Direct replacement for FANUC A02B-0094-C041 CRT monitors. The package includes following items. 1 piece of 14 inch industrial LCD screen with mounting bracket. 1 piece of video signal adapter cable. Power supply with power cord. It is time to replace your old CRT monitors with the new high quality LCD industrial monitors. If the monitor you need is not in my store, just ASK! UPS overnight service is available, choose UPS overnight when you check out. Thank you for supporting American small business!

Direct fit, no need to drill and tap holes for mounting the LCD monitor. The package includes following items. 1 piece of 14 inch industrial LCD screen with mounting bracket. 1 piece of video signal adapter cable. Power supply with power cord. It is time to replace your old CRT monitors with the new high quality LCD industrial monitors. If the monitor you need is not in my store, just ASK! UPS overnight service is available, choose UPS overnight when you check out. Thank you for supporting American small business!

The package includes following items. 1 piece of 14 inch industrial LCD screen with mounting bracket. 1 piece of video signal adapter cable. Power supply with power cord. It is time to replace your old CRT monitors with the new high quality LCD industrial monitors. If the monitor you need is not in my store, just ASK! Thanks for supporting our business!

Kitamura MYCENTER-1XiF SPARK CHANGER CNC Machine 2002. The Fanuc control, including the following items will be removed from the machine. The rest of the machine, including, but not limited to, wiring and magnetic cabinet, relays and contactors, motors and pumps, spindle, tool changer, coolant tank, etc. 1- Fanuc front screen and Fanuc keypads on the front panel. These are circled in red in the pictures. 2- Fanuc servo amplifier, Fanuc spindle amplifier, Fanuc power supply, Fanuc I/O. Basically, the yellow modules circled in red in the picture. 3- Cabling between items 1 and 2. 4- Encoder from the back of servomotors for X, Y, and Z directions. The Fanuc motors for tool changer and for the pallet changer are not touched. For retrofit, you need all motor, typically, however, depending on the control you use, a particular type of encoders will be needed to be mounted on the back of the motors. Feel free to reach us with your questions. The machine weight is 11,500 lbs (just scrapping the machine leads to a significant number). Table Load Capacity: 220lb. Travel: 20″ for X Axis, 14″ for Y Axis, 16 for Z Axis. Spindle Speed: 15,000 RPM. Rapid Feed Rate: 1968 ipm for X and Y Axes, 1417 ipm for Z. Cutting Feed Rate: 0 to 1417 ipm for all axes. Automatic Tool Changer with 30 Tools. Spindle Motor Power: 10hp. Coolant Motor Power: 1.6hp. Lubricant Motor Power: 2/75hp. Hydraulic Motor Power: 1hp. Machine Weight: 11,500lb. 2-Station Rotating Pallet Changer (Spark Changer). High Pressure Cooland (HPC). All manuals including electric and hydraulic schematics, as well as parts, maintenance, and operation manuals are available and come with the machine. The unit was well maintained, running aluminum parts. Vektek Hydraulic Work holding Pump With 2 x 5 Chick Hydraulic Vise is included in the price. We can load the machine on your flatbed for free. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “direct_drive_robotics_llc” and is located in this country: US. This item can be shipped to United States.

• Model: MYCENTER-1XiF
• Spindle Horsepower: 10 hp
• Machine Type: Machining Center
• Model Year: 2002
• Power Source: Hydraulic
• Control: CNC

Bridgeport Boss model # R2E3 3 axis CNC milling machine. Centroid M-39 control retrofit. 15″ x 38″ table. Monitor and controller power supply recently replaced. 2 HP 3 phase 220v Currently running on a 20 amp circuit. Bridgeport original manuals and Centroid manual included. No automatic tool changer. Centroid conversational programming is very easy to learn. G code programs can be input through RS232 port with. USB/serial null modem cable (included). Upgrades are available from Centroid. We run this machine almost daily and have no issues with it. The 3 vises shown in pictures are not included. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “mar809635″ and is located in this country: US. This item can be shipped to United States.

• Model: M39
• Spindle Horsepower: 2 hp
• Machine Type: Vertical Milling Machine
• Table Length: 35 in – 39.9 in
• Max Spindle Speed (RPM): 2501 – 3000
• Power Source: Electric
• X-Axis Travel Bed: 31 in – 35 in
• Y-Axis Travel Bed: 10 in – 15 in
• Function: Drilling, Milling
• Brand: Bridgeport
• Table Width: 15 in – 19.9 in
• Control: CNC
• Voltage: 230 V

Bridgeport Series 1, (Incomplete) Variable Speed Head (Hurco KM-1). NO CONTROL is included. Please feel free to make a reasonable offer! MUCH MORE TOOLING than shown IS INCLUDED (see specifics below). OEM OWNER, SERVICE, PROGAMMING & OPERATOR Manuals are. OEM Conversational Training, Volumes One AND Two are. Tool set up block and spindle tool locknut wrench are. Cover shown at left of base is for the X Axis Servo, and is included. This machine is a very good candidate for RETROFIT, or to upgrade your worn base, by swapping some parts between the two. What is shown is what you get, PLUS MORE TOOLING!! PLEASE LOOK CLOSELY at the PICTURES, as they are a major part of the description. Standard Bridgeport Mill, with BALL SCREWS instead of standard. Controller went bad and is no longer with the machine. (3) Servos included; Condition unknown. Operational when Control failed. 9×42 Standard Bridgeport table (surface rust). Kwik Switch 200 spindle. (25) Assorted Tool Holders – Some with Drill Chucks, Some for (2) sets Collets. (24) Small (Acura Flex) Collets. (31) Large (Acura Flex) Collets. Can ONLY be picked up by your shipper, at our facility, A Basic Pallet will be included. Look VERY CLOSELY at the pictures, as they are a major part of the item description. The item “Hurco KM-I CNC Bridgeport Knee Mill for RETROFIT, or Repair NOT FUNCTIONAL” is in sale since Thursday, May 27, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “buyselltradeu” and is located in Richmond, Virginia. This item can’t be shipped, the buyer must pick up the item.

• Machine Type: CNC Kneew Milling Machine
• Spindle Taper: Kwik Switch 200
• Function: Drilling
• Brand: Hurco – Bridgeport
• Control: CNC

Dyna Myte DM2400 CNC Vertical Milling Machine + Retrofit Kit Excellent Condition. Mill is set up as it originally was. I never installed it. You could keep it as it is and work with DYNA Language as it is explained in the Original manuals that go with the Mill. Or you can install the retrofit kit and get much more power and use any G code based programs to run her. The Mill has had VERY Little use. It was originally just used for light engraving by the original owner, the second owner never used it and I have only used it once to try it out in15 years. The table looks new. All the paint is original and hardly any signs of ware. The plastic oiler hose has dried and cracked and the accordian chip guard has also died with age and needs replacement. The oiler works fine. The Retrofit Kit has power supplies and control boards for 4 axises. Four new Stepper motors, and wire to connect them. Manuals for how to do the retrofit are included. There is no fixture for the 4th axis, but there is the motor and controller for it. This is in beautiful condition. The table and ways look new. If you would like any more pictures or questions please feel free to ask. The pictures show the condition and I can take as many more as you wish. I have not seen a nicer one anywhere. I can help you load it in your car in Plaistow, NH 03865 that is on the Massachusetts and New Hampshire line just an hour north of Boston. I can bolt it to a pallet for free. The item “Dyna Myte DM2400 CNC Vertical Milling Machine + Retrofit Kit Excellent Condition” is in sale since Monday, September 28, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “photoartistt” and is located in Plaistow, New Hampshire. This item can be shipped to United States.

• Model: DM2400
• Modified Item: No
• Country/Region of Manufacture: United States
• Custom Bundle: No
• Machine Type: Vertical Milling Machine
• Max Spindle Speed (RPM): 7501 – 10000
• MPN: DM2400
• Non-Domestic Product: No
• Function: Drilling
• Brand: DYNA MECHTRONICS INC
• Control: CNC

EMCO VMC100 CNC completely retrofit with Centroid Acorn. This machine was acquired in almost NOS condition and retrofit utilizing the best available components to bring it to modern technology and accuracy. All axis have top tier DMM Dyn4 servos, Centroid Acorn touchscreen controller, all electronics are built into the back of the machine, variable speed centroid controlled original motor, encoder for threading, automatic oiler! And just take a look at the condition of the beds! Tool changer includes all ER16 ball bearing factory tool holders that cost more than the price I’m asking for the machine alone. The item “EMCO VMC100 CNC milling machine Centroid Acorn complete retrofit” is in sale since Monday, August 31, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “ropestitch” and is located in Charlotte, North Carolina. This item can’t be shipped, the buyer must pick up the item.

• Model: VMC100
• Country/Region of Manufacture: Austria
• Machine Type: Milling Machine
• Power Source: Electric
• Brand: Emco
• Control: CNC
• Voltage: 220 V

Republic-Lagun CNC 310 Milling Machine For Retrofit. Mechanically this machine is in very nice condition. The control system had an issue so we removed it in order to do a retrofit but we are moving now, and do not have room for it. Ball screws are good, table is excellent, and was heavily oiled to protect it. Machine is located in Rolla MO at Absolute machine shop. Obviously it will depend on your location. Please see last photo for specifications. We can load this machine free of charge. The item “Republic-Lagun CNC 310 Milling Machine For Retrofit Machmotion Mach3 Emc Lynux” is in sale since Tuesday, May 26, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “lauranna80″ and is located in Rolla, Missouri. This item can be shipped to United States.

• Brand: Republic-Lagun
• Machine Type: Milling Machine
• Function: Milling
• Spindle Taper: #40NMTB
• MPN: KMC 310-S
• Control: CNC

Our motion controllers can be used in a multitude of applications and one such application is for the retrofitting of old milling machines. There are many robust machines still in use around the world today that need not be replaced if only the electrics and controller was upgraded. Using our own control systems with their years of proven history for accuracy and repeatability we have many features available. Creation of code sub-routines. Name and Recall Programs. 1 x MAP Software. 1 x PMC CNC Motion Controller. 1 x Mounting Arm. 1 x Set Controller Interconnecting cables. 1 x Start/Stop Switch Set with contact blocks. 1 x Electrical Cabinet. 2 x Proximity Sensors. 2 x Sensor Extension Leads. 2 x Sensor Mounting Brackets. 2 x DC Servo Motor 1.6Nm. 2 x Encoder 1000ppr. 2 x Pulley Sets. 2 x Timing Belts. Pen Drive with Manuals & Software License. All delivered tested and ready to plug in. Any Questions please ask. The item “CNC Retrofit Kit Milling Machine, Lathe etc” is in sale since Wednesday, April 17, 2019. This item is in the category “Business, Office & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “control-systems-online” and is located in Southport, Lancashire. This item can be shipped worldwide.

• MPN: Kit
• Brand: TRM