Friedrich Deckel FP1 Milling machine with NC control. This is a quality German made mill. Very accurate and works properly. I never used the NC control so cant speak for that. I have a set of collets which will come with the machine. The item “Friedrich Deckel FP1 Milling machine with NC control” is in sale since Friday, December 27, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “fabmannc1969″ and is located in Reidsville, North Carolina. This item can’t be shipped, the buyer must pick up the item.

• Machine Type: Milling Machine
• Function: Milling

This lathe is in very nice shape this lathe was used for cutting buffs Cloth buffing wheels for polishing light fixtures.. So as you may guess it was used very little for its capacity.. This machine could use a little cleaning. Thank you for your Business! The item “Prototrak 1440 cnc lathe control nice southwestern Industries” is in sale since Sunday, July 21, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “tooltimes2″ and is located in Graytown, Ohio. This item can be shipped to United States.

• Brand: southwestern industries

2003 Hurco 3-Axis CNC Vertical Machining Center. X – Axis Travel. Y – Axis Travel. Z – Axis Travel. Rapid Traverse Rate, All Axis. 72″ x 83″ x 96 High. Hurco UltiMax 3 CNC Control with Floppy Disk Drive. OptiKey Utility Disk Rev. R – Classic Upgrade. Q – Rigid Tap. Installation & Configuration Disks. UniMax OptiKey Utility Disk. (22) CAT – 40 Tool Holders. Coolant Pump & Tank. 10/15 – HP Spindle Motor. The item “Hurco 3-Axis CNC Vertical Machining Center, VM1, 2003, UniMax 3 Control” is in sale since Tuesday, September 10, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “neindustrialmachinery” and is located in New Britain, Connecticut. This item can’t be shipped, the buyer must pick up the item.

• Model: VM1
• Machine Type: Vertical Milling Machine
• Table Length: 30
• Max Spindle Speed (RPM): 8000
• Model Year: 2003
• Power Source: Electric
• X-Axis Travel Bed: 26″
• Y-Axis Travel Bed: 14″
• Z-Axis Travel Bed: 18″
• Spindle Taper: CAT 40
• MPN: VM1
• Function: Milling
• Brand: Hurco
• Table Width: 14
• Control: CNC
• Voltage: 230 V

9 x 48 Bridgeport 2 Axis CNC Milling Machine, Model Series I EZ Trak DX, S/N 270876 L Machine Description. 9 x 48 Table. Positioning Speed 100 IPM. Spindle Speeds 55 4200 RPM. 2 HP, 220 Volt, 3 Phase. Machine Weight 2000 LBS. Bridgeport EZ Trak DX Control. Manual or CNC Operation. Excellent Condition – Milling Head is quiet with original Flaking on Ways. No charge for loading; We can help finding competitive trucking to your destination. Inspect under power in Lebanon, NJ. The item “BRIDGEPORT EZ TRAK CNC VERTICAL MILLING MACHINE WITH DX CNC CONTROL 9×48 TABLE” is in sale since Tuesday, July 30, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “muke2000″ and is located in Lebanon, New Jersey. This item can be shipped to United States.

• Model: EZ TRAK
• Modified Item: No
• Spindle Horsepower: 2 hp
• Country/Region of Manufacture: United States
• Custom Bundle: No
• Machine Type: Milling Machine
• Table Length: 40 in – 59.9 in
• Max Spindle Speed (RPM): 4001 – 4500
• Model Year: 1996
• Power Source: Electric
• X-Axis Travel Bed: 26 in – 30 in
• Y-Axis Travel Bed: 10 in – 15 in
• Z-Axis Travel Bed: 16 in – 20 in
• Spindle Taper: R8
• MPN: Does Not Apply
• Function: Drilling
• Brand: Bridgeport
• Table Width: 48″
• Control: Bridgeport 2-Axis DX Control
• Voltage: 220 V 3 Phase

Item #15682A HAAS MODEL VF-0 VERTICAL MACHINING CENTER WITH HAAS CONTROL, 20 X 16 X 20. EQUIPPED WITH HAAS CONTROL PROGRAMMABLE COOLANT CHIP AUGER 4TH AXIS READY RIGID TAPPING 1 MB EXTENDED MEMORY QUICK CODE PROGRAMMING COORDINATE ROTATION & SCALING FLOPPY DRIVE. TRAVELS X AXIS: 20 Y AXIS: 16 Z AXIS: 20 SPINDLE NOSE TO TABLE: 4 -24. TABLE LENGTH: 26 WIDTH: 14 MAXIMUM WEIGHT ON TABLE: 3,000 LBS. 625 CENTER DISTANCE: 4.92. FEED RATES RAPIDS: 710 IPM MAXIMUM CUTTING: 500 IPM. TOOL CHANGER CAPACITY: 20 TYPE: CT-40 MAX. TOOL DIAMETER: 3.5 MAX. TOOL WEIGHT: 12 LBS. GENERAL DOOR OPEN WIDTH: 35.50 AIR REQUIRED: 4 SCFM, 100 PSI DIMENSIONS 92 LR X 95 FB X 95 H MACHINE WEIGHT: 7,000 LBS ELECTRICS: 208 VOLTS, 3 PH, 60 CYC. All specifications subject to verification. Rigging and hauling not included. Brewster Machinery Sales Inc. Kevin Brewster President / AEA. Former MDNA Chapter Leadership Chairman, Former New England Chairman, and Former New England National Board Representative. AMEA Accredited Equipment Appraiser. Will answer all of your questions and put everything in writing before the deal is closed. The item “HAAS MODEL VF-0 VERTICAL MACHINING CENTER WITH HAAS CONTROL, 20 X 16 X 20″ is in sale since Thursday, May 16, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “brewstermachinery” and is located in Watertown, Connecticut. This item can be shipped to United States.

• Make: Haas

Item# 15491A HAAS MODEL VF-4 VERTICAL MACHINING CENTER WITH PALLET CHANGER & HAAS CONTROL, 50 X 20 X 25. HAAS CNC CONTROL WITH FLOPPY DRIVE. 1 MB EXPANDED MEMORY. SPINDLE NOSE TO TABLE: 4 29. MAXIMUM WEIGHT ON TABLE: 3,500 LBS. CENTER DISTANCE: 3.15. TAPER SIZE: #40 TAPER. SPEED: 0 7,500 RPM. DOOR OPEN WIDTH: 48.50. MACHINE WEIGHT: 13,300 LBS. AIR REQUIRED: 4 SCFM, 100 PSI. MACHINE DIMENSIONS: 144 LR X 95 FB X 107 H. PALLET CHANGER DIMENSIONS: 53 LR X 65 FB X 42 H. ELECTRICS: 230 VOLTS, 3 PH, 60 CYC. All specifications subject to verification. Rigging and hauling not included. Brewster Machinery Sales Inc. Kevin Brewster President / AEA. Former MDNA Chapter Leadership Chairman, New England Board Representative. AMEA Accredited Equipment Appraiser. Will answer all of your questions and put everything in writing before the deal is closed. The item “HAAS VF-4 VERTICAL MACHINING CENTER WITH PALLET CHANGER & HAAS CONTROL” is in sale since Friday, September 28, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “brewstermachinery” and is located in Bethel, Connecticut. This item can be shipped to United States.

• Model: VF-4
• MPN: Does Not Apply
• Brand: Haas
• UPC: Does not apply

See Video of Machine Running a Program. This machine just came from service last month where it was turning out close tolerance parts on a daily basis for the Aeronautics Industry. It has a Rebuilt Spindle Drive. It is a Beautiful, Well Cared for Machine that is ready to go to work. Fadal Model 3016 (904-1) CNC Vertical Machining Center (VMC). Axis Travel: 20 inch. Overall Length: 116 inch. ALL SPECIFICATIONS SUBJECT TO VERIFICATION BY PURCHASER. This Machine has 63,747 Power On hrs. And only 7,841 Running hrs. We will load, free of charge. First of all, our descriptions are as accurate as we can possibly make them, and we’ve been describing equipment for longer than we care to admit. Every item we sell, unless otherwise stated, is available for inspection at our Miamisburg, Ohio Warehouse 515 Kercher St. Best Ways Brokerage Inc. This Machine will weigh approx. 8,500# and occupy 10′ of bed space. The item “1994 Fadal 3016 VMC with Fadal CNC 88HS CNC Control and RS232 Port” is in sale since Wednesday, January 16, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “u$ave2″ and is located in Miamisburg, Ohio. This item can be shipped to United States.

• Highest Spindle Speed (RPM): 5001 – 7500
• Model: 3016 (904-1)
• Country/Region of Manufacture: United States
• Spindle Horsepower: 15
• Table Length: 35” – 39.9”
• Model Year: 1994
• Make: Fadal
• Serial Number: 9400870
• Power Source: Electric
• Type: CNC, Vertical
• Control Type: Fadal CNC 88HS
• X-Axis Travel Bed: 26” – 30”
• Y-Axis Travel Bed: 16” – 20”
• Z-Axis Travel Bed: 16” – 20”
• Spindle Taper: CAT 40
• Function: Drilling
• Brand: Fadal
• Table Width: 15” – 19.9”
• Control: CNC
• Voltage: 230 V

Have a machine or an entire facility to sell? Turn your surplus into CASH! Matsuura MC-760VX Vertical Milling Machine. Spindle Center to Column. Rapid Traverse Rate (X/Y/Z). Max Cutting Feed Rate. 10-HP Motor 220V / 3-Phase / 60Hz. 45.28″ x 16.14″. 25 – 4,500 RPM. 590 / 590 / 472 IPM. 1.9 Seconds Tool to Tool. 102″ x 118″ x 105 High. Fanuc Series O-M Control. Fanuc Red Cap Motors. Coolant Pump and Tank. Matsuura MC-760VX CNC Vertical Machining Center – YouTube. If any other information is needed to help you with quoting, please send us a message. Cash, wire transfers, or company checks are welcome and encouraged. This guarantee applies only to machines, which we own. Shall not be responsible for any damages done by truckers, riggers, or other parties. All machine prices include loading unless otherwise stated. Machinery descriptions are intended as a guide only and their accuracy is not guaranteed. There are no warranties which extend beyond the description of the face hereof. Quotations subject to change without notice. It is the buyers and users responsibility to provide proper safety devices, training and equipment to safeguard the operator from harm for any particular use, operation or set up, and to adequately safeguard the machine, or machines, to conform to all Federal, State and Local Government Safety Standards and All Industry Safety Standards. The item “Matsuura MC-760VX CNC Vertical Machining Center Fanuc Control, ID# M-021″ is in sale since Thursday, August 2, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “energ_machinery” and is located in East Hampton, Connecticut. This item can be shipped to United States.

• Spindle Horsepower: 10
• Table Length: 40” – 59.9”
• Model Year: 1991
• Type: CNC, Vertical
• Control Type: Fanuc
• X-Axis Travel Bed: 26” – 30”
• Y-Axis Travel Bed: 16” – 20”
• Z-Axis Travel Bed: 16” – 20”
• Highest Spindle Speed (RPM): 4001 – 4500
• Make: Matsuura
• Table Width: 15” – 19.9”

Proto Trak TRM CNC bed milling machine with a 40 taper spindle and MX2 control- a 2 axis machine. PLEASE CHECK MY OTHER ITEMS. I leave the worn out and repainted machinery for the other guys. The item “Proto Trak TRM CNC Bed Mill with MX2 Control 40 Taper with Toolholders” is in sale since Saturday, February 10, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “mark10312″ and is located in Farmingdale, New Jersey. This item can be shipped to United States.

• Model: DPM TRM
• Country/Region of Manufacture: United States
• Type: CNC, Vertical
• Control Type: CNC
• Make: Proto Trak

Complete 4-axis CNC Mill. 4 Servomotors with High-resolution Encoders. Eding CNC control board. Dell Laptop (control) computer. ArtCAM Express CAD/CAM design software. Sherline CNC Rotary Table. Sherline Adjustable Rotary Table Mount. Mini Vise and other assorted tools and hold-downs. Videos of this mill in use are on YouTube. We will be glad to demonstrate. Height 21-3/8 in (manual) 26-3/8 in (CNC). Width 17 in (manual) 22 in (CNC). Depth 16-3/4 in (manual) 21 in (CNC). Weight 80 lbs (manual) 105 lbs (CNC). Maximum bearing runout 0.0002 in. X axis dovetails 45 deg. Y axis dovetails 90 deg. Z axis steel box ways. 1/2-20 leadscrews on X, Y, & Z. All lead screw drives have friction adjustable micrometer dials in. Bore multi-step vee belt. Construction – Steel, hard anodized aluminum on all moving components, adjustable brass gibs, and precision ground steel ways hand lapped for long life and accuracy. Travel in X axis 9.5 in. Travel in X axis 12 in. Travel in X axis 11.375 in. Travel in Y axis 5.5 in. Travel in Z axis 6.0 in. Table dimensions 3 1/2 x 15 1/2 inches (Model 2018). Table dimensions 3 1/2 x 18.4 inches (Model 2019). Table dimensions 3 1/2 x 18.4 inches (Model 5019). Maximum Z-distance to table 9.0 in. Z-Axis swivel 90 degrees. Z axis column rotation up to 180 degrees. Spindle head rotation 90 degrees. Spindle Runout less than. Maximum spindle speed 10000 RPM. Sealed precision ball bearing. Bearing OD 1.5748 in. ID 0.6692 in. Spindle nose 22mm X 1.5mm. Spindle hole 0.406 in. Spindle ID taper 8 deg (16 deg included). Collet diameter 3/8 in. Pulley size 5/8 in. Ball Bearings in all leadscrew bearing blocks. The item “Taig 4-axis CNC Mill complete with control, computer, and ArtCAM design software” is in sale since Friday, February 22, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “artisticcnc” and is located in Mentor, Ohio. This item can be shipped to United States.

• Model: Mill
• Modified Item: Yes
• Country/Region of Manufacture: United States
• Spindle Horsepower: Less than 1
• Table Length: 10” – 14.9”
• Model Year: 2015
• Country of Manufacture: United States
• Country//Region of Manufacture: United States
• Make: Taig
• Type: CNC, Vertical
• Control Type: EdingCNC
• Highest Spindle Speed (RPM): 7501 – 10000
• X-Axis Travel Bed: 10” – 15”
• Y-Axis Travel Bed: Less than 10”
• Z-Axis Travel Bed: Less than 10”
• Modification Description: Complete CNC system ready to go.
• Brand: Taig
• Table Width: Less than 10”