SURPLUS & MACHINERY SALES. MAZAK QUICK TURN 15 TYPE CNC LATHE AS-IS-WHERE-IS FOR SERIOUS BUYER_1COME1SERVE! Track Page Views With.
Comments Off
Good Material: the lathe tool holder is made in mental and not easy to wear, very firm and durable. Usage Characteristics: They have broad utility which are easy to install and operate. 3.100% brand new and high quality. Length: 215mm (8.5). Width: 65mm (2.56). Center height: 67mm (2.6). Travel: 80mm (3.15). Slot height: 22mm (0.87). Handwheel length: 100mm (3.9). Installation hole spacing: 106mm (4.17). Key width: 12mm (0.47). Base width: 106mm (4.17). Total weight: 4.89KG. Width: 80mm (3.14). Center height: 74mm (2.9). Travel: 70mm (2.76). Handwheel length: 122mm (4.8). Disc diameter: 89mm (3.5). Hole spacing: 110mm (4.3). Small aperture: 11mm (0.43). Center height: 76mm (3). Slot height: 16mm (0.87). Handwheel length: 82mm (3.2). Base width: 104mm (4). Length: 235mm (9.25). Width: 67mm (2.6). Center height: 102mm (4). Maximum clamping: 70mm (2.7). Left and right rotation: 60 °. Base width: 111mm (4.4). Installation hole spacing: 114mm (4.5). Positioning key width: 12mm (0.47). Total weight: 6.85KG. 1 Lathe Tool Holder (Depending on your choice). There are NO EXCEPTIONS! OR, you may choose to have a replacement. We will reply you ASAP. Our aim is to provide Top Level Customer Service, normally so we will try our best to solve any problem you have. Our customer-oriented service strives for. Business time: GMT8 (9:00-18:00) from Monday to Friday.
Comments Off
Please call with any questions. We will assist you in any reasonable way to help get your items to your destination, All checks subject to bank verification. Please Call: Two Zero T hree, Five Nine Two, Eight Four Zero Two, with any questions or concerns, Thank You! You are welcome to inspect any machine by appointment. Guerrera Machine Company, LLC. Will not be held liable for any inaccurate information.
Comments Off
Comments Off
To obtain hobby machines, I travel regularly through out the Midwest, South and Eastern United States from my residence near Toledo, Ohio. It’s cheaper but it ain’t free. I do not deliver to Canada. I MIGHT BE ABLE TO DELIVER YOUR ORDER FOR LESS……… Emco_Hobby_Shoppe Listing Banner Revised 03/15/2023. Dorian, made in USA, Your lathe must have 4 long bolt to secure this tool post. Good or better cosmetic condition. Some tool marks from light use. Xidation and oil stains from sitting unused for ages. Listing Data Verified By: Chuck N. I DON’T HAVE IT IN STOCK. It’s kind of sad really, because I happened to know they were good people with a good product. Blocking can be the result of any or all of the following. Low ball offers especially on items without “Make an Offer” – These are offensive. This suggestion should not cause anyone to go off the rails! In the past when I’ve reversed a block, 100% of the time a repeat offense occurs. It’s just in the nature of these buyers. But, not the way I choose to do business. I can’t really account for this but it can be frustrating not knowing where a package is. Some would call it trash but there are no food products in the box. This re-use is good for our land fills in Michigan. I will provide the pallet and band the item to it. A Liftgate is required. Emco Unimat DB200 SL1000 Emco Unimat 3 Emco Compact 5 (or Sears Craftsman) Emco Compact 5 Unimill Emco Compact 8 (or Sears Craftsman) Emco Compact 10 Emco Maximat 7 (or Emcomat or Mentor) Emco Maximat V8 Emco Maximat V10 (or Emcomat or Mentor) Emco Maximat V10-P Emco Maximat Super 11 Emco Maximat Super 11CD Emco VMC-100 Emco Maximat FB-2 Emco Maximat Miller…………………….. The best thing to do is join the emcoV10lathe OR EmcoSuper11lathes OR Unimat OR Other user groups at groups followed by a dot and then io (originally on yahoo). You request to join the group. If accepted, you will have access to a wealth of downloadable information and can post questions. They cover all questions and discussions pertaining to ALL the above lathes and mills. This is by far the largest group of Emco lathe owners in the world. ANY question pertaining to parts INTERCHANGEABILITY between different models or brands unless stated in the listing. ANY engineering inquiry regarding SIZE, WEIGHT, LENGTH & DIAMETER. Please join a user group and post your questions to the group (as noted above). I get more than 1000 parts requests each year……. I don’t have any software for keeping track of these requests. I can be found at Emco Hobby Shoppe if you have something to sell. With my older inventory, if I’m motivated, I lower the prices gradually over time. In general, I respond unfavorably to low ball offers and especially so, when “Make An Offer” is not part of the listing. I typically have quite a stack of sales to process.
Comments Off
Used Bridgeport Quick Change Tool Holder Set of 9ea. They fit a milling machine. It is just the collets and doesn’t include a holder. Three sizes shell mill and two are missing screws. Straight sizes 3/16″, 1/4″, 3/8″, 1/2″, 5/8″, 3/4″. These pieces can be picked up from my shop which is 10 miles south and east of downtown Saint Louis, Missouri. Please check out my other auctions. Due to items not being picked up in a timely manner: Machines that are being picked up will be stored free for 14 days… Items not picked up within 60 days will be resold. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “ddmo1″ and is located in this country: US. This item can be shipped to United States.
Comments Off
4 x holders – max. Tool 10mm x 10mm. 1 x Holder ER 11. 1x Holder Boeing + boring tool. 1 x Carbite Insert DCMT 070204. 1 x T8 Wrench. 1x Holder Centering Roller tool. Goods will only be accepted for return if they are despatched within 14 days of delive. This item is in the category “Business, Office & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “jangr5028″ and is located in this country: GB. This item can be shipped worldwide.
Comments Off
Quick Turn 20 H-P. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “xcalliber1984″ and is located in this country: US. This item can be shipped to United States.
Comments Off
HAAS DT1, 5-AXIS VMC 15HP 15,000 RPM 2400 IPM. QUICK CHANGE PALLETS 20+1 CHANGER. ONLY 411 HOURS OF FEED CUTTING TIME. DRILL/TAP CENTER, 20 X 16 X 15.5. 20+1 SIDE MOUNT TOOL CHANGER. POWER FAILURE DEDECTION MODULE. 15 COLOR LCD MONITOR. 45 GALLON FLOOD COOLANT. AXIS DRIVE AND WIRING FOR ROTARY. AXIS TR110CNCB TRUNNION ROTARY. INTGRATED BRUSHLESS ROTARY CONTROL. AIR OVER HYDRAULIC BRAKES 4. MIDACO PALLET CHANGER AND PALLETS. The item “HAAS DT1, 5-AXIS VMC 15HP 15,000 RPM 2400 IPM QUICK CHANGE PALLETS 20+1 CHANGER” is in sale since Monday, June 28, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “cbrunjr” and is located in Dayton, Ohio. This item can’t be shipped, the buyer must pick up the item.
Comments Off
78 x 80 x 98. 208-240 VAC 3-phase or 240 VAC 1-phase, 50-60 Hz. 3.5 Floppy Drive. Coolant Tank & Pump. Used Equipment Sales Contact. To see if you qualify contact Celeste Bozzi. Please verify it’s availability before purchasing! Skidding/Crating of items are extra costs. All items are subject to prior sale. Established 2009, 520 Machinery Sales is a full service machine tool distribution company servicing the Northern Illinois territory for new equipment and across the nation for Used Equipment. We have recently opened a satellite office in Phoenix AZ for Used Equipment sales. 520 Machinery Sales consists of a 30 person team; which includes two office administrators, eight new equipment sales professionals, ten Used Equipment sales professionals, ten Service and Application Engineers including a dedicated Parts Manager. Also, included is an automation specialist for robotics and custom applications. Our service personnel are involved in factory training including both Fanuc and Mitsubishi programming. Our locations include a 10,000 sq. Office and showroom in Schaumburg along with an additional 5,000 sq. Used Equipment Center also located in Schaumburg and a 2000 sq. Sales office in Phoenix. We have been awarded with winning Service and Sales achievements in 2017 and have achieved builder sales quotas in all years since 2010. Product offerings include: Samsung Machine Tools, Muratec Machinery, Tornos, Milltronics Machinery along with various machine tool accessory offerings. Our company mission is to support our customers by providing superior products and services of exceptional value which help them gain competitive advantage in their market. 520 Machinery Sales strives to provide the highest standards of service available through our highly trained sales and service personnel. We provide work environments where our employees can meet their potential and thrive in an atmosphere of excellence. We strive to exceed the industry standard in service to customers while maintaining a superior level of integrity in interactions with business partners and associates. 520 Machinery Sales appreciates our achieved success and conduct our business as model corporate citizens. John Schneider; Co-Owner of 520 Machinery Sales. With 24 years of machine tool sales history and previously worked for family business of a contract machining company. Everett Dahlberg; Co-Owner of 520 Machinery Sales. With over 25 years of sales history with over 20 years of machine tool sales experience. Dave Fahlgren; Co-Owner of 520 Machinery Sales. With 15 years of machine tool sales experience. Wes Kowalczyk: Over twenty years of machine tool sales experience and joined the 520 sales staff in 2011. Mike Land- 30 years of machine tool sales experience and joined the 520 sales staff in 2015. Dan Anderson- 20 years of machine tool sales experience and joined the 520 sales staff in 2019. Brian Doherty- Has ten years of industrial sales experience and joined the 520 sales staff in 2015. In addition to our new sales team, 520 machinery has a 9 person strong used equipment team. The used equipment team helps to generate new equipment sales through various outlets not traditionally used for new equipment. The inside sales role of 520′s used equipment team is something that sets 520 apart from our competition. The used equipment team is as follows. Mark Lipowski- used equipment manager, 20+ years in used equipment sales. Bob Nelson- 20+ years in used equipment sales. Jason Stob- 12+ years in used equipment sales. Nate Parker- 10+ years in used equipment sales. Brian Foerster- 5+ years in used equipment sales. Zeno Molteni- 5+ years in used equipment sales. Our company philosophy has and will be to maintain the highest degree of integrity along with a teamwork mentality when working with customers, builders and vendors. We are financially strong and we pride ourselves on our ability of making payments in a timely manner. Data base of northern Illinois territory with Sales Force as the CRM. Aggressive marketing campaigns consisting of cold calling, direct mailings, mass e-mails, websites, trade association involvement and telemarketing. Our used equipment staff has been trained to augment our new equipment sales by offering trade-in programs, often times with other machine tool distributors all across the country. The item “Used Haas Mini Mill CNC Vertical Machining Center Mill CT40 Rigid Tap Quick Code” is in sale since Wednesday, July 28, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “520machinery” and is located in Schaumburg, Illinois. This item can’t be shipped, the buyer must pick up the item.
Comments Off
