This machine is in working condition. We run it on a daily basis for short cycle time parts where the pallet changer saves on load time. We are replacing it with a new Robodrill that we are in the process of automating with a robot. The spindle has been recently rebuilt, the tool changer and pallet changer work well, all three axes sound good, and it holds good tolerances. Check out the video below to see it running. Max rpm in the video is 15,000RPM but it runs fine at 20,000 as well. Fanuc Robodrill 21TiCL with pallet changer and 20,000rpm for sale – YouTube. Pallet change time is less than 7 seconds. Chip to Chip tool change time is less than 3 seconds. We can load it onto the truck at no cost. The item “2002 Fanuc Robodrill T-21iCL CNC Mill, Vertical Machining Center, Pallet Changer” is in sale since Saturday, November 24, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “wagnermachineco” and is located in Champaign, Illinois. This item can be shipped to United States.

• Make: FANUC
• Type: Vertical
• Control Type: Fanuc
• MPN: Does Not Apply
• Model Year: 2002
• Model: T21iCL
• X-Axis Travel Bed: 26” – 30”
• Z-Axis Travel Bed: 10” – 15”
• Y-Axis Travel Bed: 10” – 15”
• Highest Spindle Speed (RPM): Over 15000
• Modified Item: No
• Non-Domestic Product: Yes
• Country/Region of Manufacture: Japan

Have a machine or an entire facility to sell? Turn your surplus into CASH! Matsuura MC-760VX Vertical Milling Machine. Spindle Center to Column. Rapid Traverse Rate (X/Y/Z). Max Cutting Feed Rate. 10-HP Motor 220V / 3-Phase / 60Hz. 45.28″ x 16.14″. 25 – 4,500 RPM. 590 / 590 / 472 IPM. 1.9 Seconds Tool to Tool. 102″ x 118″ x 105 High. Fanuc Series O-M Control. Fanuc Red Cap Motors. Coolant Pump and Tank. Matsuura MC-760VX CNC Vertical Machining Center – YouTube. If any other information is needed to help you with quoting, please send us a message. Cash, wire transfers, or company checks are welcome and encouraged. This guarantee applies only to machines, which we own. Shall not be responsible for any damages done by truckers, riggers, or other parties. All machine prices include loading unless otherwise stated. Machinery descriptions are intended as a guide only and their accuracy is not guaranteed. There are no warranties which extend beyond the description of the face hereof. Quotations subject to change without notice. It is the buyers and users responsibility to provide proper safety devices, training and equipment to safeguard the operator from harm for any particular use, operation or set up, and to adequately safeguard the machine, or machines, to conform to all Federal, State and Local Government Safety Standards and All Industry Safety Standards. The item “Matsuura MC-760VX CNC Vertical Machining Center Fanuc Control, ID# M-021″ is in sale since Thursday, August 2, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “energ_machinery” and is located in East Hampton, Connecticut. This item can be shipped to United States.

• Spindle Horsepower: 10
• Table Length: 40” – 59.9”
• Model Year: 1991
• Type: CNC, Vertical
• Control Type: Fanuc
• X-Axis Travel Bed: 26” – 30”
• Y-Axis Travel Bed: 16” – 20”
• Z-Axis Travel Bed: 16” – 20”
• Highest Spindle Speed (RPM): 4001 – 4500
• Make: Matsuura
• Table Width: 15” – 19.9”

The HX8610 Vertical Machining Center is the second generation of the HX series and is an incredibly versatile, PC-based vertical machining center, suitable for all skill levels. It is perfect for machining plastics, woods, metals and more in a classroom, garage, or office environment. Because the HX8610 Vertical Machining Center is designed to operate on standard 120v power, phase converters or room modifications are not needed. The combination of a small footprint, full CNC capabilities, and affordable price make the HX8610 VMC an excellent solution for education, prototyping, and light production. The HX8610 VMC features a powerful three -stage. (max 9,000 RPM). Belt-driven, variable speed spindle motor that enables you to efficiently tailor your machine for heavy duty cutting and fine surface finishes. This machine comes equipped with 3-axis stepper motors, precision ACME lead screws with bronze nuts, USB-based motion control, and vivid LED work lighting. Single Phase 120 VAC 60 Hz Primary Power Requirement. 6-sided, Fully-Enclosed Powder Coated, Sheet Metal Enclosure. 6500K Daylight LED Work Lighting. Made in the USA. 9,000RPM 4/5HP R8 Spindle. 8″ x 6″ x 10 Work Capacity. Precision ACME Screws and Bronze Nuts. 380 oz-in NEMA 23 Stepper Motors. Rapid Feed Rates Up to 100 IPM. Machines Wood, Composites, Plastics, Aluminum, Steel, and More! EIA RS274-D Standard G & M Code Compatible. Autodesk Fusion 360 Ready. USB A-B Machine to Computer Interface. Please reach out to us and we’ll get you an. To see the machines in action, navigate to our Leading Edge Industrial YouTube Channel. The item “Desktop CNC Mill HX8610 VMC Autodesk Fusion 360, FANUC, CAD/CAM Compatible” is in sale since Thursday, April 4, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “ceitech2013″ and is located in Lafayette, Indiana. This item can be shipped to United States.

• Model: HX8610
• Modified Item: No
• Country/Region of Manufacture: United States
• Spindle Horsepower: Less than 1
• Custom Bundle: No
• Table Length: 15” – 19.9”
• Model Year: 2018
• Type: CNC, Vertical
• Control Type: Computer Numerical Control (CNC)
• Non-Domestic Product: No
• X-Axis Travel Bed: Less than 10”
• Y-Axis Travel Bed: 10” – 15”
• Z-Axis Travel Bed: 10” – 15”
• MPN: HX8610
• Highest Spindle Speed (RPM): 7501 – 10000
• Make: LEI
• Table Width: Less than 10”

2006 Fadal VMC 4020 Vertical CNC Milling Machine Center. In good working condition. Currently in use, making parts, and available to view under power. Chip Conveyor and Flood Coolant Tank. Floor to Table Surface. 0.687″ x 3.75″. Cutting Feed Rate, X/Y/Z. Rapid Travel Rate, X/Y/Z. 900(X/Y) 700(Z) ipm. 3,800 lbs thrust. Spindle Nose to Table. Spindle Center to Column Ways. ATC, Number of Tools. Machine Width x Depth. Power Requirement, 3 Phase. Specifications subject to verification. Items over 1000 lbs. We will not palletize, skid or crate an item over 1000 lbs. These items are prepared for transit by wrapping the item’s electrical components with stretch wrap and spraying down any exposed metal surfaces with protective oil. This is usually the case with top-heavy items, such as grinding machines. MACHINE DIMENSIONS: 120″ x 90″ x 115H. MACHINE WEIGHT: 10,500 lbs. We accept all major credit cards except American Express. Orders are not processed until theyre paid in full. The item “2006 FADAL VMC 4020 CNC MILL with FANUC Ctrl, 4th-Axis Ready, 21 Station, 40×20″ is in sale since Thursday, January 31, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “p20933b” and is located in Chatsworth, California. This item can be shipped to United States.

• Brand: Fadal
• Country/Region of Manufacture: United States
• Model: VMC 4020

JOHNFORD 4-AXIS VERTICAL MACHINING CENTER. 24 SIDE MOUNT ARM TYPE. The item “24 X 18 Y Johnford SV-24 CNC VERTICAL MACHINING CENTER, Fanuc 18MC” is in sale since Thursday, August 23, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “meci1995″ and is located in Biddeford, Maine. This item can be shipped to United States.

• Model: SV-24 CNC
• MPN: SV-24 CNC
• Brand: Johnford

Leblond Makino RMC55 CNC Mill Fanuc OM. Overall Table Size: 31.5 x 12.6. X-Axis Travel: 21.6. Y-Axis Travel: 12.6. Z-Axis Travel: 13.8. Spindle Speeds: 45 – 4,500 RPM. Spindle Feeds: 0 315 IPM. Spindle Nose to Table Top: 4 17.75. Spindle Center to Column: 2.95 15.55. Spindle Taper: ISO 40. Spindle HP: 5/7.5. Rapid Traverse Rate (X, Y, Z-Axes): 470, 470, 315 IPM. Link to YouTube video of machine running. Machine Is Available For Inspection Under Power By Appointment. The item “Leblond Makino RMC55 CNC Mill Fanuc OM With Video” is in sale since Saturday, August 11, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “jkwapich1″ and is located in O’Fallon, Missouri. This item can be shipped to United States.

• Modified Item: No
• Custom Bundle: No
• MPN: RMC55
• Brand: Leblond Makino
• Non-Domestic Product: No

1980 R OKU ROKU Vertimac -0 CNC V ertical Mill. Available to view under power. Z-Axis, Spindle Head Travel. Distance Between Spindle Center and Column Surface. Distance Between Spindle Nose and Table Surface. 8.9″ to 18.9″. Working Area on Table. 63 to 2800 rpm. Number of Spindle Speeds. 1.5 / 0.75 kw. Number of Tool Stations. 200/220 Volt, 50/60 Hz 3-Phase. Specifications subject to verification. Items over 1000 lbs. We will not palletize, skid or crate an item over 1000 lbs. These items are prepared for transit by wrapping the item’s electrical components with stretch wrap and spraying down any exposed metal surfaces with protective oil. This is usually the case with top-heavy items, such as grinding machines. MACHINE WEIGHT: 5,800 lbs. We accept all major credit cards except American Express. Orders are not processed until theyre paid in full. The item “ROKU ROKU Vertimac-0 CNC 20×16 Vertical Milling Machine with FANUC Ctl” is in sale since Wednesday, August 15, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “p20933b” and is located in Chatsworth, California. This item can be shipped to United States.

• Model: Vertimac 0
• Modified Item: No
• Country/Region of Manufacture: Japan
• Custom Bundle: No
• Brand: Roku Roku
• Non-Domestic Product: No

2007/8 fanuc robodrill mate series oi-mc. Comes with orange vice, metrol tool setter, American rotary ADX model phase converter, fluid/filter/portable catch pan and lots of tooling. The item “Fanuc robodrill mate cnc endmill machine” is in sale since Monday, July 9, 2018. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “eas4003″ and is located in Piedmont, Missouri. This item can be shipped to United States.

• Brand: Fanuc
• Model: Robodrill mate
• Country/Region of Manufacture: United States
• Bundle Listing: No

Leblond Makino RMC55 CNC Mill Fanuc OM. Overall Table Size: 31.5 x 12.6. X-Axis Travel: 21.6. Y-Axis Travel: 12.6. Z-Axis Travel: 13.8. Spindle Speeds: 45 – 4,500 RPM. Spindle Feeds: 0 315 IPM. Spindle Nose to Table Top: 4 17.75. Spindle Center to Column: 2.95 15.55. Spindle Taper: ISO 40. Spindle HP: 5/7.5. Rapid Traverse Rate (X, Y, Z-Axes): 470, 470, 315 IPM. Link to YouTube video of machine running. Machine Is Available For Inspection Under Power By Appointment. The item “Leblond Makino RMC55 CNC Mill Fanuc OM With Video” is in sale since Tuesday, July 25, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “jkwapich1″ and is located in O’Fallon, Missouri. This item can be shipped to United States.

• MPN: RMC55
• Brand: Leblond Makino

For sale: Large Makino CNC Milling Machine with Fanuc/Sharnoa controls. It currently does not run as one of the computer hard drives has crashed and should be replaced. Or it might make more sense to upgrade the controls. The machine itself is VERY solid and in good shape. It does have some surface rust, but I think it’d come off. Also includes a laser digitizer attachment. It is wired into 200V 3-phase right now. If you’re local, you are welcome to come take a look. It’s a pretty big machine. The overall size is about 110″ wide at the table, 105″ deep, 122 tall. That’s not including the standalone cabinet or the oil cooler. The item “Makino CNC Vertical Mill with Fanuc Sharnoa Controls” is in sale since Friday, February 16, 2018. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “imbue39″ and is located in Hillsboro, Iowa. This item can’t be shipped, the buyer must pick up the item.