Good Material: the lathe tool holder is made in mental and not easy to wear, very firm and durable. Usage Characteristics: They have broad utility which are easy to install and operate. 3.100% brand new and high quality. Length: 215mm (8.5). Width: 65mm (2.56). Center height: 67mm (2.6). Travel: 80mm (3.15). Slot height: 22mm (0.87). Handwheel length: 100mm (3.9). Installation hole spacing: 106mm (4.17). Key width: 12mm (0.47). Base width: 106mm (4.17). Total weight: 4.89KG. Width: 80mm (3.14). Center height: 74mm (2.9). Travel: 70mm (2.76). Handwheel length: 122mm (4.8). Disc diameter: 89mm (3.5). Hole spacing: 110mm (4.3). Small aperture: 11mm (0.43). Center height: 76mm (3). Slot height: 16mm (0.87). Handwheel length: 82mm (3.2). Base width: 104mm (4). Length: 235mm (9.25). Width: 67mm (2.6). Center height: 102mm (4). Maximum clamping: 70mm (2.7). Left and right rotation: 60 °. Base width: 111mm (4.4). Installation hole spacing: 114mm (4.5). Positioning key width: 12mm (0.47). Total weight: 6.85KG. 1 Lathe Tool Holder (Depending on your choice). There are NO EXCEPTIONS! OR, you may choose to have a replacement. We will reply you ASAP. Our aim is to provide Top Level Customer Service, normally so we will try our best to solve any problem you have. Our customer-oriented service strives for. Business time: GMT8 (9:00-18:00) from Monday to Friday.

Good Material: the lathe tool holder is made in mental and not easy to wear, very firm and durable. Usage Characteristics: They have broad utility which are easy to install and operate. 3.100% brand new and high quality. Length: 215mm (8.5). Width: 65mm (2.56). Center height: 67mm (2.6). Travel: 80mm (3.15). Slot height: 22mm (0.87). Handwheel length: 100mm (3.9). Installation hole spacing: 106mm (4.17). Key width: 12mm (0.47). Base width: 106mm (4.17). Total weight: 4.89KG. Width: 80mm (3.14). Center height: 74mm (2.9). Travel: 70mm (2.76). Handwheel length: 122mm (4.8). Disc diameter: 89mm (3.5). Hole spacing: 110mm (4.3). Small aperture: 11mm (0.43). Center height: 76mm (3). Slot height: 16mm (0.87). Handwheel length: 82mm (3.2). Base width: 104mm (4). Length: 235mm (9.25). Width: 67mm (2.6). Center height: 102mm (4). Maximum clamping: 70mm (2.7). Left and right rotation: 60 °. Base width: 111mm (4.4). Installation hole spacing: 114mm (4.5). Positioning key width: 12mm (0.47). Total weight: 6.85KG. 1 Lathe Tool Holder (Depending on your choice). There are NO EXCEPTIONS! OR, you may choose to have a replacement. We will reply you ASAP. Our aim is to provide Top Level Customer Service, normally so we will try our best to solve any problem you have. Our customer-oriented service strives for. Business time: GMT8 (9:00-18:00) from Monday to Friday.

Please call with any questions. We will assist you in any reasonable way to help get your items to your destination, All checks subject to bank verification. Please Call: Two Zero T hree, Five Nine Two, Eight Four Zero Two, with any questions or concerns, Thank You! You are welcome to inspect any machine by appointment. Guerrera Machine Company, LLC. Will not be held liable for any inaccurate information.

In good working condition, but has scratches, signs of use and surface marks.

To obtain hobby machines, I travel regularly through out the Midwest, South and Eastern United States from my residence near Toledo, Ohio. It’s cheaper but it ain’t free. I do not deliver to Canada. I MIGHT BE ABLE TO DELIVER YOUR ORDER FOR LESS……… Emco_Hobby_Shoppe Listing Banner Revised 03/15/2023. Dorian, made in USA, Your lathe must have 4 long bolt to secure this tool post. Good or better cosmetic condition. Some tool marks from light use. Xidation and oil stains from sitting unused for ages. Listing Data Verified By: Chuck N. I DON’T HAVE IT IN STOCK. It’s kind of sad really, because I happened to know they were good people with a good product. Blocking can be the result of any or all of the following. Low ball offers especially on items without “Make an Offer” – These are offensive. This suggestion should not cause anyone to go off the rails! In the past when I’ve reversed a block, 100% of the time a repeat offense occurs. It’s just in the nature of these buyers. But, not the way I choose to do business. I can’t really account for this but it can be frustrating not knowing where a package is. Some would call it trash but there are no food products in the box. This re-use is good for our land fills in Michigan. I will provide the pallet and band the item to it. A Liftgate is required. Emco Unimat DB200 SL1000 Emco Unimat 3 Emco Compact 5 (or Sears Craftsman) Emco Compact 5 Unimill Emco Compact 8 (or Sears Craftsman) Emco Compact 10 Emco Maximat 7 (or Emcomat or Mentor) Emco Maximat V8 Emco Maximat V10 (or Emcomat or Mentor) Emco Maximat V10-P Emco Maximat Super 11 Emco Maximat Super 11CD Emco VMC-100 Emco Maximat FB-2 Emco Maximat Miller…………………….. The best thing to do is join the emcoV10lathe OR EmcoSuper11lathes OR Unimat OR Other user groups at groups followed by a dot and then io (originally on yahoo). You request to join the group. If accepted, you will have access to a wealth of downloadable information and can post questions. They cover all questions and discussions pertaining to ALL the above lathes and mills. This is by far the largest group of Emco lathe owners in the world. ANY question pertaining to parts INTERCHANGEABILITY between different models or brands unless stated in the listing. ANY engineering inquiry regarding SIZE, WEIGHT, LENGTH & DIAMETER. Please join a user group and post your questions to the group (as noted above). I get more than 1000 parts requests each year……. I don’t have any software for keeping track of these requests. I can be found at Emco Hobby Shoppe if you have something to sell. With my older inventory, if I’m motivated, I lower the prices gradually over time. In general, I respond unfavorably to low ball offers and especially so, when “Make An Offer” is not part of the listing. I typically have quite a stack of sales to process.

This Machinist Microbore Flash Change Chuck with Key is a high-quality tool, made in the USA. It is designed for use with CNC, metalworking, and manufacturing equipment, specifically machining centers and milling machines. This chuck is a valuable addition to any workshop, as it allows for efficient and precise work. The chuck has been tested and works very well. It comes with a key for easy and secure installation. This tool is ideal for those in the business and industrial sector who are looking for reliable and durable equipment. Get your hands on this microbore flash change chuck and take your work to the next level. Feel free to check out my other tools.

Used Bridgeport Quick Change Tool Holder Set of 9ea. They fit a milling machine. It is just the collets and doesn’t include a holder. Three sizes shell mill and two are missing screws. Straight sizes 3/16″, 1/4″, 3/8″, 1/2″, 5/8″, 3/4″. These pieces can be picked up from my shop which is 10 miles south and east of downtown Saint Louis, Missouri. Please check out my other auctions. Due to items not being picked up in a timely manner: Machines that are being picked up will be stored free for 14 days… Items not picked up within 60 days will be resold. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “ddmo1″ and is located in this country: US. This item can be shipped to United States.

• Brand: Bridgeport
• Function: Milling
• Control: Manual
• Machine Type: Milling Machine
• Custom Bundle: No
• Modified Item: No