THIS LISTING COMES WITH A STAND. IF YOU WOULD LIKE A MACHINE WITHOUT THE STAND, PLEASE SEE OUR OTHER LISTING. 6 Speed Geared Head, with all Hardened and Ground Steel Gears for. This machine uses 120V Standard Power! Highlights Of This Machine. All Hardened and Ground Steel Gears in head, for much heavier. Cutting capability, particularly when compared with plastic gear equipped models. Compact Size for smaller work shops, but has more weight and power to. Remove material when needed. 001 on X and Y with a true Inch Pitch. Leadscrew, leads to easier operation when tolerances matter. Main Column is attached to the base with 4 bolts from the top, with. A very wide mounting surface for much more rigidity over other. Models in this size range. Only Requires Standard 120V Single Phase Circuit, so it can be. Set up virtually anywhere, without needing additional circuits. Installed in your work shop. Compact, Accurate, Economical Machine. Great for those who are looking for a compact machine for a smaller work shop, yet need the ability to take heavier cuts compared with other machines in this size range Spindle is Supported by High Precision Tapered Roller Bearings Mill Head May be Tilted ±90° (both left and right) Precision Manual Fine Down Feed is standard Adjustable Tapered Gibs for longer life Positive Locks are standard for Table, Head, Quill, and Column Easy Reading Dials Have Satin Chrome Finish, Graduated in. 001 Quill DRO is Standard, Accuracy of the Display 0.0005, Selectable from mm/inch Generous 18-1/4 Spindle To Table Max Distance for taller work 8-1/2 Y Axis Travel, More than other machines in this class. Average time delivered is 2-7 days depending on how far from Pittsburgh you are, it could be a little longer in remote places but normally is very fast. Quality Machine Tools, 701 Parkway View Drive, Pittsburgh, PA 15205. We are machinists here too, so we know what we sell. This is really a top quality machine, and will last a long, long time. AND we are here for support too. We sell these machines regularly, we know them inside and out, and have been in business for many years, so if there is any question, we can help. End Milling Capacity: 1. Face Milling Capacity: 3. Table Size: 27-1/2 x 7-1/8. Cross Travel (Y Axis): 8-1/2. Longitudinal Travel (X Axis): 15. Table Leadscrew Pitch 10 TPI. Vertical Travel (Z Axis): 16. Max Distance Spindle to Table: 18-1/4. Taper of Spindle: R-8, w/7/16-20 Drawbar Thread. Spindle (Quill) Travel: 3. T Slot Size: 1/2T Slots are slightly less than 1/2, actual size 12mm, our 1/2 kit. Is sized for this machine. Range of Spindle Speeds: 115 – 1,700 RPM, 6 STEPS. Head Tilt: Left & Right ±90°. Net Weight (WITHOUT STAND): 475 LBS. Net Weight (WITH STAND): 575 LBS. Power Required: 110/120V, Minimum 15 Amp Circuit. Dimensions: 39W x 70H x 30D. Height with head at top of Z travel: 76 (On Stand). Height with head at normal working height: 71 (On Stand). NO extra charge for residential or anything on these, as long as a truck can get to you, its covered. Check out our other auctions for more lathes and mills. The item “PM-727-M VERTICAL BENCH TOP MILLING MACHINE WithSTAND, GEARED HEAD FREE SHIPPING” is in sale since Tuesday, September 4, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “qualitymachinetools” and is located in Pittsburgh, Pennsylvania. This item can be shipped to United States, Canada.

• MPN: PM-727M with PM-727 STAND
• Brand: Precision Matthews
• Country//Region of Manufacture: China

Kitamura MyCenter 7X Vertical Machining Center. Kitamura MyCenter 7X Vertical Machining Center, 25.5″ x 67″ Table with Yasnac i80 Control, 30 Tool Changer, New Spindle Bearings, Cat #40. See a brief video of the Mill running at the below link. 25.7″ x 67″. Spindle Nose to Table Top. 7.8″ x 34.9″. 10,000 RPM geard head. Side mount w/ Swing arm. 165″ x 101″ x 129H. Equipped With: Rigid Tapping, Yasnac i80 32 bit CNC Control, Fully Enclosed Guards, Manuals, RS-232 Port. We endeavor to make information as complete and accurate as possible. If you notice a discrepancy, please let one of our sales people know so that the error can be corrected. NEED HELP OR HAVE ADDITIONAL QUESTIONS! Don’t see what you want on E-bay? Give us a call. Less than half our Inventory is on E-bay. We have new machines coming in every week! Check out more machines online at Myers Technology Co! Machine is located next to O’Hare. Can be seen under power or inspected w/ appointment. The item “Kitamura Mycenter 7X Machining Center 25 x 67 VMC with 30 ATC, 10K Geared Spindle” is in sale since Thursday, July 13, 2017. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “myerstechcncs” and is located in Elk Grove Village, Illinois. This item can’t be shipped, the buyer must pick up the item.

• X-Axis Travel: 60″
• Y-Axis Travel: 25.6″
• Z-Axis Travel: 27″
• Model: MyCenter 7X
• Brand: Kitamura
• Spindle Type: Geared Head
• Spindle Speed: 10,000 RPM
• Spindle Taper: CAT 40

THERE IS NO STAND WITH THIS LISTING, IF YOU WOULD LIKE A STAND PLEASE SEE OUR OTHER LISTING. 6 Speed Geared Head, with all Hardened and Ground Steel Gears for. This machine uses 120V Standard Power! Highlights Of This Machine. All Hardened and Ground Steel Gears in head, for much heavier. Cutting capability, particularly when compared with plastic gear equipped models. Compact Size for smaller work shops, but has more weight and power to. Remove material when needed. 001 on X and Y with a true Inch Pitch. Leadscrew, leads to easier operation when tolerances matter. Main Column is attached to the base with 4 bolts from the top, with. A very wide mounting surface for much more rigidity over other. Models in this size range. Only Requires Standard 120V Single Phase Circuit, so it can be. Set up virtually anywhere, without needing additional circuits. Installed in your work shop. Compact, Accurate, Economical Machine. Great for those who are looking for a compact machine for a smaller work shop, yet need the ability to take heavier cuts compared with other machines in this size range Spindle is Supported by High Precision Tapered Roller Bearings Mill Head May be Tilted ±90° (both left and right) Precision Manual Fine Down Feed is standard Adjustable Tapered Gibs for longer life Positive Locks are standard for Table, Head, Quill, and Column Easy Reading Dials Have Satin Chrome Finish, Graduated in. 001 Quill DRO is Standard, Accuracy of the Display 0.0005, Selectable from mm/inch Generous 18-1/4 Spindle To Table Max Distance for taller work 8-1/2 Y Axis Travel, More than other machines in this class. Average time delivered is 2-7 days depending on how far from Pittsburgh you are, it could be a little longer in remote places but normally is very fast. Quality Machine Tools, 701 Parkway View Drive, Pittsburgh, PA 15205. We are machinists here too, so we know what we sell. This is really a top quality machine, and will last a long, long time. AND we are here for support too. We sell these machines regularly, we know them inside and out, and have been in business for many years, so if there is any question, we can help. End Milling Capacity: 1. Face Milling Capacity: 3. Table Size: 27-1/2 x 7-1/8. Cross Travel (Y Axis): 8-1/2. Longitudinal Travel (X Axis): 15. Table Leadscrew Pitch 10 TPI. Vertical Travel (Z Axis): 16. Max Distance Spindle to Table: 18-1/4. Taper of Spindle: R-8, w/7/16-20 Drawbar Thread. Spindle (Quill) Travel: 3. T Slot Size: 1/2T Slots are slightly less than 1/2, actual size 12mm, our 1/2 kit. Is sized for this machine. Range of Spindle Speeds: 115 – 1,700 RPM, 6 STEPS. Head Tilt: Left & Right ±90°. Net Weight : 475 LBS. Power Required: 110/120V, Minimum 15 Amp Circuit. Dimensions: 39W x 42-3/8H x 30D. Height with head at top of Z travel: 48-3/8. NO extra charge for residential or anything on these, as long as a truck can get to you, its covered. Check out our other auctions for more lathes and mills. The item “PM-727-M VERTICAL BENCH TOP MILLING MACHINE, GEARED HEAD NO STAND FREE SHIPPING” is in sale since Tuesday, August 14, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “qualitymachinetools” and is located in Pittsburgh, Pennsylvania. This item can be shipped to United States, Canada.

• Modified Item: No
• Custom Bundle: No
• MPN: PM-727M
• Brand: Precision Matthews
• Non-Domestic Product: No
• Country//Region of Manufacture: China

PARTS/REPAIR: Motor is defective. Heavy signs of use, can still be repaired or use for parts. This sale is for everything seen in these photos! Mill drill machine, stand, 3 power feeds, hardware, etc. Spindle Speed Control. Swing Distance (Inch). Table Length (Inch). Table Width (Inch). Longitudinal Travel (Inch). Cross Travel (Inch). Number of Spindle Speeds. Minimum Spindle Speed (RPM). Maximum Spindle Speed (RPM). Spindle Travel Length (Inch). Spindle Taper Size. Drilling Capacity in Steel (Inch). Drilling Capacity in Cast Iron (Inch). Maximum Spindle to Table Distance (Inch). Left-Hand Head Tilt (Degrees). Right-Hand Head Tilt (Degrees). Overall Length (Decimal Inch). Overall Height (Inch). Overall Depth (Inch). All Local pickups are SUBJECT to cancellation AT OUR SOLE DISCRETION. Your transportation must EXCEED the capacity of the load, and MUST BE ABLE to have the item loaded with a Pallet. We will not unwrap an item to make it fit into your transport. We pass all of our discounts on to you. Florida is known for sudden downpours- so lets try to get everything loaded at dock height, shall we? The item “Enco 20 Square Collumn Geared Head Mill Drill with Stand and 3 Power Feeds REPAIR” is in sale since Thursday, May 10, 2018. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “industryrecycles” and is located in Venice, Florida. This item can be shipped to United States.

• Brand: Enco
• MPN: Does Not Apply
• Location: whs7xxx

Geared Head Mill / Drill Machine. Swing Distance – 20. Table Length – 28-3/4. Table Width – 8-1/4. Longitudinal Travel – 18-1/8. Cross Travel – 9. Number of Spindle Speeds – 6. Speed – 50 RPM. Speed – 1550 RPM. Spindle Taper – R8 / 3MT. Drill Capacity in Steel / Cast Iron – 1-1/2. Tapping Capacity in Steel – 3/4. This machine is unused overstock, tested and functions properly without issue. All of the mechanical parts work smoothly. There are a few minor paint scuffs on the machine, and the motor’s fan shroud in not included. Please view our video & pictures for further detail. Comes exactly as shown. Copy & paste link below to see video of the machine running. All Local pickups are SUBJECT to cancellation AT OUR SOLE DISCRETION. Your transportation must EXCEED the capacity of the load, and MUST BE ABLE to have the item loaded with a Pallet. We will not unwrap an item to make it fit into your transport. We pass all of our discounts on to you. Florida is known for sudden downpours- so lets try to get everything loaded at dock height, shall we? The item “Geared Head Mill / Drill Machine 20 Swing R8 Spindle 1550 RPM 1 HP 230v 1 Phase” is in sale since Thursday, May 25, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “industryrecycles” and is located in Venice, Florida. This item can be shipped to United States.

• Brand: Unbranded/Generic
• MPN: Does Not Apply
• MSRP: $3550

Geared Head Mill / Drill Machine. W/ 3-Axis Newall DRO System. Swing Distance – 20. Table Length – 32. Table Width – 9-3/8. Longitudinal Travel – 20-1/2. Cross Travel – 8-1/4. Number of Spindle Speeds – 6. Speed Range – 65 to 1550 RPM. Spindle Travel – 5. Spindle Taper Size – 3MT / R8. This is an unused trade-show demo machine, in great overall condition. All of the electrical & mechanical functions work without issue. The digital readout and power feed have been tested and function properly as well. Please view our video & pictures for further detail. Comes exactly as shown. All Local pickups are SUBJECT to cancellation AT OUR SOLE DISCRETION. Your transportation must EXCEED the capacity of the load, and MUST BE ABLE to have the item loaded with a Pallet. We will not unwrap an item to make it fit into your transport. We pass all of our discounts on to you. Florida is known for sudden downpours- so lets try to get everything loaded at dock height, shall we? The item “Rong Fu Geared Head Mill / Drill Machine with DRO 20 Swing 220v 1 Ph. RF-45N2F” is in sale since Monday, May 08, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “industryrecycles” and is located in Venice, Florida. This item can be shipped to United States.

• Brand: Rong Fu
• Model: RF-45N2F
• MPN: Does Not Apply
• MSRP: $5000

We Have Done Our Best To Describe It In Detail ;However, This Is A Used Item And In Our Opinion A Good One ;However, Opinions Can & Will Differ On. Even Though The Machine Looks Good It Is Used So We Prefer And/Or Strongly Recommend You Visit & Inspect It Yourself In Person ;However, Should This Not Be Possible Or. Please Review The Photos & Ask As Many Questions As Possible So You Know What To Expect When It Arrives!! This Has Been , Inspected And Tested For It’s Function Only… We Can Not & Do Not Determine If It Meets Any And/Or All Safety Issues And/Or Concerns With Regards To The Machine, It’s Installation , Operation & Safe Guarding. Any And/Or All Issues Or Concerns. With Regards Safety Are The Buyers Sole Responsibility. And By Purchasing This Machine You Are Agreeing And Accepting The Terms Above. Machine Details & Specifications. (1) Pre-Owned /Used Import Gearhead Vertical Milling Machine W/R8 Spindle… Similar But Not Clausing /Rockwell Type W/9.5″ x 27.5″ Table. Motor: 110V/60Hz / 1 – Phase 1.5 HP. Spindle Collar: 1.740. Spindle to Table: 17-3/4. Face Mill Cap: 3. End Mill Cap: 3/4. Tapping Cap: 1/4 Max. Y-Travel: 6-13/16 X-Travel: 19-13/16. Table Dimensions: 27-1/2L x 9-1/2W. Runs Great , Everything In Very Good Working Order As Well As A Very Nice Overall Condition!!! Safety Requirements & Standards. We’ll Provide Heavy Duty & Secure Packing/Skidding……. Or if you wish. Pick It Up Yourself, No Charge For Loading On Your Truck. Brenda & Cliff Davis. Cdavis (at) Davis Machinery (dot)com. The item “Milling Machine, Import Geared Vertical Mill, Not Rockwell/Clausing Built 2013+/” is in sale since Monday, January 30, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “davismachinery” and is located in Providence, Rhode Island. This item can be shipped to United States.

• Brand: Unbranded/Generic
• Country/Region of Manufacture: Unknown
• MPN: Vertical Milling Machine
• Model: Vertical

Here’s a beautiful rong fu 20 geared head mill/drill with power downfeed, power table feed, optional factory stand, and 21 r8 arbors/collets of all sizes that have never been used, ever. The machine is listed and described in the supplier’s online catalog, page 550. This motor is 1 1/2 hp, 220 volts, single phase power. Again, this machine has had zero use. Thanks, and good luck! Geared head milling/drilling machine. Head tilts left/right for increased versatility. Full power to the cutting tool through 6 speed geared head. Square column with dovetail ways on rf-45. Tilting head 90° left and 30° right. Power downfeed for rf-45n2f model. 1 (3-phase) / 1.5 (1-phase). 50hz 551260 (6 speeds). 50hz 552520 (12 speeds). (l x w x h). 915 × 737 × 1194. 330 / 360 kgs. 725 / 795 lbs.The item “BEAUTIFUL Rong Fu RF-45 20 Geared Head Mill Drill, Power Downfeed, Table Feed” is in sale since Saturday, April 18, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “iceshorttracker” and is located in Carmel, Indiana. This item can’t be shipped, the buyer must pick up the item.

• Brand: Rong Fu
• Model: RF-45