.0002. Body made from red anodized 6061-T6 aluminum. Padded case and manual included. Pro Touch Off Gage. Set tools accurately with the Pro Touch Off Gage by Edge Technology. Dramatically decrease set up time and eliminate tool path mismatch. The Pro Touch Off Gage allows you to standardize the way tool offsets are measured in your shop, ensuring every job is setup the same way and runs without issue. To use this gage just lower the tool down onto the contact face until the indicator reads zero. At that point you can be confident that the tool tip is exactly 4 inches from the surface the Pro Touch Off Gage is sitting on. Protected by one or more US patents. Please request a package invoice before you pay. Related Products by Edge Technology Products. Please take a moment to check out the other high quality machinist gages and tools that we offer. The item “Pro Touch Off Gage z axis CNC tool length offset setter (1 contact face) #04″ is in sale since Friday, February 14, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “edge_products” and is located in Eagle, Idaho. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Turks and caicos islands, Bangladesh, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Liechtenstein, Luxembourg, Monaco, Macao, Martinique, Nicaragua, Peru, Pakistan, Paraguay, Viet nam, Uruguay, South africa, Colombia, Antigua and barbuda, Saint lucia, Barbados, Bermuda, Cayman islands, Sri lanka, Maldives, Oman, Reunion, Montserrat, Ukraine.

• Model: Pro Touch Off Gage
• MPN: 04-000
• Brand: Edge Technology
• Used With: Haas , Mori Seiki , Mazak , Hurco, ProtoTrak Mills
• Used For: Setting Endmill – Tool Offset Length for CNC Mill

Roland Modela PRO MDX-650A 3D CNC Milling Machine with Automatic Tool Changer and 4th Axis. This Roland Modela PRO MDX-650A 3D Milling Machine has been tested thoroughly in house and is guaranteed to be fully functional. Cosmetically in good overall condition with some signs of use such as scuffs, scratches, blemishes or other cosmetic wear (See Photos). Includes items only as pictured with no other parts, cables or accessories beyond what is listed. See Full Item Description for details. Used – Grade B. 1x: MDX-650A Milling Machine 3x: ZAT-650 Automatic Tool Changer 2x: ZCL-650A Rotary Axis Unit 1x: 7 Tools 1x: Tool Chuck 1x: Clamping Fixture 1x: 20″ x 16″ T-slot Table (world of clamping) 1x: Software Can be programmed with G-Code and compatible with fusion 360. Doing so is against US and international law. Unless otherwise stated above, all auctions include 30 day DOA guarantee. The item “Roland Modela PRO MDX-650A 3D CNC Mill Milling Automatic Tool Changer 4th Axis” is in sale since Thursday, December 3, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “ntc_tech” and is located in Rancho Cordova, California. This item can be shipped to United States.

• MPN: MDX-650A
• Brand: Roland

2004 FADAL VMC 6030 HT VERTICAL CNC MACHINING CENTER. FINANCING AVAILABLE SPECIFICATIONS: Table Working Surface…………………. 62.5″ x 30″ Table Load Capacity…………………….. 3,500 LBS Longitudinal Travel (X-Axis)………….. 60 Cross Travel (Y-Axis)…………………… 30 Vertical Travel (Z-Axis)…………………. 30 Feed Rates (X & Y-Axes)……………… 0.1 to 250 IPM Feed Rate (Z-Axis)………………………. 0.1 to 250 IPM Rapid Traverse Rate (X & Y-Axes)……….. 400 IPM Rapid Traverse Rate (Z-Axis)………………. 400 IPM Tool Storage Capacity…………………………. 20 HP Spindle Speeds Range………………………. 40-10,000 RPM Spindle Taper…………………………………… 240/3/60 Approximate Machine Dimensions…………………… 118″ x 158″ Approximate Machine Height………………………. 119 Approximate Machine Weight………………………. 18,500 LBS EQUIPPED WITH: Fadal CNC Multi Processor Control 4th Axis Ready 4th Axis Rotary Table Rigid Tapping. High Torque Color Monitor 4-Meg Memory Expansion Fadal AC Servo Motors Multiple Part Program Storage, Self Diagnostics, Heavy Duty Box Ways, 21 Station Automatic Tool Changer, Axis Error Compensation, Cutter Compensation, Liquid Cooled Spindle with Chiller, Full Enclosure, Coolant Pump and tank. Please visit us at. SPECIFICATIONS SUBJECT TO VERIFICATION. We take wire transfers, cashiers checks, personal or business checks. Personal or business Checks will take 3 to 5 days to clear. Transit times may vary according to shipper. ENVIANOS UN CORREO PARA COTISACION O SI ESTAS BUSCANDO ALGUNA MAQUINA. The item “2004 Fadal VMC 6030 CNC Vertical Machining Center 4th Axis Rigid Tap 10,000 RPM” is in sale since Monday, April 13, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “gthmach12″ and is located in Pico Rivera, California. This item can be shipped to United States.

• Model: VMC 6030
• Country/Region of Manufacture: United States
• Machine Type: Machining Center
• Model Year: 2004
• Power Source: Electric
• Spindle Taper: CAT 40
• Function: Drilling
• Brand: Fadal
• Control: CNC
• Voltage: 240 V

Appears to be 1996. In excellent working condition and ready for inspection in Allen TX. Under air and power! Comes with fourth axis integrated for full 4 axes machining. Also comes with a USB adaptor for easy G-Code programming. The fourth axis is an HA5C, which receives 5C collets for work holding by the rotary axis. Machine holds excellent tolerances. The item “Haas VF1 CNC with 4TH AXIS INSTALLED- Under Power DFW Area” is in sale since Tuesday, September 1, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “direct-drive-robotics” and is located in Allen, Texas. This item can be shipped to United States.

• Brand: Haas
• Control: CNC

Spindle Nose to Table Top……………………………………………………………………. Used Equipment Sales Contact. To see if you qualify contact Celeste Bozzi. Please verify it’s availability before purchasing! Skidding/Crating of items are extra costs. All items are subject to prior sale. Established 2009, 520 Machinery Sales is a full service machine tool distribution company servicing the Northern Illinois territory for new equipment and across the nation for Used Equipment. We have recently opened a satellite office in Phoenix AZ for Used Equipment sales. 520 Machinery Sales consists of a 30 person team; which includes two office administrators, eight new equipment sales professionals, ten Used Equipment sales professionals, ten Service and Application Engineers including a dedicated Parts Manager. Also, included is an automation specialist for robotics and custom applications. Our service personnel are involved in factory training including both Fanuc and Mitsubishi programming. Our locations include a 10,000 sq. Office and showroom in Schaumburg along with an additional 5,000 sq. Used Equipment Center also located in Schaumburg and a 2000 sq. Sales office in Phoenix. We have been awarded with winning Service and Sales achievements in 2017 and have achieved builder sales quotas in all years since 2010. Product offerings include: Samsung Machine Tools, Muratec Machinery, Tornos, Milltronics Machinery along with various machine tool accessory offerings. Our company mission is to support our customers by providing superior products and services of exceptional value which help them gain competitive advantage in their market. 520 Machinery Sales strives to provide the highest standards of service available through our highly trained sales and service personnel. We provide work environments where our employees can meet their potential and thrive in an atmosphere of excellence. We strive to exceed the industry standard in service to customers while maintaining a superior level of integrity in interactions with business partners and associates. 520 Machinery Sales appreciates our achieved success and conduct our business as model corporate citizens. John Schneider; Co-Owner of 520 Machinery Sales. With 24 years of machine tool sales history and previously worked for family business of a contract machining company. Everett Dahlberg; Co-Owner of 520 Machinery Sales. With over 25 years of sales history with over 20 years of machine tool sales experience. Dave Fahlgren; Co-Owner of 520 Machinery Sales. With 15 years of machine tool sales experience. Wes Kowalczyk: Over twenty years of machine tool sales experience and joined the 520 sales staff in 2011. Mike Land- 30 years of machine tool sales experience and joined the 520 sales staff in 2015. Dan Anderson- 20 years of machine tool sales experience and joined the 520 sales staff in 2019. Brian Doherty- Has ten years of industrial sales experience and joined the 520 sales staff in 2015. In addition to our new sales team, 520 machinery has a 9 person strong used equipment team. The used equipment team helps to generate new equipment sales through various outlets not traditionally used for new equipment. The inside sales role of 520′s used equipment team is something that sets 520 apart from our competition. The used equipment team is as follows. Mark Lipowski- used equipment manager, 20+ years in used equipment sales. Bob Nelson- 20+ years in used equipment sales. Cris Mulvihill- 20+ years in used equipment sales. Jason Stob- 11+ years in used equipment sales. Nate Parker- 10+ years in used equipment sales. Brian Foerster- 5+ years in used equipment sales. Zeno Molteni- 5+ years in used equipment sales. Kurt Dahlberg- 3+ years in used equipment sales. Our company philosophy has and will be to maintain the highest degree of integrity along with a teamwork mentality when working with customers, builders and vendors. We are financially strong and we pride ourselves on our ability of making payments in a timely manner. Data base of northern Illinois territory with Sales Force as the CRM. Aggressive marketing campaigns consisting of cold calling, direct mailings, mass e-mails, websites, trade association involvement and telemarketing. Our used equipment staff has been trained to augment our new equipment sales by offering trade-in programs, often times with other machine tool distributors all across the country. The item “Used 2014 Haas VF-4 CNC Vertical Machining Center Mill 4th Axis Ready Chip Auger” is in sale since Monday, October 26, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “520machinery” and is located in NY. This item can’t be shipped, the buyer must pick up the item.

• Model: VF-4
• Modified Item: No
• Custom Bundle: No
• Machine Type: Machining Center
• Max Spindle Speed (RPM): 8100
• Model Year: 2014
• Power Source: Electric
• Spindle Taper: CT-40
• Non-Domestic Product: No
• Function: Milling
• Type: CNC, Vertical
• Brand: Haas
• Control: CNC

Hitachi Seiki HG400III, Fanuc 15M control. 300 PSI thru coolant. Kitagawa rotary table pictured has been removed and available in a seperate sale. 1 extra pallet has been removed and available in a seperate sale. Chick Vise pictured has been removed and no longer available. Machine was removed from service and power on 8/8/20. The item “Hitachi Selki HG400-3, horizontal mill, 5 axis” is in sale since Wednesday, July 22, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “rptmik” and is located in South El Monte, California. This item can’t be shipped, the buyer must pick up the item.

• Brand: Hitachi Seiki
• X-Axis Travel Bed: 24
• Model: HG400-3
• Machine Type: Horizontal Milling Machine
• Max Spindle Speed (RPM): 12000
• Function: Milling
• Voltage: 220 V
• Z-Axis Travel Bed: 20
• Y-Axis Travel Bed: 22
• Spindle Taper: CAT 40
• Spindle Horsepower: 30 hp
• Power Source: Electric
• Control: CNC

Spindle Needs new Bearings.. X axis needs adjusting. Model: Excel-510 S/N ES 78843 Year 1988 Control Fanuc 0M ATC 16 Tools Spindle Taper: CAT 40. Travel X 20″, Y 16.15″, Z 18.1. Working Area on Table 27.5 – 16.5 Comes with all Manuals. Coolant pump and tanks. Located at Micro Machine Shop in Oakdale, ca. The item “KIWA Excel 510 Milling Center Vertical CNC Mill 3 Axis” is in sale since Thursday, April 9, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “rad_parts” and is located in Oakdale, California. This item can’t be shipped, the buyer must pick up the item.

• Machine Type: Vertical Milling Machine
• Power Source: Electric
• Function: Drilling
• Brand: Excel
• Control: CNC

We have (2) of these machines both in similar condition. You can choose the one you want or both! Both machines are in full working order. Both also have been upgraded to LCD monitors. Very light use especially in the last 10 years. Table Size 50 x 10. T-Slots 63mm x 2 1/2. Footprint of machine 24 x 44. The item “Proto Trak TRM/DPM 3 Axis Milling Machine A. G. E. 3 CNC Controls” is in sale since Monday, June 22, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “corvett1968″ and is located in Tifton, Georgia. This item can’t be shipped, the buyer must pick up the item.

• Model: Trak TRM/DPM
• Spindle Horsepower: 3 hp
• Machine Type: Milling Machine
• Table Length: 40 in – 59.9 in
• Max Spindle Speed (RPM): 3501 – 4000
• Power Source: Electric
• X-Axis Travel Bed: 21 in – 25 in
• Y-Axis Travel Bed: 16 in – 20 in
• Z-Axis Travel Bed: 26 in – 30 in
• Spindle Taper: NST 40
• Function: Drilling
• Brand: Southwestern Trak
• Table Width: 10 in – 14.9 in
• Control: CNC
• Voltage: 220 V

ProCutCNC HD5100G 4′x8′ HD CNC Gantry Router or Plasma Kit, Soft Touch Z Axis. The HD gantry series is the only CNC ganrty in its price range that incorporates a plasma Z axis with a ability to attach a router to it in a matter of minute. Making it one of the most vestal CNC gantry on the market today. Don’t make the mistake and think that all gantries has to “Only” be a plasma gantry! These HD bolt together gantries are a great way to get started on owning your own CNC table. They can be used in may applications. They are capable of doing both plasma cutting and routering. GANTRY SPECIFICATIONS: 1000 ipm Rapid Travel Full 4′x8′ cutting area. Frame 3″x3″ Square 8020 Tubing NEW Y-Axis precision linier rails and bearing cassettes. Gantry “Router Compatible” 2 1/4 HP “Soft Touch” Or “Touch & Go” Z axis (4″ Travel) “Router Compatible 2 1/4 HP Porter-Cable 890 Completely Bolt together. Hardened V-Rail X-axis w/ V-Bearings 3″ 8020 Aluminum Gantry Frame Motor mounts for 4- NEMA23 Stepper Motors (3) Spur Gears (2) 48″ Gear Racks (3) 72″ Gear Racks Bearings “Soft Touch” Or “Touch & Go” Z axis (4″ Travel) “Router Compatible” 2 1/4 HP Porter-Cable 890 Hardware Assembly Instruction “Included”. Motors and Electronics are not included. This product is a built or assembled to order here in the USA. We will try to get the order out before that time. Sorry we do not accept personal checks due to the process of making sure they clear. Most important, we strive to have some of the best prices available and start all auctions as low as we can so that all have a chance to win. ProCutCNC has revolutionized the way hobbyists and fabricators get the job done. We are a great family business who can proudly display Made in the USA on every product. ProCutCNC Division of: Team Moto Inc. Brooklyn Park, MN Product Support: We offer support on our website contact page procutcnc. The item “ProCutCNC HD5100G 4′x8′ HD CNC Gantry Router or Plasma Kit, Soft Touch Z Axis” is in sale since Wednesday, March 27, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Other Metalworking Equipment”. The seller is “jr7k158″ and is located in Minneapolis, Minnesota. This item can be shipped to United States, Philippines, Cayman islands.

• Brand: ProCutCNC
• MPN: GK-4800HD

You may also like. Engraver 4 axis 3040 Router Milling Drilling Carving Cutter Machine 220V 400W EU. Note:We only sell machine without software. This machine needs to be connected to a computer through its controller box with a parallel cable (both included). It is not recommended to connect it to a notebook through a parallel port as the power saving features tend to interrupt the data flow. It is also not recommended to connect it to computers with 64 bit versions of Windows due to problems with the parallel port driver. Notes:Please prepare a computer with DB25 parallel Interface. 1X main unit (Frame). 1X main unit (working base). 1X Sinal cable for A axis. 1X 25pin Parallel lines. 10X 47mm round head. 6X 410mm black Inner six angle screw with nut. 8X 520mm black Inner six angle screw. 4X 58mm Flat Philip’s head screw with nut and gasket. 8X 611mm BALCK FLAT Inner six angle screw. 2X six angle Wrench(3mm). 2X six angle Wrench(4mm). Effective working travel :275(X)mm385(Y)mm57(Z)mm. Work table dimension :320mm530mm. Frame materials: aluminum alloy 6063 and 6061. Leadscrew: 1204 double thread Trapezoidal screws. X axis 1204 trapezoidal screws. Y axis 1204 trapezoidal screws. Z axis 1204 trapezoidal screws. 16mm chrome plate shafts. 12mm chrome plate shafts. Stepping motor type 57 two-phase 1.8A. Spindle motor400w dc motor 5008000PRM/Min. Principal axis collet ER11 / 3.175 mm. Repeat accuracy 0.05mm. Spindle precision radial beat acuities 0.09 mm. Control unittriaxial one-piece drive + ring variable power + PWM speed. Communication interface through parallel connection with computer. Software environment windows XP / win7. Maximum Idle speed:1500mm/min. Working Speed :50-1500mm / min (different material with different speed settings). Operating VoltageAC220V Control unit2.5A stepping motor driver plus adjustable spindle speed controller Computer connectionon board palrallel port Command codeG code ProtectionEmergency stop button. Simple operation and installation. More steady and strong equiped with aluminum alloy frame materials. Can be controlled by computer. Can control the engraving more precise. Large 3D engraving in soft wood, MDF board, native wood, PVC, Acrylic we suggest use one or two spiral flute ball bits. Can engraving much more materails by spiral flute bits, such as metal, steel, MDF board, solid wood, composite board plywood, stone. Spindle motor knob is useful for small positioning adjustment , with steady and strong support structure. Cover plates reducing pollution for the screws and shafts. The reinforced and thickened machine body make transportation absolutely to be safer and longer life time. The chrome shafts is not easy to deform, suitable for long time use. High Precision Stepping motor makes engraving more precise. 3040 is suitble for Industry, Technology Research, Advertising Design, Arts Creation, Teaching. Student Project and Hobby Purposes. 3040 is a desktop machine and designd for processing Industrial or Hobby. Building Model Making, PCB. Adverstising Signs, Artwork, Crafts, Aircraft Models, RC Model parts, etc. So, you can do engraving work at office or home. Exquisite 3040 is a miniature version of mobile longmen structure of carving machine, put on you computer is like. Puting a printer or scanner that coordination, and can completely as a compute peripherals tools, anywhere, anytime. Help you to design intent fast real appear. Nonmetal materials on the milling, and it can also be used to carving simple PCB. This 3040 engraer is a user-friendly desktop engraving machine for those with limited space. And /or a limited budget. The Computerized Engraving and Cutting Machine is suitable for various materials, such as WOOD, PMMA or other plastic MDF board, native wood, PVC, Acrylic, wood, composite board plywood, It can be used widely to process or. Make adverstising signs, PCB. Nameplates, badges, seals, bronzing plate, aluminium alloy, acryplates, ABS resin double color plate, PVC, foaming board, indentation plates, signs. Construction models, instrument panels, wooden products, etc. We promise that every item has been sent. But sometimes there is also 0.3% package lost during transport. Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, Please tell us the problem in details and Please con-tact us within 14 days after you receive the package. We will provide you the best solution for any problem with the item. Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply you-= within 24 hours. If it’s non-workdays, please kindly be patient and wait till Monday. Please feel free to con-tact us if you have any questions. The item “4 AXIS CNC Router 6040 Engraver 400W PCB Metal Wood Cutting Mill Drill Machine” is in sale since Wednesday, February 12, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Woodworking Equipment\Routers”. The seller is “fast-ship-item” and is located in Basel. This item can be shipped to United States, all countries in Europe.

• Marke: Markenlos
• Herstellernummer: nicht zutreffend
• Model: 3040T
• Effective working travel: 275(X)mm*385(Y)mm*57(Z)mm
• Work table dimension: 320mm*530mm
• Max.workpiece dimension: 70mm
• Stepping motor type: 57 two-phase 1.8A
• Spindle motor: 400w dc motor 500~8000PRM/Min
• Principal axis collet: ER11 / 3.175 mm
• Repeat accuracy: 0.05mm
• Spindle precision: radial beat acuities 0.09 mm
• Carving Instructions: G-code/.tab /.nc / .ncc/.txt
• Communication interface: through parallel connection with computer
• Software environment: windows XP / win7
• Machine weight: 28KG
• Computer connection: on board palrallel port
• Protection: Emergency stop button
• Brand: Unbranded
• MPN: Does Not Apply