Wheeler Machinery Sales, Inc. 247 Pacific St Pomona CA 91768. Financing Available / Se Habla Español. FP 1, DECKEL, 8″ x 24″, Tbl. Our stock number: 5532. Comes with one Cat 40 Collet Holder and collets. Did not receive any other tooling with machine. Table Size: 8 1/4″ x 23 1/4″. Spindle Speed (Low): 40 RPM. Spindle Speed (High): 2000 RPM. Motor: 1.3/1.9 HP. Electrics: 220/440V, 3PH, 60Hz. The item “DECKEL FP1 MILLING MACHINE VERTICAL HORIZONTAL” is in sale since Monday, February 24, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “wheelermchy” and is located in Pomona, California. This item can be shipped to United States.

• Machine Type: Milling Machine
• Brand: DECKEL

Friedrich Deckel FP1 Milling machine with NC control. This is a quality German made mill. Very accurate and works properly. I never used the NC control so cant speak for that. I have a set of collets which will come with the machine. The item “Friedrich Deckel FP1 Milling machine with NC control” is in sale since Friday, December 27, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “fabmannc1969″ and is located in Reidsville, North Carolina. This item can’t be shipped, the buyer must pick up the item.

• Machine Type: Milling Machine
• Function: Milling

All are in very good to excellent condition. Both universal tables include all tramming indicators and covers. The second table came off an FP4NC machine. They both have 14mm t-slots. The slotting head was rebuilt by Franz Singer in Germany. The milling machine is NOT a servo driven ball screw machine, but has acme lead screws that allows for free-cranking manual machining along with programable linear movements. It has a 40 year old control that still runs (machine is currently under power,) but may be difficult to find parts for should it fail. Most of the value in this group are in the two tables and the slotting head which may all be used on various manual and NC Deckels. Contact for more pictures. The item “Deckel FP3A Mill + Slotting Head + 2 Universal Tables” is in sale since Thursday, November 21, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “bramu” and is located in Ferndale, Michigan. This item can’t be shipped, the buyer must pick up the item.

• Country/Region of Manufacture: Germany
• Machine Type: Milling Machine
• Max Spindle Speed (RPM): 2500
• Model Year: 1981
• Power Source: Electric
• X-Axis Travel Bed: 20 inch
• Y-Axis Travel Bed: 12 inches
• Z-Axis Travel Bed: 16 inch
• Spindle Taper: 40 Taper with DIN Pull Stud
• MPN: FP3A
• Function: Drilling
• Brand: Deckel
• Control: CNC
• Voltage: 230 V

Vertical and horizontal spindles use no. 40 tooling DIN 2080 (some included) X / Y / Z axis travels are 17.7 / 12 / 13.7. 230 volts, 3 phase input. Backlash in X =. 004 / Y =. If not for a little paint off in bottom of chip pan I would have surmised this mill was never used. Only curiosity is an area where the Z axis plastic hand wheel have been notched (see photo). Original paint, spindles sound quiet as new. Tooling included- 4 pieces no. 40 / ER collet style. Banded to skid and loaded at no charge. The item “Emco FB-4 Deckel style milling machine New lower price” is in sale since Tuesday, September 17, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “procyon-machine” and is located in Ridgeland, South Carolina. This item can be shipped to United States.

Deckel FP4M CNC SERVO II Universal Milling Machine Vertical Horizontal Mill Nice. This Machine Runs Good and can be inspected in our warehouse. You can contact me at. 8I8 44I – 894I. If you have any questions. Please see pictures for additional details. The item “Deckel FP4M CNC SERVO II Universal Milling Machine Vertical Horizontal Mill Nice” is in sale since Monday, September 25, 2017. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “amiron11″ and is located in Oxnard, California. This item can’t be shipped, the buyer must pick up the item.

• MPN: Does Not Apply
• Brand: DECKEL
• Model: FP4M
• UPC: Does not apply

1980′s Deckel FP2 with universal table. All inch dial/scale machine (alternativly, can display in metric on the DRO of course) built for USA market, 230 volts. Note original Heidenhain TNC 113 DRO was replaced with Positip model so that all 4 axis can be displayed on one screen. Also note how the install was true to Deckel original flex conduit, boxes for same. Even the work light is properly integrated into the body and wiring. Excellent condition, backlash in X axis is. 008, quiet and cool running….. One can run the machine for 40 minutes at highest RPM and both spindles feel as cool to the touch as they did before starting the machine. Integral variable speed DC drive X/Y/Z axis works perfectly in milling at all speeds, and rapid modes. Spindle drawbars are for external thread SK40 tools i. What Deckels usually use but I can change them to 5/8 internal thread standard no. 40 tooling drawbars, if you prefer. Orange vise shown in photo is not included. Universal table rotates 360 degrees via three speed transmission, with integral encoder (C axis on DRO) and tilts two directions via screws. Note original Deckel dial indicators for quick re tram back to zero degrees. Paint is 95% original… I did touch up a small area near the base on the right side, all else is original paint in excellent condition. To me it seemed better to have a proper modern display that can display up to 6 axis and is still supported by Heidenhain. See my feedbacks for indications I tell it like it is. The item “Deckel FP2 with Universal Table and Positip 6 axis DRO” is in sale since Tuesday, December 11, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “procyon-machine” and is located in Ridgeland, South Carolina. This item can be shipped to United States.

• Modified Item: No
• Custom Bundle: No
• Non-Domestic Product: No

MAHO MH – 600P UNIVERSAL MILLING MACHINE. FEATURES HEIDENHAIN TNC-121 READOUT. INCLUDES TOOLING AS PER PHOTOS AND OPERATING MANUAL. TOOL CABINET IS NOT INCLUDED. VOLTAGE 220 VOLTS 3 PHASE, 7 KW. WE CONNECTED POWER TO THE MACHINE. THE MAIN MOTOR RUNS BUT UNABLE TO RUN THE FEEDS (THE REASON UNKNOWN). OTHERWISE LOOKS LIKE THE MACHINE HAVEN’T BEEN USED MUCH. The item “MAHO MH-600P (DECKEL) UNIVERSAL MILLING MACHINE WITH HEIDENHAIN TNC121 READOUT” is in sale since Thursday, November 8, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “abmachinery” and is located in Saint-Laurent, Quebec. This item can be shipped to United States.

Deckel GK21 Pantograph and Additional equipment. Pantograph, Model: GK21, three different table sizes, owner’s manual, and a full kit which includes: number molds, letter molds, drill bits of various sizes. The equipment has been used very carefully and has been cared for and maintained to a very good condition and quality, it is likely that this is the GK21 in best condition on the market. Please message for more details, inquiry, and acquisition. Item Location: San Luis, Lima, Peru. The item “Deckel GK21 Pantograph Shipping available upon request” is in sale since Thursday, May 14, 2015. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “davrusdavi” and is located in Miami, Florida. This item can’t be shipped, the buyer must pick up the item.

• Country/Region of Manufacture: Germany
• Brand: Deckel
• Model: GK21

For parts or retrofit, all servo motors , and measuring scales and main motor good, you can call for more info 6193069711 I can load for free, tnx. The item “Deckel mill” is in sale since Thursday, October 4, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “tinafeda” and is located in San Diego, California. This item can’t be shipped, the buyer must pick up the item.

Deckel FP1 with Deckel tooling cabinets and accessories. Note any photos that show the display less than crystal clear are a digital camera illusion… In real life the display numbers appear as sharp at a distance as it does in the closeup photo. 40 spindles (including the high speed head), metric dials (DRO displays inch or metric of course) , 220 volts, 3 phase. See photos for tooling and accessories… Includes index head (with 3 jaw chuck, self centering vise and overarm), high speed head, standard angular table, tilt swivel table, slotter head, horizontal overarm. Machine runs as quiet as any Deckel mill I have ever owned (and I’ve owned more than a dozen), low axis backlash, very nice. See my feedbacks for indications I tell it like it is. The item “Deckel FP1 dial type mill milling machine and cabinets of accessories” is in sale since Tuesday, September 18, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “procyon-machine” and is located in Ridgeland, South Carolina. This item can be shipped to United States.