THERE IS NO STAND WITH THIS LISTING, IF YOU WOULD LIKE A STAND PLEASE SEE OUR OTHER LISTING. 6 Speed Geared Head, with all Hardened and Ground Steel Gears for. This machine uses 120V Standard Power! Highlights Of This Machine. All Hardened and Ground Steel Gears in head, for much heavier. Cutting capability, particularly when compared with plastic gear equipped models. Compact Size for smaller work shops, but has more weight and power to. Remove material when needed. 001 on X and Y with a true Inch Pitch. Leadscrew, leads to easier operation when tolerances matter. Main Column is attached to the base with 4 bolts from the top, with. A very wide mounting surface for much more rigidity over other. Models in this size range. Only Requires Standard 120V Single Phase Circuit, so it can be. Set up virtually anywhere, without needing additional circuits. Installed in your work shop. Compact, Accurate, Economical Machine. Great for those who are looking for a compact machine for a smaller work shop, yet need the ability to take heavier cuts compared with other machines in this size range Spindle is Supported by High Precision Tapered Roller Bearings Mill Head May be Tilted ±90° (both left and right) Precision Manual Fine Down Feed is standard Adjustable Tapered Gibs for longer life Positive Locks are standard for Table, Head, Quill, and Column Easy Reading Dials Have Satin Chrome Finish, Graduated in. 001 Quill DRO is Standard, Accuracy of the Display 0.0005, Selectable from mm/inch Generous 18-1/4 Spindle To Table Max Distance for taller work 8-1/2 Y Axis Travel, More than other machines in this class. Average time delivered is 2-7 days depending on how far from Pittsburgh you are, it could be a little longer in remote places but normally is very fast. Quality Machine Tools, 701 Parkway View Drive, Pittsburgh, PA 15205. We are machinists here too, so we know what we sell. This is really a top quality machine, and will last a long, long time. AND we are here for support too. We sell these machines regularly, we know them inside and out, and have been in business for many years, so if there is any question, we can help. End Milling Capacity: 1. Face Milling Capacity: 3. Table Size: 27-1/2 x 7-1/8. Cross Travel (Y Axis): 8-1/2. Longitudinal Travel (X Axis): 15. Table Leadscrew Pitch 10 TPI. Vertical Travel (Z Axis): 16. Max Distance Spindle to Table: 18-1/4. Taper of Spindle: R-8, w/7/16-20 Drawbar Thread. Spindle (Quill) Travel: 3. T Slot Size: 1/2T Slots are slightly less than 1/2, actual size 12mm, our 1/2 kit. Is sized for this machine. Range of Spindle Speeds: 115 – 1,700 RPM, 6 STEPS. Head Tilt: Left & Right ±90°. Net Weight : 475 LBS. Power Required: 110/120V, Minimum 15 Amp Circuit. Dimensions: 39W x 42-3/8H x 30D. Height with head at top of Z travel: 48-3/8. NO extra charge for residential or anything on these, as long as a truck can get to you, its covered. Check out our other auctions for more lathes and mills. The item “PM-727-M VERTICAL BENCH TOP MILLING MACHINE, GEARED HEAD NO STAND FREE SHIPPING” is in sale since Tuesday, August 14, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “qualitymachinetools” and is located in Pittsburgh, Pennsylvania. This item can be shipped to United States, Canada.

• Modified Item: No
• Custom Bundle: No
• MPN: PM-727M
• Brand: Precision Matthews
• Non-Domestic Product: No
• Country//Region of Manufacture: China

Pro Tram System (Model: 01-000). Square the head of a milling machine quickly and easily. To use the Pro Tram simply lower unit to the table and adjust the head until both indicators read the same. Guaranteed to be equal to or better than any other tramming method or spindle squaring device available. Sized perfectly to fit the bed of a 6 vise allowing the head to be trammed to the vise instead of the table. Can be used with a sine bar or sine plate to adjust the head to precise angles. Calibration procedure accounts for any error introduced by worn collets. Indicator graduations available in 0.001″ and 0.0005″. Shank sizes available in 1/2″ and 3/8″. Large 2.2 easy to read indicator face. Indicator repeatability of 0.0002. Body made from red anodized aluminum. Includes calibration gage, manual and padded case. Also available is our Mini Pro Tram System designed specifically for smaller Table Top and Mini mills. The Pro Tram by Edge Technology makes the process of tramming your mill fast, easy and accurate. Tramming is the process of squaring the head of your milling machine to the table. The Pro Tram is sized to fit the bed of a 6 vise allowing you to tram directly to vise for increased accuracy. It can be used with a sine bar or sine plate to adjust the head to precise angles. Protected by one or more US patents. Please request a package invoice before you pay. We guarantee that the Pro Tram System will allow you to tram your machine with the same or better accuracy as compared to conventional tramming techniques. We also guarantee that you will be able to complete the tramming procedure with less time and effort. Related Products by Edge Technology Products. Please take a moment to check out the other high quality machinist gages and tools that we offer. The item “Pro Tram Bridgeport Head Square Knee Mill Spindle CNC Router milling endmill #01″ is in sale since Friday, August 24, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “edge_products” and is located in Tucson, Arizona. This item can be shipped to United States.

• Brand: Edge Technology
• MPN: 01-000
• Model: Pro Tram System 1/2″ Shank – 0.001 Graduation
• Used With: Bridgeport Mills CNC Router Knee Mill Endmill
• Used For: Tramming or Square Spindle milling machine head

Vintage Bridgeport Milling Machine Head with Vertical Cochrane Bly Stand It has a 1/2 HP Master Motor I’ve plugged it in and it seems to work well. Please let me know if you have any questions about this listing. The item “Vintage Bridgeport Milling Machine Head with Vertical Cochrane Bly Stand” is in sale since Wednesday, August 15, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “rxr_collection” and is located in Ojai, California. This item can’t be shipped, the buyer must pick up the item.

• Modified Item: No
• MPN: Does Not Apply
• Custom Bundle: No
• Brand: Bridgeport
• Non-Domestic Product: No

Excellent Atlas Index Centers for Atlas 7 Metal Shaper. This indexing pin is missing and the spindle is very stiff from many decades of storage, the crank does not turn easily.. The unit needs a good cleaning and lubrication. These are considered the rarest of Atlas shaper accessories From Original Brochure for the Atlas 7 Shaper: For dividing operations requires in splining, fluting, gear cutting and squaring shafts. Heavy base casting is held to T-slots in shaper by cap screws – support for inner center is cast with base. Outer Center support may be positioned for work up to 8 inches long. Screw with ball crank operates adjustable center. Spindle is locked in position by coordinate clamp. SPECIFICATIONS: 8″ maximum distance between centers, maximum swing 5-1/2″, base 14-1/4″ x 6″ x 7/8 thick. This sale is for Excellent Atlas Index Centers for Atlas 7 Metal Shaper. This indexing pin is missing and the spindle is very stiff from many decades of storage, the crank does not turn easily. These are considered the rarest of Atlas shaper accessories. Please see further pictures below the description. From Original Brochure for the Atlas 7 Shaper: For dividing operations requires in splining, fluting, gear cutting and squaring shafts. A scale shown is for size reference only and not part of the sale. Thank you for looking Please check my other auctions of precision watchmakers, machinists tools and other unique items. All items are described to the best of my ability and questions are encouraged. I have No way to know when and if these charges will be applied. It is understood that by purchasing any item the purchaser assumes all liability and holds harmless and indemnifies JSR & Father Industrial Machinery & Supplies Inc. And its directors against any damage or penalties associated with: 1. Compliance to current or future laws, rules or regulations pertaining to the use or possession of any equipment device or components, 2. Any property damage caused directly or indirectly by the use, operation or possession of any equipment, device or component. Machine Safety: it is the user’s responsibility to provide proper safety devices and equipment to safeguard the operator from harm for any particular use, operation or setup, and to adequately safeguard the machine, or machines, to conform to all Federal, State and Local Government Safety Standards and All Industry Safety Standards. Get images that make Supersized seem small. Track Page Views With. Auctiva’s FREE Counter. The item “RARE Atlas Index Centers Dividing Head for Atlas 7 Metal Shaper” is in sale since Monday, August 20, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “jrwoodca” and is located in Perth, Ontario. This item can be shipped to United States, Canada.

Used 10 CARROLL Dividing Head with Tailstock. Y an d subject to prior sale. The item “10 CARROLL Dividing Head with Tailstock” is in sale since Tuesday, April 17, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “amcsales” and is located in Dayton, Ohio. This item can be shipped to United States.

• Brand: Carroll
• MPN: Does Not Apply
• Country/Region of Manufacture: United States

Lagun South Bend Chipmaster II Vertical Milling Machine With 5HP Baldor EVS Head. This machine today cost about 20K, w/DRO & servo power feed. This Lagun mill is far better than the current. This is a Very nice machine that was only used one month before it was put in storage. Machine does not picture well because it has some coolant stains on it and still has. No rust at all. You will not be disappointed in the condition or performance of this mill. Questions call Nathan 817 994 4874. Specifications – Table size: 10 x 50 – T-slots, (3) on 2 1/2 centers – T-slot size 5/8 – Maximum weight on table: 800 lbs Travels – Table travel x-axis, manual/ with power feed: 33 / 30 – Cross travel, y axis: 16 – Knee travel, z axis: 16 – Ram travel: 22 3/16 Head – Main motor: 5 hp Electronic Variable Speed EVS – Infinite variable speed: to 5,000 rpm – Head swivel +/- 90 degrees – Head tilt +/- 45 degrees – Distance, spindle to column 5 to 27 – Distance, spindle to table 0 to 18 1/2 Quill – Power quill feeds to quill/rev. 006 inch/rev – Spindle taper: r-8 – Quill diameter: 3 3/8 – Quill travel: 5 Machine Dimensions – Column turret diameter (graduated): 15 – Knee width: 11 ½ – Knee to column bearing length: 13 7/818 – Saddle & table bearing length: 20 – Ram & turret bearing length: 19 – Ram total: 36 – Motor: 5hp; 460/3/60 – Height: 104 – Width: 67 – Depth: 63 – Weight: 3,200 lbs Outstanding Features – Variable speed head – Dynamically balanced head – Fully interchangeable meehanite castings throughout – Hard chrome quill – Extra wide saddle – Hardened & precision ground square ways – Precision ground lead screws – Class 7 spindle bearings – Hardened & ground back gear – Dual knee & table locks Equipment Included – X-axis servo feed – Y-axis servo feed – Mituyoto Digimatic 2 -axis digital readout – Electronic variable speed milling head – Flood coolant system – One shot lubrication #4975 (RJ) 1/18/2012. During the weekends and holidays we will be available if online. We answer all emails within 24 hours or less except holidays which are answered as we have time. If you feel you have received 5 star services then indicate that in your feedback. We do the best we can to get it right but with the vast diversion of items we offer things can be overlooked. And check out our. You are welcome to. To keep track of new arrivals. We will also need to know if you are a business with a dock and/or forklift for unloading. If you are not a business and/or are residential there will be additional charges. This is a summary of Section 48 of the UPS Rate and Service Guide dated 2012 and is an industry standard policy adopted by The Tool General. The complete document is available here. Track Page Views With. Auctiva’s FREE Counter. The item “Lagun Chipmaster II Vertical Mill 5HP Baldor Variable Head EVS” is in sale since Wednesday, January 18, 2012. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “toolgeneral” and is located in Fort Worth, Texas. This item can be shipped to United States.

• Model: Chipmaster II
• Brand: Lagun South Bend

SuperMax Mill head Bridgeport J Head. Super max mill head fits Bridgeport series 1. This is a used item that has been tested and found to be in working condition. Item comes as pictured. We do the best we can to get it right, but with the vast diversity of items we offer, things can be overlooked. If you feel you have received 5 star service, please indicate that in your feedback. We cant fix it if we dont know about the problem. We strive to answer all messages within 24 hours. During the holidays there may be a longer response time. Please feel free to message us with any questions, comments or concerns. UPS has a 150 lb weight limit with dimensional restrictions. International weight and size restrictions vary. We will also need to know if your address is a residence or a business with a dock and/or forklift to unload, and whether you will need assistance off-loading (lift-gate service). Track Page Views With. Auctiva’s FREE Counter. The item “SuperMax Mill head Bridgeport J Head” is in sale since Tuesday, May 15, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “toolgeneral” and is located in Fort Worth, Texas. This item can be shipped worldwide.

• Model: j head
• MPN: Does Not Apply
• Brand: Bridgeport

Please call with any questions. We will assist you in any reasonable way to help get your items to your destination, All checks subject to bank verification. Please Call: Two Zero T hree, Five Nine Two, Eight Four Zero Two, with any questions or concerns, Thank You! You are welcome to inspect any machine by appointment. Guerrera Machine Company, LLC. Will not be held liable for any inaccurate information. The item “BRIDGEPORT J HEAD SERIES TRUE-TRACE Milling Machine” is in sale since Thursday, June 28, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “guerreramachinecompanyllc” and is located in Watertown, Connecticut. This item can be shipped to United States.

• Brand: Bridgeport

This is a 10 dividing head made by LW Chuck Co, Toledo, OH. Comes with adjustable tailstock, drive center and all 3 indexing plates. Head tilts from below horizontal to beyond 90 degrees. Centerline height is 5-3/8. Spindle is 10 B&S inside and 2-1/4 X 10TPI outside. Cleaned, lubricated and painted. The item “Large American Made Dividing Head, Indexing Head” is in sale since Friday, July 27, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “uxbtoolman” and is located in Uxbridge, Massachusetts. This item can be shipped to United States, Canada.

• Model: 10″
• Country/Region of Manufacture: United States
• MPN: 10″
• Brand: LW

HEAVY-DUTY BENCHTOP MILL/DRILL WITH VARIABLE-SPEED HEAD – SAMPLE MACHINE. Only Grizzly could pack so many big features into a benchtop machine! This great mill/drill sports some of the same features found on much larger machines. The G0795 comes with a dovetail column, a variable-speed, 1 HP, 220V motor, an R-8 spindle, and a large 7-1/2″ x 27-1/2″ work table. The mill/drill base is made from heavy cast iron to ensure cuts are smooth and vibration free. This is an excellent value and great for seasoned machinists or those just starting out. This G0795Z is the same as our G0795, but features a 2HP BLDC Variable Speed Motor for even more power! Reversible spindle and tapping controls. Coarse/fine spindle downfeed with stops. Precision-ground dovetail ways and column. Motor: 2 HP, 220V, single-phase, 6.8A. Table size: 7-1/2″ x 27-1/2″. Table travel (X-Axis): 14-3/16. Table travel (Y-Axis): 9-1/4. Head travel (Z-Axis): 13-3/4. Spindle speeds: 6, 115 – 1700 RPM. Head tilt: 45 degrees left & right. Table T-slots: 7/16″ W, 2-1/2″ OC. Overall size: 39″ W x 49-1/2″ H x 30-1/2 D. Base footprint: 14″ W x 22″ D. Item location: Bellingham, WA. We are committed to your satisfaction. We welcome offers on our eligible listings. While we will respond as quickly as possible, offers made between Friday and Saturday will expire before we are able to reply. What Are My Options? Since our inception in 1983, Grizzly Industrial®, Inc. Has grown into one of the largest machinery companies in the United States. Our products can be found in all sizes of shops from the large industrial production users to the smaller cabinet and machine shops. We have the widest product selection under one brand in the world and we sell direct to the user, cutting out the dealer network, and resulting in lower prices to you. We ARE Grizzly Industrial, Inc. We reserve the right to correct errors and omissions in our listings, including specifications, photographs, and pricing. Thank you for your interest. The item “SF01077 Heavy-Duty Benchtop Mill/Drill with Variable-Speed Head Sample Machine” is in sale since Thursday, July 5, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “grizauctions” and is located in Bellingham, Washington. This item can be shipped to United States.

• Buyer Requirements: 2 Prior eBay Purchases
• Model: G0795Z
• Country/Region of Manufacture: China
• MPN: SF01077
• Brand: Grizzly
• Item Location: Bellingham, WA