1998 Kitamura MyCenter 2XAPC With Pallet Changer Cutting Hours 142. Table Work Area (Width x Length): 11.81 x 19.69 Inch. Table Load Capacity: 176 Pounds. Longitudinal Travel (X Axis): 20.08 Inch. Cross Travel (Y Axis): 13.98 Inch. Vertical Travel (Z Axis): 18.11 Inch. Spindle Speed 20 10000 RPM. Rapid Feed (X Axis) Auto: 1417 Inch/Min. Rapid Feed (Y Axis) Auto: 1417 Inch/Min. Rapid Feed (Z Axis) Auto: 944.9 Inch/Min. Cutting Feed (X, Y And Z Axis): 590.6 Inch/Min. Tool Storage Capacity: 20. Tool Change Time (Tool To Tool): 1.7 Sec. Spindle Motor: AC 11 kw. Main Circuit: AC 200/220V. Power On: 7627 Hrs. Link to YouTube video of machine running. Machine Is Available For Inspection Under Power By Appointment. The item “1998 Kitamura MyCenter 2XAPC With Pallet Changer Very Low Hours WithVideo/Exilent” is in sale since Saturday, August 11, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “jkwapich1″ and is located in O’Fallon, Missouri. This item can be shipped to United States.

• Modified Item: No
• Custom Bundle: No
• MPN: 2XAPC
• Brand: Kitamura
• Non-Domestic Product: No

SHIZUOKA AN-S Vertical CNC Knee Mill. With Hasbach Bandit Control. Very good working condition. Demo video of this machine under power available upon request. The Shizuoka AN-S mill was manufactured by the Shizuoka Machine Tool Company whose origin can be traced back to 1877. The Hasbach Company’s CNC specialist completed the mill with a Bandit control to the same high standards as Shizuoka using the finest locally manufactured components. The Bandit control, one of the first CNC controls on the market, is still one of the most economical and easiest to use controls. This Shizuoka-Bandit machining center features feeds and speeds under NC control, contouring, a 4 HP husky spindle, and the versatile programming allowed by the CNC microprocessor. A heavy duty mill for those tough materials. Central “one-shot” lube system. Linear and Circular Interpolation. Table Length on Saddle. Saddle Width on Knee. Knee Height on Column. 80 – 3800 rpm. 220/440 Volt, 60 Hz, 3 Phase. Specifications subject to verification. Items over 3000 lbs. Less than 12000 lbs. We will not palletize, skid or crate an item over 1000 lbs. These items are prepared for transit by wrapping the item’s electrical components with stretch wrap and spraying down any exposed metal surfaces with protective oil. These items exceed our forklift’s capacity. We may charge more in the case of items located outside our showroom. MACHINE DIMENSIONS: 60″ x 60″ x 80H. MACHINE WEIGHT: 5,700 lbs. We accept all major credit cards except American Express. Orders are not processed until theyre paid in full. The item “SHIZUOKA AN-S 3-Axis CNC KNEE MILL 51x11Table with BANDIT Control & Tool Changer” is in sale since Wednesday, August 22, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “p20933b” and is located in Chatsworth, California. This item can be shipped to United States.

• Model: AN-S
• Country/Region of Manufacture: Japan
• Brand: Shizuoka
• Mach No.: 60557

1998 Kitamura MyCenter 2XAPC With Pallet Changer Cutting Hours 142. Table Work Area (Width x Length): 11.81 x 19.69 Inch. Table Load Capacity: 176 Pounds. Longitudinal Travel (X Axis): 20.08 Inch. Cross Travel (Y Axis): 13.98 Inch. Vertical Travel (Z Axis): 18.11 Inch. Spindle Speed 20 10000 RPM. Rapid Feed (X Axis) Auto: 1417 Inch/Min. Rapid Feed (Y Axis) Auto: 1417 Inch/Min. Rapid Feed (Z Axis) Auto: 944.9 Inch/Min. Cutting Feed (X, Y And Z Axis): 590.6 Inch/Min. Tool Storage Capacity: 20. Tool Change Time (Tool To Tool): 1.7 Sec. Spindle Motor: AC 11 kw. Main Circuit: AC 200/220V. Power On: 7627 Hrs. Link to YouTube video of machine running. Machine Is Available For Inspection Under Power By Appointment. The item “2001 Kitamura MyCenter 2XAPC With Pallet Changer Very Low Hours WIth Video” is in sale since Saturday, November 4, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “jkwapich1″ and is located in O’Fallon, Missouri. This item can be shipped to United States.

• MPN: 2XAPC
• Brand: Kitamura

Complete Haas Mini Mill Umbrella Automatic Tool Changer. The item “Complete Haas Mini Mill Automatic Tool Changer” is in sale since Friday, November 11, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “amcoinc” and is located in Longmont, Colorado. This item can’t be shipped, the buyer must pick up the item.

Check out these 1630SX features. Manual or CNC operation. Electronic hand wheels and jogstick. Constant Surface Speed (CSS) Programming. Inch Per Revolution (IPR) Programming. TRAKing for manual control of CNC programs. 4 Station Star Indexer for automatic tool changes. Beautiful and precise threading. And these important features. 16 swing, 30 between centers. Spindle through hole of 2.12. 8″ Bison Set Tru 3-jaw chuck(0.0002″ repeatability). 150 IPM Z/100 IPM X. MT#4 taper heavy duty tailstock. 9 gal coolant tank w/pump. Quadra Cool 750 manifold for 4 sta. Ideal for small parts, but a generous swing for versatility. Will run older Lx2 programs and cam files. At home in a tool room or where ever you like. 240V/3ph for spindle and 120v for control. The item “SWI Prototrak 1630SX CNC Lathe-New in 2016 with4 station automatic tool changer” is in sale since Wednesday, April 11, 2018. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “seadirt” and is located in Litchfield, Michigan. This item can’t be shipped, the buyer must pick up the item.

• Brand: Southwestern Industries
• Model: 1630 SX CNC Lathe
• Country/Region of Manufacture: Unknown
• Bundle Listing: No

HI YOU ARE LOOKING AT A POWER DRAW BAR FOR A VARIABLE SPEED R8 COLLET IMPORT AND BRIDGEPORT TYPE MILLING MACHINE. JET, MSC, ATRUMP, WT TOOL, ACRA, ACER, CHEVLAIR, ENCO, TRAVERS, SUPERMAX, AND MANY MORE. THE MOST SIMPLE AND ECONOMICAL POWER DRAWBAR OUT THERE. IT WORKS FROM AIR PRESSURE 90 PSI MAX. A HUGH TIME AND AGGRAVATION SAVER NO LOST TIME LOOKING FOR YOUR WRENCH OR HAMMER. MAIN BODY MADE OF 6061 ALUMINUM, MAIN FRONT SLIDE IS MADE WITH STEEL ROD AND NYLON BUSHING, FOR LONG LIFE AND TO DAMPEN ANY VIBRATION FROM THE HEAD. ONE SCREW REMOVES TOP PART TO GIVE ACCESS TO DRAW BAR. CAN BE MOUNTED IN MANY POSITIONS AROUND THE HEAD TO FIT YOUR OWN PREFERENCE. HANDLE FULLY ADJUSTABLE TO FIT YOUR PREFERENCE AND TO TAKE UP ANY WEAR THAT MAY TAKE PLACE OVER TIME. COMES ASSEMBLED COMPLETE WITH IMPACT WRENCH READY TO MOUNT ON YOUR MILL AND USE. IF YOUR COLLET STICKS IN THE SPINDLE RETURN THE IMPACT TO THE TOP AND BRING IT DOWN AND STRIKE THE DRAWBAR AS YOU WOULD WITH A HAMMER THERE IS ALSO A REGULATOR BUILT IN THE IMPACT WRENCH TO KEEP FROM OVER TIGHTENING THE DRAWBAR.. ALL OF THE MAIN BODY IS MADE AND ASSEMBLED IN OUR SHOP HERE AT M&T MACHINE , TAYLORSVILLE N. WE HAVE USED THIS TYPE POWER DRAW BAR IN OUR SHOP FOR MORE THAN 10 YEARS WITH NO PROBLEMS. The item “POWER FEED POWER DRAWBAR TOOL CHANGER MILL” is in sale since Sunday, January 24, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “atd1962″ and is located in Taylorsville, North Carolina. This item can be shipped to North, South, or Latin America, all countries in Europe, Australia.

• Brand: M&T MACHINE
• MPN: DB-1000VS
• Country/Region of Manufacture: United States
• Model: DB-1000VS
• Country of Manufacture: United States

Up for sale is a new G0704 Quick Change Pneumatic Tool Changer. This is a pneumatic, foot operated tool changer for the G0704. It will work with both Manual and CNC conversion. With this Pneumatic draw bar conversion, you can change tools in seconds instead of minutes. It also reduces the wear on the draw bar by not unscrewing and re screwing collets constantly. The kit comes with everything you need to change over your mill to a quick tool changer. I will include basic instructions for install and setup. Installation only takes 30 minutes. There is no modification of your mill. It couples right up to your air supply and 110 PSI is recommended for operation. Quick tool changer bracket. Pneumatic Foot Control Pedal. 24 feet of Pneumatic hose. New drawbar with R8 3/4 collet and springs. 4 bolts for mounting bracket. You will need tool holders for this system to work. This setup is designed to work with 3/4 Straight ER Collet holders. You can use ER16 , ER20, or ER32. The Tormach Tooling system will also work with this setup. If you have any questions, please free to ask. I also offer discounts, please contact me for details. This kit will not work with a G0704 that has had belt drive conversion completed. If you have a Belt Drive conversion, please contact me as I have another kit that will with a Belt drive conversion. The item “G0704 Quick Change Pneumatic Tool Changer with Foot Control” is in sale since Tuesday, May 16, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “icer351″ and is located in Lenexa, Kansas. This item can be shipped to United States.

• Brand: G0704 Quick Change Tooling
• MPN: Does Not Apply

HAAS VF-3 VERTICAL MACHINING CENTER WITH 10K SPINDLE AND SIDEMOUNT ATC. TRAVELS: 40X X 20Y X 25Z. 10,000 MAX RPM. 24 + 1 SIDEMOUNT TOOL CHANGER. COORDINATE ROTATION AND SCALING. MACHINE IS UNDER POWER AND AVAILABLE FOR INSPECTION IN. ALL AXES AND SPINDLE ARE SMOOTH AND QUIET. LOADING ON FLATBED OR LINE TRUCK INCLUDED. The item “2003 HAAS VF-3 10K RPM WITH SIDEMOUNT TOOL CHANGER” is in sale since Monday, July 10, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “eskridgegoat” and is located in Oxnard, California. This item can be shipped to United States.

• Brand: HAAS
• MPN: VF-3D
• Country/Region of Manufacture: United States
• Model: VF-3

Up for sale is a new G0704 Quick Change Pneumatic Tool Changer. This is a pneumatic, foot operated tool changer for the G0704. It will work with both Manual and CNC conversion. With this Pneumatic draw bar conversion, you can change tools in seconds instead of minutes. It also reduces the wear on the draw bar by not unscrewing and re screwing collets constantly. The kit comes with everything you need to change over your mill to a quick tool changer. I will include basic instructions for install and setup. Installation only takes 30 minutes. There is no modification of your mill. It couples right up to your air supply and 110 PSI is recommended for operation. Quick tool changer bracket. Pneumatic Foot Control Pedal. 24 feet of Pneumatic hose. New drawbar with R8 3/4 collet and springs. 4 bolts for mounting bracket. You will need tool holders for this system to work. This setup is designed to work with 3/4 Straight ER Collet holders. You can use ER16 , ER20, or ER32. The Tormach Tooling system will also work with this setup. If you have any questions, please free to ask. I also offer discounts, please contact me for details. This kit will not work with a G0704 that has had belt drive conversion completed. The item “G0704 Quick Change Pneumatic Tool Changer with Foot Control” is in sale since Tuesday, January 10, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “icer351″ and is located in Lenexa, Kansas. This item can be shipped to United States.

• Brand: G0704 Quick Change Tooling

2011 HAAS SMINIMILL 2. 10 Position Tool Changer. It is currently under power and ready for a demonstration. The item “HAAS SMINIMILL 2 with 10 POSITION TOOL CHANGER 2011 HAAS MINI MILL 2 WithVIDEO” is in sale since Monday, November 21, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “airtronicsinc” and is located in Tucson, Arizona. This item can’t be shipped, the buyer must pick up the item.

• Brand: HAAS