Drive comes with mounting kit for acra. I noted that it could also be used on other machines that have same bolt hole pattern ie: bridgeport, clausing, lagun, sharp. You may have to make shims and bushings to get the spacing clearance correct for your leadscrew. This 140 drive works ok it has a few years of use on it. I retro-fitted the acra mill to a cnc. I cleaned and painted drive.The item “Servo model 140 X Axis Powerfeed Plus Kit for Acra AM-4V also fits Bridgeport +” is in sale since Friday, October 24, 2014. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “cofactors” and is located in Lakeside, Oregon. This item can be shipped to United States.

• Country/Region of Manufacture: United States
• Brand: Servo
• Model: 140
• MPN: 140-435504

Economical pneumatic power draw-bar for bridgeport j-head mills, runs on pressures up to 90 psi, do not exceed that pressure. And it will give you years of faithful service. Uses the stock draw bar. Just screw the 2 extension sleeves to the 5/16 bolts on top of the mill, mount the adapter plate, and bolt the power draw bar to the plate, the 3rd stand is 3/8 shorter than the other two and as you can see from the picture sits on top of the head casting. It can be left that way, or you can drill and tap a 1/4-20 thread into the mill casting and anchor the draw bar at all 3 points. A 3/4 socket is included. Apply air pressure, set the regulator to 90 psi and you are done. J-head and the variable head bridgeport and clone models. I will try to change the picture as soon as i can.

Be sure to add me to your.

The item “MILL QUILL STOP FITS ALL BRIDGEPORTS, MILLING MACHINE, Z9006, USA (C13)” is in sale since Saturday, July 14, 2012. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “lstooling” and is located in Cochran, Georgia. This item can be shipped to United States.

• Model: Z9006
• MPN: Z9006
• Country of Manufacture: United States

Milling machine accessory – right angle attachment r8 fits bridgeport . Milling machine right angle attachment.

7/16-20 bolt with 1/2 hex head.The item “Milling Machine Accessory Right Angle Attachment R8 fits Bridgeport” is in sale since Thursday, September 11, 2014. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “eisenmachineryinc” and is located in Ontario, California. This item can be shipped to North, South, or Latin America and to all countries in Europe and to all countries in continental Asia and to Australia.

• Model: G102-R8
• Country/Region of Manufacture: Taiwan

Milling machine accessory – right angle attachment r8 fits bridgeport . Milling machine right angle attachment. Fits bridgeport-style milling machines with a 3 3/8 (8586mm) quill diameter and r8 spindle taper. Converts a vertical mill into a horizontal mill. Note: maximum allowed speed with right angle attachment is 2000 rpm. Spindle runout is ± 20 micron (0.00078). 7/16-20 bolt with 1/2 hex head.The item “Milling Machine Accessory Right Angle Attachment R8 fits Bridgeport” is in sale since Monday, August 18, 2014. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “eisenmachineryinc” and is located in Ontario, California. This item can only be shipped to Australia.

• Model: G102-R8
• Country/Region of Manufacture: Taiwan

Milling machine accessory – right angle attachment r8 fits bridgeport . Milling machine right angle attachment. Fits all milling machines with a 3 3/8 (8586mm) quill diameter and r8 spindle taper. Converts a vertical mill into a horizontal mill. Note: maximum allowed speed with right angle attachment is 2000 rpm. Complete set includes: right angle attachment, r8 stub arbor & drawbar extension socket.

The item “Milling Machine Accessory Right Angle Attachment R8 fits Bridgeport” is in sale since Thursday, June 26, 2014. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “eisenmachineryinc” and is located in Ontario, California.

This item can only be shipped to Australia.

• Model: G102-R8
• Country/Region of Manufacture: Taiwan

This list is for x axis only if you need y or z. Please contact for new list.

(1)possessing the most tremendous power and the stongest torque force amog the same type of machines. (2)making use of the pwm principle to replenish the consumed power of heavy load and promote the low speea torque force in order to achieve the low speed heavy machining ability. (3)the 0.2 second rapid braking design is available for high speed clockwise and. Counter-clockwise operations, and is able to save the processing tim. This is for 5/8” shaft and 1/8” key.

Option 20mm shaft and 6mm key. No connect plate & scale ring. For 20mm shaft and 6mm key, assembly parts connect plate & scale ring…. Input : 220, 240, 380, 415, 440v.

This transformer is for st-type use only.The item “Milling Machine Part- Super Tiger X Axis Power feed fits Bridgeport” is in sale since Saturday, March 15, 2014. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “saneagle-taiwan” and is located in Feng-yuan, default. This item can be shipped worldwide.

Economical pneumatic power draw-bar for bridgeport j-head mills, runs on pressures up to 90 psi, do not exceed that pressure. And it will give you years of faithful service. Uses the stock draw bar. Just screw the 2 extension sleeves to the 5/16 bolts on top of the mill, mount the adapter plate, and bolt the power draw bar to the plate, the 3rd stand is 3/8 shorter than the other two and as you can see from the picture sits on top of the head casting.

It can be left that way, or you can drill and tap a 1/4-20 thread into the mill casting and anchor the draw bar at all 3 points. A 3/4 socket is included. Apply air pressure, set the regulator to 90 psi and you are done. J-head and the variable head bridgeport and clone models. I will try to change the picture as soon as i can.The item “Power Draw bar fits Bridgeport J-head milling machines” is in sale since Monday, March 24, 2014. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “karlcustommachineworks” and is located in Redding, California. This item can be shipped worldwide.

Complete set includes: right angle attachment, r8 stub arbor & drawbar extension socket.The item “Milling Machine Accessory Right Angle Attachment R8 fits Bridgeport” is in sale since Tuesday, April 08, 2014. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “eisenmachineryinc” and is located in Ontario, California. This item can only be shipped to Australia.

• Country of Manufacture: Taiwan, Province of China

Unit overall dimension: 5”l x 8/38”w x 11-1/4”h. Reversible with 1.5 second time delay. 115v/60hz / 1 phase power supply.

Additional charge applies to apo, ak, hi, gu, pr, and vi addresses. It is safe, fast & reliable.

Please allow 24 to 48 hours to receive a response. Will do our best to answer all your questions as soon as we can.The item “Table Milling Machine Power Feed X-Axis Torque 150 LBS Mill Fits Bridgeport Acer” is in sale since Saturday, March 01, 2014. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Workholding\Vises”. The seller is “dbmimports” and is located in Los Angeles, CA. This item can only be shipped to United States.