Table: 8.25″ x 28.5″. Cross travel: 7.25. 12 Spindle speeds: from 100 to 2,500 rpm. Spindle: Takes R8 collets (1/2 drill chuck installed). On stand w/ cabinet & tray built in. Motor: 2hp 115/230v 1ph. 3′ 3″W x 3′L x 6′ 1″H. We’ll do our best to get you the lowest rate possible. We also allow local pick-up here at our facility in Hugo, MN 55038. We can load at no extra cost. Also machines can be inspected under power here at our facility in Hugo, MN 55038. Thank you for looking! The item “Enco 105-1110 Mill Drill 8.25 x 28.5 Table 1/2 Drill Chuck” is in sale since Wednesday, December 18, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “interplant” and is located in Hugo, Minnesota. This item can be shipped to United States, Canada.

• Make: Jet
• Type: Manual, Vertical
• Highest Spindle Speed (RPM): 2,500
• Model: 105-1110
• Spindle Horsepower: 2
• Machine Type: Mill Drill
• Table Length: 25 in – 29.9 in
• Model Year: Unknown
• Power Source: Electric
• X-Axis Travel Bed: Less than 10 in
• Y-Axis Travel Bed: 16 in – 20 in
• Spindle Taper: R8
• Function: Drilling
• Brand: ENCO
• Table Width: Less than 10”
• Control: Manual
• Voltage: 115/230v

Tested and in Excellent Running Condition! 110 / 220 V. 7.8/15.5 A. Comes with Enco Steel Cabinet which it mounts to (in picture). All information deemed accurate but may vary from model to model. For any questions you may have.. Four Zero One – Nine S. Fast Application, its all filled in for you.. Online leasing applications get. Please Note: Not all machines may qualify for Leasing. We accept all Major Credit Cards, Bank Wires, Company and Personal Checks. We always get better rates. Just include the zip code when inquiring and if you have a loading dock or ground level with forklift. CONDITIONS: All quotations are for immediate acceptance. They are subject to withdrawal, change and prior sale without notice. All orders received are binding only when they have been accepted and acknowledged by us in writing. Unless otherwise specified, prices quoted are F. Care is taken to give reliable specifications, but these are not guaranteed. We reserve the right to correct typographical errors. INDEMNIFICATION: Used Machines may not incorporate approved activating mechanisms, operator safety devices or safety guards as required by OSHA or otherwise. It is the user’s responsibility that the said machines be so equipped and safeguarded to meet OSHA and any other requirements before placing such machinery into operation. The item “Enco 2 Hp Vari-Speed Milling Machine with Enco Cabinet 110V Great For Garage” is in sale since Friday, November 8, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “palmtreespecialties” and is located in Providence, Rhode Island. This item can be shipped to United States.

• Model: YL-90L-4
• MPN: YL-90L-4
• Brand: Enco
• UPC: Does not apply

Enco knee milling machine 6×28 table. Has vertical head like a Bridgeport 110volt with back gear and r-8 with dro and microfeed on the quill. Has horizontal spindle with 110volt motor, gearbox, arbor support and r-8 spindle. Includes nice 5 swivel vise, 5ea r-8 collets, misc hold downs, grizzly drill chuck and one arbor with draw rod for the horizontal attachment. Backlash is minimal, table has some mill marks, the mill runs fine all functions work. Vertical head has a little gear whine but runs fine. This machine can be picked up from my shop which is 10 miles south and east of downtown Saint Louis, Missouri, forklift loading is free. Please check out my other auctions. Call three one four seven five zero one four zero three with questions. Items not picked up within 60 days will be resold. The item “Enco 6×28 Knee Milling Machine Horizontal And Vertical 110 Volt With Tooling” is in sale since Wednesday, November 13, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “ddmo1″ and is located in Millstadt, Illinois. This item can be shipped to United States.

• Machine Type: Milling Machine
• Function: Milling
• Brand: ENCO

Tested and in Excellent Running Condition! 110 / 220 V. 7.8/15.5 A. Comes with Enco Steel Cabinet which it mounts to (in picture). All information deemed accurate but may vary from model to model. For any questions you may have.. Four Zero One – Nine S. Fast Application, its all filled in for you.. Online leasing applications get. Please Note: Not all machines may qualify for Leasing. We accept all Major Credit Cards, Bank Wires, Company and Personal Checks. We always get better rates. Just include the zip code when inquiring and if you have a loading dock or ground level with forklift. CONDITIONS: All quotations are for immediate acceptance. They are subject to withdrawal, change and prior sale without notice. All orders received are binding only when they have been accepted and acknowledged by us in writing. Unless otherwise specified, prices quoted are F. Care is taken to give reliable specifications, but these are not guaranteed. We reserve the right to correct typographical errors. INDEMNIFICATION: Used Machines may not incorporate approved activating mechanisms, operator safety devices or safety guards as required by OSHA or otherwise. It is the user’s responsibility that the said machines be so equipped and safeguarded to meet OSHA and any other requirements before placing such machinery into operation. The item “Enco 2 Hp Vari-Speed Milling Machine with Enco Cabinet 110V Great For Garage” is in sale since Sunday, April 28, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “palmtreespecialties” and is located in Providence, Rhode Island. This item can be shipped to United States.

• Model: YL-90L-4
• MPN: YL-90L-4
• Brand: Enco
• UPC: Does not apply

ENCO Mill / Drill Machine Model: GL-30B. Small Tools Inventory #: S21907 Details: – Brand: Enco – Type: Milling & Drilling Machine – Model: GL-30B – Serial #: 2427 – 9 Spindle Speeds: 260 – 2130 RPM. Spindle Taper: R8. Spindle Travel: 6. Table Size: 8″ x 29″. Dials on Table X & Y Adjustment in. Y Axis Table Travel: 6-1/2. X Axis Table Travel: 17. Head is Adjustable Up & Down. Maximum Distance Spindle to Table: 17. Comes With 28″ x 30″ Heavy Duty Table. Disconnect Box Mounted to Table. New spindle bearings installed Elect. Specs: – HP: 2 – Volts: 220 – Phase: 3 – Cycle: 60. We look forward to doing business with you. The item “ENCO Mill / Drill Machine Model GL-30B” is in sale since Monday, August 5, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “smalltoolsinc_cleveland” and is located in Euclid, Ohio. This item can be shipped to United States.

• Brand: ENCO

Enco knee milling machine 6×28 table. Has vertical head like a Bridgeport 110volt with back gear and r-8 with dro and microfeed on the quill. Has horizontal spindle with 110volt motor, gearbox, arbor support and r-8 spindle. Includes nice 5 swivel vise, 5ea r-8 collets, misc hold downs, grizzly drill chuck and one arbor with draw rod for the horizontal attachment. Backlash is minimal, table has some mill marks, the mill runs fine all functions work. This machine can be picked up from my shop which is 10 miles south and east of downtown Saint Louis, Missouri, forklift loading is free. Please check out my other auctions. Call three one four seven five zero one four zero three with questions. Items not picked up within 60 days will be resold. The item “Enco 6×28 Knee Milling Machine Horizontal And Vertical 110 Volt With Tooling” is in sale since Thursday, April 4, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “ddmo1″ and is located in Millstadt, Illinois. This item can be shipped to United States.

Excellent condition, not used much. Mounted on a solid metal cabinet. The item “ENCO 105-1100 BENCH TOP MILLING & DRILLING MACHINE” is in sale since Monday, April 22, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “machinery-used” and is located in Mahopac, New York. This item can be shipped to United States.

• Model: 105-1100
• Brand: ENCO

Heavy duty Enco miller with 3 axis sony dro and mill vise. Machine is still in use if you want to test it out. Includes machine, vise , Sony 3 axis Dro, collets, tiedowns. The item “Enco Milling Machine” is in sale since Friday, April 12, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “mmcc3653″ and is located in Williston, Florida. This item can be shipped to United States.

Enco Variable Speed Vertical Milling Machine 9 x 42 manual table one shot lube variable speed head nice machine I can load the machine onto an open truck/trailer I WILL NOT SKID THIS MACHINE. The item “Enco Variable Speed Vertical Milling Machine” is in sale since Monday, March 26, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “lurby” and is located in Wallingford, Connecticut. This item can’t be shipped, the buyer must pick up the item.

I have this benchtop sized milling machine for sale. This is an Enco mill, with a 1hp 110V motor. It was made in 1981, and is one of the older made in Taiwan machines. The spindle is R8, so tooling is easy to find. The stand is solid and included with the sale. It’s quite a capable little mill, and with it being 110V, it’s easy to use at home. The previous owner had it sitting in a basement for quite some time. It was way back in a corner, I don’t think it had much use when I got it. This mill is fairly easy to move, weighing around 600lbs I think. I have taken it apart for moving before, and I can help you do that, or we can load it into your truck using my engine hoist. I can even help deliver and set it up for the asking price if it’s not too far. Please contact me if you would like to come look at it before purchasing. The item “Enco Mill Drill Milling Machine” is in sale since Monday, June 11, 2018. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “superman22x” and is located in Farmington, Michigan. This item can’t be shipped, the buyer must pick up the item.

• Model: DB-1000VS
• Brand: Bridgeport
• Country/Region of Manufacture: United States
• Bundle Listing: No
• MPN: DB1000VS