This item is just the CNC control panel only, servo drivers and motors are not included. This SERVO CNC milling controller features. Nd run the program with our SERVO controller. 8.4 inches color display, tool path live-time monitoring. 64 Mb memory, 32 Mb available for user. Built-in basic PLC function, adjustable I/O signal, 40 inputs, 24 outputs. Additional accessories, coolant, mist, lamps etc. If you want to updates any kind of CNC machines, knee mills, Please give us a call today! The item “SERVO CNC CONTROL PANEL FOR Milling machine, RETROFIT, BRIDGEPORT, ACRA, LAGUN, B” is in sale since Tuesday, August 01, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “toolguys2″ and is located in Eastlake, Ohio. This item can be shipped worldwide.

• Brand: SERVO ORION
• MPN: Does Not Apply
• Model: SERVO CNC MILLING CONTROLLER
• Country/Region of Manufacture: United States

Keeping the FP42NC and this one is up for sale. The “L” series machines are amazing prototype machines. Perfect for those unusual jobs that no other machine will handle. Machine boots and runs programs, operates in all modes. Can be seen below in referenced mode. Spindles are tight and quiet. 3 width in steel below, no chatter! Ways are perfect, with no apparent wear. Buyers are welcome to check the machine out in person at my shop where it is wired to power. This a traveling column machine with glass scales. It has a cutting area of 31″ in X by 15″ in Y and 15 in Z. You wont find another CNC machine with this size envelope anywhere for the footprint. Glass scales make this unit very accurate, you could probably use it as a CMM in a pinch. This machine has a large working surface and a t-slots on the front of the table allowing for overhanging work. The table can be mounted on the next set of T slots for additional headspace. Table can be removed for mounting other angle plates or angle/rotary tables. Mounting face is 45 degrees with 90mm t slot spacing. The upper spindle assembly is on a dovetail so it can be moved forward for extra travel. Factory coolant pump and tank along with (1) Deckel coolant hose assembly with adjustable valve. The control is a Dialog 3 and has RS232 input for loading and sending programs from a PC. It has 24K of memory. Conversational programming as well as standard G code. Electronic handwheel pictured is included. The control enclosure has an integral 440 to 380 transformer. It has a 2500 RPM horizontal and vertical spindle All three NiCAD Batteries packs in the Control and the PLC are newly replaced. I will also provide a working post processor for this machine. The control monitor can be easily converted to LCD. Both the Y and Z axis glass scales have the newer green plastic dust seals but the X axis seals are gone. (X is less important as its hard to get any contamination up there due to the way its mounted). These seals are available from Heidenhain in bulk rolls and are pretty easy to change. I will include printed photo illustrated instructions on how to change the seals out and clean the glass scales. NEW flexible wire bundle protective tubing is installed. European buyers are welcome. _gsrx_vers_526 GS 6.6.6 (526). The item “Deckel FP41NC L Traveling Column CNC Milling Machine with Dialog 3 Control” is in sale since Friday, October 13, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “srlsales” and is located in Petaluma, California. This item can be shipped to United States.

• Brand: Deckel
• Model: FP41NC
• Country/Region of Manufacture: Germany

Bridgeport 9×49 Mill, 2HP, 60 to 4200 RPM. Anilam Crusader M 3-axis CNC control. TEMCO 3-phase converter included (For use with single phase power). Bijur Automatic lubrication system. (12) 200 Series Kwik switch collets. (1) Set of ER20 collets. (1) Set of ER40 collets. (1) RS-232 Cable and settings. Cutting tools NOT included. CNC machine is in good functioning condition, screen works and can be programmed from the control. It has the capability to run programming from the RS-232 port as well. The ways of the machine are in good condition and still holds +/- 0.005. Phase converter is a little noisy but works well. The item “Bridgeport 3 Axis CNC Milling Machine, Crusader M Control + Extras” is in sale since Wednesday, January 03, 2018. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “racerxfab” and is located in Laingsburg, Michigan. This item can be shipped to United States.

• Brand: Bridgeport
• Serial Number: 134818
• MPN: Does Not Apply
• Country/Region of Manufacture: United States

2 Hp Bridgeport Series 1 CNC Vertical Kneemill with 3-Axis Anilam Crusader II Controller. CONTROLLER NEEDS UNKNOWN REPAIR(S). 3-Axis CNC Control w/3x Sema Permanent Magnet DC ServoMotors. Type: MT-30M4-59 Spindle Motor: 2 Hp, 220/440V, 3 Ph, 60 Hz Spindle Speed (Variable): 55 – 4,200 RPM Showa Auto-Lube system 10″ x 50″ T-Slot Table Longitudinal Table Travel: 30″ Cross Saddle Travel: 15″ Vertical Knee Travel: 16″ Spindle Nose: R-8 Spindle Quill Travel: 5″ Spindle Quill Feeds (3x): 0.006″, 0.003″, 0.045″ Ram Travel: 22″ Overall Dimensions: (LxWxH) 65″ x 70″ x 95 (CNC Controller Needs Repair). SPEC’S SUBJECT TO FINAL INSPECTION. IF WE HAVE NOT DONE SO, PLEASE LET US KNOW WHAT WE NEED TO DO THAT’LL ENABLE YOU TO PROVIDE. WE’LL DO OUR VERY BEST TO MAKE IT SO! The item “Bridgeport 2 Hp Vertical Kneemill 10×50 table withAnilam Crusader 2 CNC Control” is in sale since Wednesday, August 23, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “rj-equipment” and is located in Cedarburg, Wisconsin. This item can’t be shipped, the buyer must pick up the item.

• Brand: Bridgeport
• MPN: Does Not Apply
• Country/Region of Manufacture: United States
• Model: 2 Hp Series I Turret Kneemill
• Serial Number: 231418

28″ x 40″ travels. I WILL LOAD YOUR TRUCK FOR FREE!!!!!!!!!!! THANKS FOR LOOKING FROM THE MARCUM MACHINE SHOP. The item “MILLTRONICS Model VM30 CNC Vertical Machining Center, VMC, Centurion Control” is in sale since Monday, September 18, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “greg9991″ and is located in New London, Ohio. This item can’t be shipped, the buyer must pick up the item.

• Country/Region of Manufacture: United States
• MPN: Does Not Apply
• Brand: Milltronics

SHIZUOKA ST-N Vertical CNC Knee Mill. With Hasbach Bandit Control. The Shizuoka ST-N mill was manufactured by the Shizuoka Machine Tool Company whose origin can be traced back to 1877. The Hasbach Company’s CNC specialist completed the mill with a Bandit control to the same high standards as Shizuoka using the finest locally manufactured components. The Bandit control, one of the first CNC controls on the market, is still one of the most economical and easiest to use controls. This Shizuoka-Bandit machining center features feeds and speeds under NC control, contouring, a 3 HP husky spindle, and the versatile programming allowed by the CNC microprocessor. A heavy duty mill for those tough materials. Central “one-shot” lube system. Linear and Circular Interpolation. Table Length on Saddle. Saddle Width on Knee. Knee Height on Column. 80 – 3800 rpm. 220/440 Volt, 60 Hz, 3 Phase. Specifications subject to verification. Items over 3000 lbs. Less than 12000 lbs. We will not palletize, skid or crate an item over 1000 lbs. These items are prepared for transit by wrapping the item’s electrical components with stretch wrap and spraying down any exposed metal surfaces with protective oil. These items exceed our forklift’s capacity. We may charge more in the case of items located outside our showroom. MACHINE DIMENSIONS: 50″ x 60″ x 80H. MACHINE WEIGHT: 3,000 lbs. We accept all major credit cards except American Express. Orders are not processed until theyre paid in full. The item “SHIZUOKA ST-N VERTICAL CNC 27 x 15 KNEE MILL with BANDIT Control, Tool Holders” is in sale since Wednesday, September 20, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “p20933b” and is located in Chatsworth, California. This item can be shipped to United States.

• Brand: Shizuoka
• Country/Region of Manufacture: Japan
• Model: ST-N
• Mach No.: 8591

10 x 50 Compumill 3 Axis CNC Bed Mill, With Autocon 50 Control, Model 1500, S/N 950987, New 1996 Machine Specs: Table Size: 10 x 50 Travels X 30 Y 20 Z (Knee) 20 Quill Manual 5 Main HP 5 HP 220 Volt 3 Phase Spindle Taper #40 NST Spindle Speeds 60 – 4500 (Programable) Head Swivels left and Right 90 Degrees Weight 4500LBS Approx.. Equipped With: Autocon 50 CNC Control. =Conversational/G Code =Programable Spindle Speeds =Rigid Tapping =RS232 Port =Graphics. Kurt Power Draw Bar Coolant Auto Lube Box Ways Bed Design Programming Manual Runs Well, Head Quiet, Ball Screws Also Sound Good Inspect Under Power in Our Lebanon NJ Warehouse. The item “10 x 50 Compumill 3 Axis CNC Bed Mill, With Autocon 50 Control, Model 1500″ is in sale since Wednesday, September 13, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “michaelfinemachineryco” and is located in Somerville, New Jersey. This item can be shipped to United States.

• Brand: compumill
• Country//Region of Manufacture: United States
• Model: 1500

Fadal 907-1 Vertical Machining Center 60/30/30 CNC Fadal 32 MP Control 4th axis. Distance from floor to table surface T-slots (# x width x span) Cutting feed rate (X, Y, & Z axes) Rapid feed rate, all axes Maximum weight on table Longitudinal table travel (X) Cross table travel (Y) Vertical travel, spindle carrier (Z) Minimum/Maximum distance, spindle nose to table Distance from center of spindle to face of column Spindle speed range, geared drive, (2) ranges Spindle taper Number of stations in automatic toolchanger Automatic toolchanger tool selection Maximum tool length Maximum tool weight Maximum tool diameter with adjacent tools. 62-1/2″ x 30″ 35-1/4 5 x. 60″ 30″ 30″ 5.5″/ 35.5″ 30″ 40-10,000 R. CAT 40 21 random/bi-directional 15 15 Lbs. 159″ W x 121″ F-B x 119 High. Link to YouTube video of machine running. Machine Is Available For Inspection Under Power By Appointment. The item “Fadal 60/30 Vertical Machining Center CNC Fadal 32 MP Control/ 4th axis/Video” is in sale since Tuesday, July 25, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “jkwapich1″ and is located in O’Fallon, Missouri. This item can be shipped to United States.

• Brand: Fadal
• MPN: 907-1

TREE VMC 1060 VERTICAL CNC MILLING MACHINE W/ 24 ATC & SIEMENS CONTROL 230V 3PH. Table Size: 50″ X 23.2″ Travels (X, Y, Z): 40″ x 24″ x 25 Table Capactiy: 2000 LBS Spindle Taper: CAT 40 Spinde Speeds: 8000 RPM Max Tool Changer: 24 ATC Spindle Drive: 20/15 HP Voltage: 230V 3 Phase. Machine is exactly as pictured and is fully guaranteed. We will load your truck or carrier free of charge at our loading dock. International buyers are always welcomed. Auctiva Free Image Hosting. Show off your items with Auctiva’s Listing Templates. Track Page Views With. Auctiva’s FREE Counter. The item “TREE VMC 1060 VERTICAL CNC MILLING MACHINE With 24 ATC & SIEMENS CONTROL 230V 3PH” is in sale since Friday, September 16, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “dockguys” and is located in Rochester, New York. This item can be shipped worldwide.

• Brand: TREE
• Model: VMC 1060
• MPN: VMC 1060

PLEASE CALL JIM FOR MORE INFO 7146121480 SPECS TO BE CONFIRMED! SuperMax YCM 1-1/2 VS CNC 3-axis vertical mill. Anilam Crusader II control with Program Saver. Longitudinal Table Travel 34″; Cross Trave 12″; Vertical Knee Travel 16″; Ram Travel 12″. Spindle Speed Range: 60 to 4200 RPM Infinitely Variable Spindle Taper: R-8 Spindle Travel: 5 with (3) Feeds. 0053 IPR Head Tilts Front and Back: 45 Degrees Head Swivels Left and Right: 90 Degrees Includes: One Shot Lubrication System; Meehanite Machine Casting; (2) Adjustable Table Stops; Quill Handle, Manual Tool Draw Bar. Under Power or Operable. Anilam Crusader II with Program Saver. Max Weight of Work Piece. The item “SUPERMAX YCM 1-1/2 VS CNC 3-AXIS KNEE MILL WITH ANILAM CRUSADER II CONTROL” is in sale since Friday, June 10, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “tnt_industrial” and is located in Fountain Valley, California. This item can be shipped to United States.

• Brand: Unbranded/Generic
• MPN: Does Not Apply