You are considering a Bridgeport, J-Head Milling Machine. This machine is used, but seems to be in good overall condition. We have “test run” the machine here to the best of our ability under “no-load” conditions. We are not machinist, but the mill seems to run out fine. This machine had set unused for an unknown amount of time. We acquired it from a large manufacturing facility that had shut down a few years ago. Judging by the amount of dust, grim and mild surface rust on it when we got it, it hadn’t been used in years. Everything was “stiff” when we first started testing and cleaning it, but it loosened up quickly. It may still need some adjustment and cleaning to get it in tip top shape. We did not receive any tooling with this machine. It does have a drawbar and one R8 collet with it. It is missing the small handwheel that mounts of the front of the head for fine adjusting the quill up and down. This seems to be a commonly misplaced or unused handwheel. Nearly every mill we bring in is missing it. Voltage: 230/460V 3 Phase (currently wired for 230V). Variable Speed: Yes, Step Pulley Type. Table Size: 9″ X 42″. Power-feed on table: Yes. On X-Axis (left right). Power Down-feed on the Quill: Yes. Includes: Knee Handle, Drawbar and Qty 1 R8 Collet (No other tooling included). You are more than welcome to come inspect / run the mill here at out warehouse. Or, you are more than welcome to pick the item up here. Or if you will need lift-gate truck service. Be sure to check out our other listings for more new and used surplus items. The item “Bridgeport 9 X 42 J-Head Milling Machine 1-1/2 HP with Powerfeed” is in sale since Friday, June 8, 2018. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “surplusindustrial” and is located in Muscle Shoals, Alabama. This item can be shipped to United States.

• Country/Region of Manufacture: United States
• MPN: Does Not Apply
• Brand: Bridgeport

This guarantee applies only to machines, which we own. Shall not be responsible for any damages done by truckers, riggers, or other parties. The item “Bridgeport Series I J-Head, Vertical Milling Machine” is in sale since Friday, March 23, 2018. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “energ_machinery” and is located in East Hampton, Connecticut. This item can be shipped to United States.

• Brand: Bridgeport
• MPN: Series I, J-Head
• Model: Series I, J-Head

Economical pneumatic power draw-bar for Bridgeport J-Head mills, Runs on pressures up to 90 psi, do not exceed that pressure and it will give you years of faithful service. Uses the stock drawbar. Just screw the 2 extension sleeves to the 5/16 bolts on top of the mill, mount the adapter plate, and bolt the power draw bar to the plate, the 3rd stand is 3/8 shorter than the other two and as you can see from the picture sits on top of the head casting. It can be left that way, or you can drill and tap a 1/4-20 thread into the mill casting and anchor the draw bar at all 3 points. A 3/4 socket is included. Apply air pressure, set the regulator to 90 psi and you are done. There are 12 mounting holes, drilled on a 4.35 inch bolt hole circle. If you have a Bridgeport clone or other milling machine, measure your mounting holes to determine if this product will fit your mill. If your holes do not line up, this product can still work if YOU are willing to locate, drill and tap 2 mounting holes. Measure and be sure, thanks…… I just can not afford to pay people to “see” if this item will work for them. The item “Power Draw bar fits Bridgeport J-head milling machines and many imports” is in sale since Thursday, October 27, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “karlcustommachineworks” and is located in Redding, California. This item can be shipped to United States.

• Brand: n/a
• MPN: n/a

Economical pneumatic power draw-bar for Bridgeport J-Head mills, Runs on pressures up to 90 psi, do not exceed that pressure and it will give you years of faithful service. Uses the stock drawbar. Just screw the 3 extension sleeves to the 5/16 bolts on top of the mill and bolt the power draw bar to the extensions, the 3rd stand is 3/8 shorter than the other two and as you can see from the picture sits on top of the head casting. It can be left that way, or you can drill and tap a 1/4-20 thread into the mill casting and anchor the draw bar at all 3 points. A 3/4 socket is included. Apply air pressure, set the regulator to 90 psi and you are done. There are 12 mounting holes, drilled on a 4.35 inch bolt hole circle. If you have a Bridgeport clone or other milling machine, measure your mounting holes to determine if this product will fit your mill. If your holes do not line up, this product can still work if YOU are willing to locate, drill and tap 2 mounting holes. Measure and be sure, thanks…… I just can not afford to pay people to “see” if this item will work for them. The item “Power Draw bar fits Bridgeport J-head milling machines and some imports” is in sale since Tuesday, February 16, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “karlcustommachineworks” and is located in Redding, California. This item can be shipped to United States.

• Brand: n/a
• MPN: n/a

General Info: Stock #: CD-171225 Location: Stone Mountain, GA Brand: Bridgeport Model: J-Head Serial #: 12/BR 151045 Year: 1972 Approx. Below is a video of it in operation. We are glad to show under power. Video will open in a new window. If you have any specific questions or would like to set up a time to view this piece of machinery feel free to contact the contact person for this listing 7 days a week. Purchaser shall pay The Equipment Hub a late penalty on all amounts over 30 days past due computed on an interest rate equal to 18% per annum. The Equipment Hub SHALL NOT BE RESPONSIBLE FOR THE CONSEQUENCES OF PURCHASER’S FAILURE TO INSPECT THE EQUIPMENT OR MERCHANDISE OR FOR ANY INACCURACIES, INSUFFICIENCIES, OR OMISSIONS IN SUCH DESCRIPTIONS, SAMPLES, TOLERANCES AND/OR SPECIFICATIONS. The employees or representatives of The Equipment Hub are not authorized to make any statement or representation as to the quality, character, size, condition, quantity, etc. Of the equipment and merchandise offered for sale inconsistent with these Terms and Conditions. Any such statements made will not be binding on The Equipment Hub or be grounds for any subsequent claim. All implied warranties of merchantability and fitness for a particular purpose are hereby disclaimed and excluded from this agreement. Care is taken to give reliable descriptions but these are not guaranteed and prospective purchasers are advised to check vital details. We also reserve the right to correct any stenographic errors. All specifications and descriptions of said goods are approximate only. THE WARRANTIES DISCLAIMED HEREUNDER INCLUDE, BUT ARE NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. No salesman or other representative of The Equipment Hub has authority to make any warranties. It is Purchaser’s responsibility to inspect the goods and to ascertain if the specifications, tolerances, descriptions and condition of the goods conform to the Purchaser’s requirements. Purchaser does hereby discharge The Equipment Hub from any and all liability directly or indirectly resulting from the presence of the aforesaid chemicals or materials, including and not limited to any and all liability directly or indirectly resulting from the failure of The Equipment Hub to give more specific warning with respect to individual articles or substances or from the inadequacy of any warning. Suggestions by The Equipment Hub regarding the design, specification, tolerances, use or suitability of the Products are made in good faith but are not binding upon any party and do not give rise to any liability by The Equipment Hub. MODIFICATIONS/ SEVERABILITY: Purchaser acknowledges that these are the only Terms and Conditions of sale, and is intended by the parties as a complete and exclusive statement of the terms of their agreement. This supersedes all prior agreements, written or oral. Any variation from the terms hereof contained in the Purchaser’s acceptance is hereby rejected. The agreement of which these terms are a part can be modified or rescinded only in writing signed by The Equipment Hub. If any provision of the invoice or these Terms and Conditions is determined illegal or unenforceable, it shall not affect the enforceability of any other provision or paragraph of the invoice or these Terms and Conditions. The remedy hereby provided shall be the exclusive and sole remedy of Purchaser and any right to consequential and incidental damages is excluded. The item “Bridgeport J-Head 9 x 36 Vertical Milling Machine, Kurt Vise & Power Feed” is in sale since Monday, December 04, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “equipmenthub” and is located in Stone Mountain, Georgia. This item can be shipped to United States.

• Brand: Bridgeport

9″x42″ 1HP Bridgeport Milling Machine, Step-Pulley, Acu-Rite DRO with scales on X&Y axis, R-8 Spindle Late model core with beautiful ways, check out the pictures. One shot lube system. Moriseiki, Mori Seiki, leblond, webb, enco, clausing, monarch, morton, bridgeport, alliant, hurco, cnc, dro, digital read out, tooling, jet, southbend, south bend, toolroom, american hole, carlton, fosdick, cincinnati. Typical response time is within 12 hours. Unless otherwise noted in the listing above, MTR will load items, as is on your truck free of charge. We deliver equipment to anywhere in the United States. Items left beyond sixty (60) days will be considered abandoned and the customer forfeits the rights to the item or items. · Payments must be received within 7 days, 1 calendar week, of end of listing. Machine Tools Rebuilt (MTR) sells all products as is unless otherwise noted in listing. Item is subject to prior sale. The item “9×42 Bridgeport J-Head Vertical Mill with Acu-Rite DRO (Late Model Core)” is in sale since Wednesday, April 26, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “jcm122286″ and is located in Carlyle, Illinois. This item can’t be shipped, the buyer must pick up the item.

• Brand: Bridgeport
• MPN: J-HEAD
• Model: J-HEAD

Thousands of Used Metalworking and Plastic Machines & New Machine Tools Photos, Full Descriptions and Prices – Fast & Easy. Manual Lathes, Mills, Drills, Saws. Planers & Planer Mills. Ovens, Furnaces & Environmental. 42 Tbl 1HP Spdl Bridgeport J-HEAD VERTICAL MILL, Step-Pulley, Chrome Ways, R-8. 42 Table 1HP Spindle Bridgeport J-HEAD VERTICAL MILL, Step-Pulley, Chrome Ways, R-8, B’port DRO, Se. Ref # : 155161 iammdna XMILLV. 9″ X 42″ BRIDGEPORT VERTICAL MILLING MACHINE. MODEL: J-HEAD, S/N: 12/BR 217241, NEW: 1981. MAXIMUM WEIGHT OF WORKPIECE……. MINIMUM / MAXIMUM THROAT DISTANCE. 80, 135, 210, 325, 660. 1115, 1750 & 2720 RPM. 0.0015″, 0.003″, 0.006. BRIDGEPORT TWO AXIS DIGITAL READOUT. SERVO POWER FEED FOR LONGITUDINAL TABLE TRAVEL. BRIDGEPORT “J” HEAD, STEP-PULLEY DRIVE. BIJUR ONE-SHOT LUBE. 1 HORSE POWER MOTOR. WIRED FOR 3 PHASE 60 CYCLE 220 VOLT OPERATION. INSPECT UNDER POWER IN OUR NEW JERSEY WAREHOUSE. Questions about this Machine? Machinery Values is one of the world’s largest machinery dealers, in business since 1971. For complete details on how this works. New machines are covered under their own warrantees. Most items in our store are located in our warehouse in Harrison, New Jersey – about 9 miles from New York City. There is no charge for this. The item “42 Tbl 1HP Spdl Bridgeport J-HEAD VERTICAL MILL, Step-Pulley, Chrome Ways, R-8″ is in sale since Thursday, August 18, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “imachine” and is located in Harrison, New Jersey. This item can be shipped to United States.

• Brand: Bridgeport
• Model: J-HEAD
• MPN: J-HEAD

READ BELOW FOR MORE INFO!!!! It is outfitted with a 9″ x 48″ table. Has a standard bridgeport style R-8 spindle. Has a 2hp 3 phase 220 or 440 volt motor. Has a servo style style power feed on the x axis, that doesnt seem to be working. The machine runs fine. It came from a local shop that closed its doors. It appears that at one time, it had a digital readout mounted on it. The reader scales are still there, but the indicator head has been removed. Both x and y feed tables are nice and tight without any major backlash. We have not cleaned the machine up, so as you can see in the pictures, it has some surface rust. We are pricing this machine inexpensively as we dont have the time to do a whole lot with it. Its a very heavy duty mill, and with a little bit of elbow grease would clean up nicely. One of the handles on the x axis is broken, but a spare is included. Also includes the knee crank. PRICED TO SELL, BUT REASONABLE OFFERS WILL BE CONSIDERED. The item “Wells index 9×48 J-head milling machine Bridgeport R-8 spindle 2 hp vari speed” is in sale since Tuesday, March 22, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “centralpennmach” and is located in Lebanon, Pennsylvania. This item can be shipped to United States.

• Brand: Kondia
• Country/Region of Manufacture: United States
• Model: 847

Economical pneumatic power draw-bar for bridgeport j-head mills, runs on pressures up to 90 psi, do not exceed that pressure. And it will give you years of faithful service. Uses the stock draw bar. Just screw the 2 extension sleeves to the 5/16 bolts on top of the mill, mount the adapter plate, and bolt the power draw bar to the plate, the 3rd stand is 3/8 shorter than the other two and as you can see from the picture sits on top of the head casting. It can be left that way, or you can drill and tap a 1/4-20 thread into the mill casting and anchor the draw bar at all 3 points. A 3/4 socket is included. Apply air pressure, set the regulator to 90 psi and you are done. J-head and the variable head bridgeport and clone models. I will try to change the picture as soon as i can.

Economical pneumatic power draw-bar for bridgeport j-head mills, runs on pressures up to 90 psi, do not exceed that pressure. And it will give you years of faithful service. Uses the stock draw bar. Just screw the 2 extension sleeves to the 5/16 bolts on top of the mill, mount the adapter plate, and bolt the power draw bar to the plate, the 3rd stand is 3/8 shorter than the other two and as you can see from the picture sits on top of the head casting.

It can be left that way, or you can drill and tap a 1/4-20 thread into the mill casting and anchor the draw bar at all 3 points. A 3/4 socket is included. Apply air pressure, set the regulator to 90 psi and you are done. J-head and the variable head bridgeport and clone models. I will try to change the picture as soon as i can.The item “Power Draw bar fits Bridgeport J-head milling machines” is in sale since Monday, March 24, 2014. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “karlcustommachineworks” and is located in Redding, California. This item can be shipped worldwide.