Travels X41.34 Y22.05 Z18.11. Rapids X, Y 1575 Z 1262. Cat 4o Big Plus. Machine weight 16,500. 4800 spindle cut time. All specs must be verified by purchaser.
Comments Off
Haas 93-24-0032A Ballscrew for VF-2SS Y or Z axis. Screw fits either axis. Ballscrew is in excellent, like new condition, with excellent preload, screw had continual good lubrication throughout its life and was removed from a machine that was running good with no accuracy issues. Screw has great preload throughout the entire travel and no appreciable backlash. Restore accuracy to your machine for much less than the cost of a new screw from Haas.
Comments Off
BIG KAISER BORING HEAD #112.513 EWN04-7E-CK1!!!! BORING BAR DIAMETER IS. 140 ACROSS The FLAT!!!! 433(10.99 mm)!!! NEW SMALL BORING BAR INSTALLED INCLUDED!!! I ALSO HAVE NEW EXTENSION BAR SOLID CARBIDE SEPARATELY LISTED USED WITH THIS BORING BAR!!!! GUARANTEED TO MEET THESE STANDARDS!!!!
Comments Off
Volstro Rotary Milling Head R8 for Bridgeport NOS Excellent. From what I can tell this is unused in NOS condition. Listing as used as I cannot guarantee it was never attached to a machine and it does show signs of age and long term storage. It appears to have original manufacturers grease. I did wipe some of the external grease off and put a layer of thin foam in the case as sitting in grease for extended periods of time causes finish wear and staining. I checked all the adjustments and they were smooth but it may need some newer grease to make it silky. The keyway on the R8 shank looks new and the bolts on the clamp look like they have never been tightened. Only the accessories shown in photos are included. There are 2 new Schaublin E-25 Collets size 3/8 & 1/2. Please review all photos to determine condition and identification. These are very well made and it is hard to find one in this condition. Basically a backwards rotary table. The workpiece stays fixed and milling can be done with rotary and axial.
Comments Off
“Model/Year” MODELA model MDX-15.
Comments Off
Hurco Dynapath Delta 500-3 CNC Bed Mill. Work Table: 10 x 50? X Axis Travel: 32. Y Axis Travel: 16. Z Axis Travel: 22. Spindle Nose to Table: 0.75? 16.75? Spindle Speed: 704200 R. Spindle Motor: 3 HP. Spindle Motor: AC 3 HP. Machine Dimensions: 67″ X 63″ X 92. Machine is in excellent condition and it can be inspected under power at our warehouse in Independence, Missouri. Video link is above in the description.
Comments Off
Great Supermax milling machine. Always covered and hardly used in an ornamental iron shop. Head tilts in all directions and has auto feed for drilling. Comes with vise, collets, drill chuck and more. Please see pictures and ask any questions.
Comments Off
I have both a CNC converted Grizzly G0704 mill and CNC converted G0752 lathe. They are in excellent condition and working perfectly. It is run on Mach3 and the license is included. I have made this so you only need to change the connectors (aircraft type) to use the other machine. I used quality parts to do this conversion and it only has about 500 hours between them. I have also just gone thru them, made adjustments, calibrated, cleaned and greased them. They are ready to use. I will also include a lot of tooling, not enough photos allowed to cover it all, to many things for the listing. Way to many things to list, you can see more details on the Grizzly site for each machine. But I can negotiate the actual price up or down depending what your would like. I will also sell without tooling or with even more that I have. About 50+ end mills are also included, 25% or more are new. Note: The tools on the wall as well as the tool boards are also for sale, but separately, and not included with the mill and lathe. However, the black Craftsman box with tooling is included and only about 4 years old, ball bearing drawers. I also have many more photos, if you somewhat near Gold Canyon, AZ, it would be best to stop over and see all that is included. The last photo was made on my mill and is called a Turners Cube, very cool and lots of videos on YouTube. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “baxter7092″ and is located in this country: US. This item can be shipped to United States.
Comments Off
Very nice condition and includes table driven dividing head worth over 1200 alone. 12/30/2022 is last date to remove. Machine weight apprx 9000# Local forklift rentals are apprx 500.00 for a 10k lift. I have a 4000# lift truck on site but wont budge this. Balance within 7 days. Able size 315 x 1250 mmm. Tool size SK50, speed range (1/min) 28-1400. Travel (X/Y/Z) 850/270/505 mm. Feed range (mm/min) X, Y 16-800, Z 5-250. Total power consumtion 8 kW. Milling head tilteable +/- 45°, travel of pinion 90 mm. Rapid feed in 3 axis. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “rodbuilderswarehouse” and is located in this country: US. This item can be shipped to United States.
Comments Off
12T1B-1701981R01 T-Slot End Mill with Inserts Used Excellent Condition MPN: 3009081 Specs. Cutting Diameter: 1.795″ Cutting Width: 0.43″. Usable Length Max: 1.71″ Projection Length: 1.94″ Overall Length: 4.19 Eff. Teeth Periphery: 2″ Peripheral Insert Count: 4″ Neck Diameter: 0.87″ Shank Diameter: Weldon 1.250″ Coolant: No. T-Bolt Size: 1.00 Insert Style: APKT 160408.. (4 used included in the cutter). PKG QTY: 1 PC. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “cutting_edge_tool” and is located in this country: US. This item can be shipped to United States.
Comments Off
