Untested Dyna Myte 2400 Hobby Benchtop Mini CNC. Travel is around 6″x 5″y 4z. Dimensions around 26″ x 26″ x 28. Weight around 300 lbs. 15 amp, 120 volt. The item “Dyna Myte 2400 15A 120V Hobby Benchtop Mini CNC Milling Machine AS-IS” is in sale since Wednesday, November 7, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “bradssurplus” and is located in Woodland, Washington. This item can be shipped to United States.

• Brand: Dyna Myte
• Model: 2400
• MPN: Does Not Apply

This is a used Dyna Myte DM2400. We powered up the unit and ran the spindle in manual mode. The display powers up. We did not test any further. The rubber oil line is missing. There is a cover missing on the rear. The unit is in good condition with normal use marks. 48 x 40 x 36. The item “Dyna Myte DM2400″ is in sale since Wednesday, August 15, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “88ford” and is located in Staunton, Virginia. This item can be shipped to United States.

• Model: DM2400
• Modified Item: No
• Country/Region of Manufacture: United States
• Custom Bundle: No
• MPN: DM2400
• Brand: DYNA MECHTRONICS INC
• Non-Domestic Product: No

Untested Dyna Myte 2400 Hobby Benchtop Mini CNC. Travel is around 6″x 5″y 4z. Dimensions around 26″ x 26″ x 28. Weight around 300 lbs. 15 amp, 120 volt. The item “Dyna Myte 2400 15A 120V Hobby Benchtop Mini CNC Milling Machine AS-IS” is in sale since Tuesday, October 9, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “bradssurplus” and is located in Woodland, Washington. This item can be shipped to United States.

• Brand: Dyna Myte
• Model: 2400
• MPN: Does Not Apply

Dyna Myte 2400 Cnc milling machine. 6 x 6 x 6 work area. The item “Dyna Myte 2400 CNC Milling Machine” is in sale since Saturday, August 18, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “madx776″ and is located in New York, New York. This item can’t be shipped, the buyer must pick up the item.

• Brand: Dyna Myte
• Model: 2400
• Country/Region of Manufacture: United States

Dyna Myte 2400 Cnc milling machine. 6 x 6 x 6 work area. The item “Dyna Myte 2400 CNC Milling Machine” is in sale since Wednesday, July 18, 2018. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “madx776″ and is located in New York, New York. This item can’t be shipped, the buyer must pick up the item.

• Brand: Dyna Myte
• Model: 2400
• Country/Region of Manufacture: United States

Dyna Myte DM-2800 CNC Mill BENCHTOP with MachMotion Retrofit Excellent condition, 10k spindle, BT30 quick change toolholder, MachMotion PC Control, easy to program and operate. Operates on 110 V, Single Phase, 50/60 Hz MachMotion – Operator Interface Panel with Mach3 control software PC is onboard, no external pc needed. PC is running windows XP and 15 LCD touchscreen monitor. CNC operator panel with handwheel- really nice feature Keyboard, and mouse Boards are PMDX with gecko drives Features: DM-2800 mill MachMotion PC control system Includes: Dyna Myte DM-2800 CNC Machine Mach 3 software installed and working Bijur Oiling system Tooling – Qty 3 bt-30 ER-16 tool holders (no er-16 collets), machinest vise, magnetic base indicator Coolant pump with reservoir Small air compressor (not shown) Minor Issues. Original digital rpm meter (dyna mechtronics) built into the spindle functions. Its not connected to the control system in any way, so it doesn’t affect the mill performance. Works after cycling power. Maybe can be repaired. It can be disconnected without affecting Mach3 or any function of the mill. Some smaller holes (last pic) in the original electrical enclosure from the conversion where items were removed/replaced. These can be plugged or taped. Please inquire for alternatives. Any more than you enjoy receiving unacceptable product. We want your shopping experience to be as satisfying for you as it is for us. Check our feedback, we take pride in our auctions. The item “Dyna Myte DM-2800 CNC Mill BENCHTOP with Touchscreen/Mach3/MachMotion Retrofit” is in sale since Wednesday, May 9, 2018. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “quality_surplus_products” and is located in San Diego, California. This item can’t be shipped, the buyer must pick up the item.

• MPN: DM-2800
• Brand: Dyna Myte

It is either the DYNA or the MINITECH. In addition There is a spindle mounting bracket that was made for this unit if you want to change the spindle all-together. Machine has been upgraded to USE MACH3/4 The base unit and frame is Dyna 2400 which includes the Acme Screws. Spindle motor is from a 2200 model. This DYNA Mill has the following specs. Frame chassis is 2400 model. The Spindle Motor is from 2200. It has a new drive electronics for X, Y, Z, A axis, each axis has 6amp drivers “Made In USA”. Approximate X=5″, Y=4″ & Z =4 travel. The oil reservoir is mounted on the base (original pictured) and is a push to dispense type plunger. One shot and the system lube all axis ways. The steppers are new and they are Chinese and seems to work well. All X, Y, and Z movement error is 0.05mm. The spindle responds to program ON/OFF gcode. Let us talk about something you may be concerned about as I would be. The table is tested for linearity and it seems to keep excellent Z axis distance from the table at almost every point on the table except some dings here and there. Such accuracy should give user a very good result where an equal depth channel needs to be milled in to work piece. There is one drill mark (point) on the table as seen on the picture. I used this machine manly for PCB cutting at slow FR. The unit was repainted when I was in NJ and the job is not that great. The spindle retains the original specification as shown in the picture. The spindle RPM is maxed out at 10K and uses a spindle motor from 2200. There is hardly anything in this unit to do except plug and run. The CNC machine has 4th axis fully functional. The 4th axis can drive a stepper motor as much as 6.0Amp max. The unit has an isolation transformer which is wired so it can be turned off from the rocker switch. The unit does not needs cleaning but spindle might require repacking. Remember DYNA says the spindles does not need any service. All Axis limit switch work as they should. All switches are original. All other buyers around the US can use any trucking system of their choosing. I will have the unit ready for trucking in a wooden like box container and then wrapped with plastic to protect it from rain while in transition. See the box picture. The item “Dyna 2400/2200 CNC Mill 4 axis MACH3/4 ready Made In USA 1/16 micro-step more” is in sale since Thursday, January 25, 2018. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “empire9876″ and is located in Charlotte, North Carolina. This item can be shipped to United States.

No tools included Single front pump Lubrication which is rare among these units. There are three dings on the table. Each about 4mm diameter size in width and depth of may be about. So you think you can modify this to some MACH3 compatible 1/32 micro-stepping table top cnc. See the box picture. All other buyers around the US can use any trucking system of their choosing. I will have the unit ready for trucking in a wooden like box container and then rapped with plastic to protect it from rain in transition. This baby needs a lots of cleaning, lubricating and then put back together which will take a good bit of time. If you do have question, please ask. The item “Dyna Myte 2400 Bench Vertical CNC with 3th Axis original Read detail” is in sale since Saturday, November 12, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “empire9876″ and is located in Charlotte, North Carolina. This item can be shipped to United States.

• Brand: DYNA
• Country/Region of Manufacture: United States
• Model: 2400

Work Table 13″ x 6″ x Axis Travel 6.2″ y Axis Travel 5.00″ z Axis Travel 4.00 Power 120 volt 60H single phase via isolation transformer (must) Spindle motor 0.5 H. No tools included Single front pump Lubrication which is rare among these units. There are three dings on the table. Each about 4mm diameter size in width and depth of may be about. So you think you can modify this to some MACH3 compatible 1/32 micro-stepping table top cnc. See the box picture. All other buyers around the US can use any trucking system of their choosing. I will have the unit ready for trucking in a wooden like box container and then rapped with plastic to protect it from rain in transition. This baby needs a lots of cleaning, lubricating and then put back together which will take a good bit of time. If you do have question, please ask. The item “Dyna Myte 2400 Bench Vertical CNC with 3th Axis original Read detail” is in sale since Wednesday, October 12, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “empire9876″ and is located in Charlotte, North Carolina. This item can be shipped to United States.

• Brand: DYNA
• Country/Region of Manufacture: United States
• Model: 2400