This is a very high precision milling machine. There are no shortcuts taken with these machines, they are absolutely top of the line! Here are some features of this milling machine. High Grade Meehanite Castings, High Grade of Cast Iron, Meehanite / Grade 250 (FC250/HT250). Cast Iron, ribbed for rigidity and strength. Be sure to ask if comparing with others. This one is 1 phase, 220 Volts, If you need Single phase. Entire Milling Head and Main Motor are made in Taiwan – only very high quality units used on. Hardened and Ground table and way surfaces greatly reduces wear, which maintains accuracy, and greatly extends machine life. Box Ways on Y axis means more surface area, and more rigidity. Massive 20 Wide Saddle, for extra table support. Turcite B way material on X and Y Axis for smoother table movements and longer machine life. Compare with others, you will notice the feel right away in the table handles. Head Swivels Left and Right, AND Tilts Front To Back. One Shot Lubrication system is standard equipment, which also extends machine life, and reduces. Oiling times of all way surfaces and lead screws to seconds, it is accomplished by simply pumping. High precision Inch Pitch lead screws, for ease of use and greater accuracy (5TPI Screws). High Precision Spindle with +/. 0002 or less runout for greater tool life and accuracy. Balanced pulleys in head for smooth and quiet operation. Full featured head with automatic quill feeds in 3 steps for boring operations. Precision Honed Quill Bore for tighter tolerance fit, which leads to improved accuracy when. Drilling and precision boring. Power Down Feed on quill is standard, in 3 steps. 006 Inches per revolution. Quill is Precision Ground, then Hard Chrome Plated for even longer life. Available with either step pulley speed changes, or variable speeds to suit the user’s preferences. Built in coolant sump in machine base. Tolerance Test Certificate included, each machine is checked for accuracy through a careful. Quality machine that exceeds their expectations. Normal wear items such as belts, bushings, etc. Table Size 9x 50. X Axis Travel 30 with power Feed Installed, with Full Way Support (Not over-traveled past ends of ways). Y Axis Travel 12. Z Axis Travel (Knee) 18. Distance, Spindle to Table 18. Leadscrew Type Precision Ground ACME Leadscrew W/ Double Nut Backlash. Adjustments on X and Y Axis. 200 (5 Threads Per Inch). Spindle Speed Range 70- 4200 RPM (variable). Speed Change Type Variable Speed/ Hi-Low Lever. Spindle Bearing Type High Precision Tapered Roller Bearings, Fully Adjustable. Spindle Bearing Class C7. Overall Height, Head Up 87. Height with head down For moving. Depth Front to back, rear of machine to front of knee casting 46. Rear of machine to tip of Y axis handle 51. Width X Axis Table Handles, Tip to Tip 68. Machine Weight 2550 LBS. Voltage / Phase 220 Volt 1 Phase, 20 Amp Circuit. Or if you would like you can pick it up at our location in Pittsburgh. If you would like to stop in and see one in person, we are at. Quality Machine Tools, 701 Parkway View Drive, Pittsburgh, PA 15205. We are machinists here too, so we know what we sell. This is really a top quality machine, and will last a long, long time. AND we are here for support too. We sell these machines regularly, we know them inside and out, and have been in business for many years, so if there is any question, we can help. NO extra charge for residential or anything on these, as long as a truck can get to you, its covered. THIS MACHINE IS NOT ABLE TO BE DELIVERED WITH A LIFT GATE. Check out our other auctions for more lathes and mills. The item “PM-950V VERTICAL KNEE MILL MILLING MACHINE 3 AX DRO, X PWR, 1PH FREE SHIPPING” is in sale since Wednesday, January 2, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “qualitymachinetools” and is located in Pittsburgh, Pennsylvania. This item can be shipped to United States.

• Model: PM-950V-1PH
• MPN: PM-950V-1PH
• Brand: Precision Matthews

Pro Tram System (Model: 01-000). Square the head of a milling machine quickly and easily. To use the Pro Tram simply lower unit to the table and adjust the head until both indicators read the same. Guaranteed to be equal to or better than any other tramming method or spindle squaring device available. Sized perfectly to fit the bed of a 6 vise allowing the head to be trammed to the vise instead of the table. Can be used with a sine bar or sine plate to adjust the head to precise angles. Calibration procedure accounts for any error introduced by worn collets. Indicator graduations available in 0.001″ and 0.0005″. Shank sizes available in 1/2″ and 3/8″. Large 2.2 easy to read indicator face. Indicator repeatability of 0.0002. Body made from red anodized aluminum. Includes calibration gage, manual and padded case. Also available is our Mini Pro Tram System designed specifically for smaller Table Top and Mini mills. The Pro Tram by Edge Technology makes the process of tramming your mill fast, easy and accurate. Tramming is the process of squaring the head of your milling machine to the table. The Pro Tram is sized to fit the bed of a 6 vise allowing you to tram directly to vise for increased accuracy. It can be used with a sine bar or sine plate to adjust the head to precise angles. Protected by one or more US patents. Please request a package invoice before you pay. We guarantee that the Pro Tram System will allow you to tram your machine with the same or better accuracy as compared to conventional tramming techniques. We also guarantee that you will be able to complete the tramming procedure with less time and effort. Related Products by Edge Technology Products. Please take a moment to check out the other high quality machinist gages and tools that we offer. The item “Pro Tram Bridgeport Head Square Knee Mill Spindle CNC Router milling endmill #01″ is in sale since Wednesday, January 16, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “edge_products” and is located in Eagle, Idaho. This item can be shipped to United States.

• Model: Pro Tram System 1/2″ Shank – 0.001 Graduation
• MPN: 01-000
• Brand: Edge Technology
• Used With: Bridgeport Mills CNC Router Knee Mill Endmill
• Used For: Tramming or Square Spindle milling machine head

HERG Automatic Lube Pump Oiler. Brand new HERG gear type automatic pump. 1 – 3 cc per cycle; 15 minute rest time. Low level alarm; 2 liter capacity. 4mm output, chained fill cap with filter. NEED PARTS FOR YOUR BRIDGEPORT? WE STOCK ALL BRIDGEPORT SERIES I REPLACEMENT PARTS! We are a distributor for HIGH QUALITY TOOLS, Inc. And carry their complete line of replacement parts and accessories. For all of your Bridgeport and other knee-mill replacement parts needs. We also carry cutting tools, work holding, tool holders, measuring tools and much much more. New inventory being added regularly! Thank You for looking! We always try to improve our customer service to ensure that you, the customer , receive best service available! Just let us send you updated invoice. We guarantee that the items are exactly as stated in the description. The item “HERG Automatic Lube Pump Oiler 110v for Bridgeport Knee Mills” is in sale since Tuesday, August 14, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “toolguys2″ and is located in Largo, Florida. This item can be shipped worldwide.

• Model: TM-315A
• Modified Item: No
• Country/Region of Manufacture: United States
• Custom Bundle: No
• Country of Manufacture: United States
• MPN: TM-315A
• Brand: HERG
• Non-Domestic Product: No

PRVOMAJSKA KNEE MILLING MACHINE. TABLE SIZE 43 X 12. IF YOU HAVE ANY QUESTIONS FEEL FREE TO ASK. The item “PRVOMAJSKA KNEE TYPE MILL MILLING MACHINE NMTB40 BRIDGEPORT” is in sale since Monday, December 3, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “tecindustrialsupply” and is located in Sidney, Ohio. This item can’t be shipped, the buyer must pick up the item.

• Model: 6-01INCH
• Country/Region of Manufacture: Unknown
• Brand: PRVOMAJSKA

LAGUN Vertical CNC Knee Mill. With Hasbach Bandit Control. This Lagun FTV-1 coupled with the proven Bandit CNC provides a well ballanced 3-Axis mill at a very attractive price. The Bandit control, one of the first CNC controls on the market, is still one of the most economical and easiest to use controls. This Lagun-Bandit machining center features feeds and speeds under NC control, contouring, a 2 HP husky spindle, and the versatile programming allowed by the CNC microprocessor. A heavy duty mill for those tough materials. 42″ x 9″ Table. Precision Ground Lead Screws. Central “one-shot” lube system. Linear and Circular Interpolation. 220 Volt, 60-Hz, 3-Phase. Specifications subject to verification. Items over 3000 lbs. Less than 12000 lbs. We will not palletize, skid or crate an item over 1000 lbs. These items are prepared for transit by wrapping the item’s electrical components with stretch wrap and spraying down any exposed metal surfaces with protective oil. These items exceed our forklift’s capacity. We may charge more in the case of items located outside our showroom. MACHINE DIMENSIONS: 50″ x 60″ x 80H. MACHINE WEIGHT: 3,000 lbs. We accept all major credit cards except American Express. Orders are not processed until theyre paid in full. The item “LAGUN FTV-1 VERTICAL CNC KNEE MILL with BANDIT Control, 42×9 Table, Tool Holders” is in sale since Thursday, November 29, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “p20933b” and is located in Chatsworth, California. This item can be shipped to United States.

• Model: FTV-1
• Brand: Lagun

The spindle was removed and sent to wells Index and had the bearings inspected and was re ground to R8. The head was taken apart and removed the grease some put in it. (it should have oil not grease). All the parts and gears look amazing, I have pictures. The oil seal was replaced for the power down feed. And it can be done without taking the machine apart. Comes with a few R8 tooling/end mills and a Jacobs ball bearing chuck. The 6 vise was also taken apart and cleaned and painted. The item “INDEX Model 55 milling machine 1955 R8 knee mill Wells Bridgeport 220V” is in sale since Monday, December 3, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “perf0rmanceplus” and is located in Klamath Falls, Oregon. This item can’t be shipped, the buyer must pick up the item.

• Brand: Index
• Country/Region of Manufacture: United States
• Bundle Listing: No
• MPN: Model 55

Used Bridgeport variable speed vertical milling machine with 9″x36″ table 1.5hp 230v 3 phase motor. Table is in average condition with scratches and dinges. The ways have light scratches but are pretty smooth almost no scrapings are visible. Machine has working quill power feed and r-8 spindle. Backlash is a little over 1/4 turn in x and y. Was repainted blue at some point and is pretty chipped up. The mill runs fine and is in average condition for its age. Head is pretty quiet. This machine can be picked up from my shop which is 10 miles south and east of downtown Saint Louis, Missouri, forklift loading is free. Please check out my other auctions. Call three one four seven five zero one four zero three with questions. Due to items not being picked up in a timely manner: Machines that are being picked up will be stored free for 14 days… The item “Bridgeport 9×36 Vertical Milling Machine Variable Speed 1.5hp Knee Type” is in sale since Thursday, December 27, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “ddmo1″ and is located in Millstadt, Illinois. This item can be shipped to United States.

• Brand: Bridgeport
• MPN: Does Not Apply

Pro Tram System (Model: 01-000). Square the head of a milling machine quickly and easily. To use the Pro Tram simply lower unit to the table and adjust the head until both indicators read the same. Guaranteed to be equal to or better than any other tramming method or spindle squaring device available. Sized perfectly to fit the bed of a 6 vise allowing the head to be trammed to the vise instead of the table. Can be used with a sine bar or sine plate to adjust the head to precise angles. Calibration procedure accounts for any error introduced by worn collets. Indicator graduations available in 0.001″ and 0.0005″. Shank sizes available in 1/2″ and 3/8″. Large 2.2 easy to read indicator face. Indicator repeatability of 0.0002. Body made from red anodized aluminum. Includes calibration gage, manual and padded case. Also available is our Mini Pro Tram System designed specifically for smaller Table Top and Mini mills. The Pro Tram by Edge Technology makes the process of tramming your mill fast, easy and accurate. Tramming is the process of squaring the head of your milling machine to the table. The Pro Tram is sized to fit the bed of a 6 vise allowing you to tram directly to vise for increased accuracy. It can be used with a sine bar or sine plate to adjust the head to precise angles. Protected by one or more US patents. Please request a package invoice before you pay. We guarantee that the Pro Tram System will allow you to tram your machine with the same or better accuracy as compared to conventional tramming techniques. We also guarantee that you will be able to complete the tramming procedure with less time and effort. Related Products by Edge Technology Products. Please take a moment to check out the other high quality machinist gages and tools that we offer. The item “Pro Tram Bridgeport Head Square Knee Mill Spindle CNC Router milling endmill #01″ is in sale since Monday, December 17, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “edge_products” and is located in Eagle, Idaho. This item can be shipped to United States.

• Model: Pro Tram System 1/2″ Shank – 0.001 Graduation
• MPN: 01-000
• Brand: Edge Technology
• Used With: Bridgeport Mills CNC Router Knee Mill Endmill
• Used For: Tramming or Square Spindle milling machine head

Welcome to Select Machine Tool. TRAK K4 Vertical Knee. Type Milling Machine With Proto TRAK SMX-3 Control. WITH NEW SPINDLE ASSY, NEW X-AXIS GIB, NEW MANUAL LUBE PUMP, AND NEW WAY COVERS. Table Size 50 X 10. T-Slots 5/8 x 3 x 2 ½. Saddle Travel 16 ½. Knee Travel 16 ½. Maximum Quill Travel 5. Quill Diameter 3 15/16. Spindle Taper NMTB 40. Spindle Speed Range 70-3950 RPM. Head Tilt 90 deg. Spindle Motor Power, Vari-speed head – 5HP. Power Requirement Control 110V; 1P; 10A. Power requirements, machine with vari-speed head – 220/440V;3P; 14/7A. Maximum Weight on Table 850 lbs. Machine Weight 3630 lbs. Machine dims l, w, h – 71 x 59 x 9. Maximum rapid feed 100 IPM. Way surface type Dovetail X, Square Y, Z. Precision 7207 CP4 spindle bearings. Chrome hardened and ground quill. Slide ways are Turcite coated. Wide way surfaces are hardened and ground. ProtoTRAK SMX System Specifications. (O) indicates optional feature. Two- or three-axis CNC, 3-axis DRO. Real handwheels for manual operation. 10.4 color active-matrix screen. P/S 2 Keyboard connector. Override of program feedrate. LED status lights built into display. 128 MB USB Thumb Drive flash memory (O). Uncluttered front panel with few hard keys. Ballscrew and motor assembly installed on quill. Software Features general operation. Clear, uncluttered screen display. English language no codes. Soft keys – change within context. Selectable two or three-axis CNC. Color graphics with adjustable views. Convenient modes of operation. Incremental and absolute dimensions. Jog at rapid with override. Powerfeed X, Y or Z. Do One CNC canned cycle. Teach-in of manual moves. Servo return to 0 absolute. Tool offsets from library. Auto Geometry Engine (O). 3-axis geometry programming (O). Tool Path programming (O). Scaling of print data (O). Multiple fixture offsets (O). Three-axis Geometry conversational programming (O). Automatic diameter cutter comp. Look graphics with a single button push. List step graphics with programmed events displayed. Conrad automatic corner radius. Math helps with graphical interface. Auto load of math solutions. Tool step over adjustable for pocket routines. Pocket bottom finish pass. Selectable ramp or plunge cutter entry. Subroutine repeat of programmed events. Rotate about Z axis for skewing data. Mirror of programmed events (O). Global data change (O). Clipboard to copy events between programs (O). Set Up Mode Features. Tool length offset with modifiers. Tool path graphics with adjustable views. Program run time estimation clock (O). Trial run at rapid. 3D CAM file program run. 3D G code file run with tool comp. Real time run graphics with tool icon. Countdown clock to next pause or tool change (O). Program In/Out Mode Features. Simple program storage to floppy. Converter for prior-generation ProtoTRAK programs. Selection of file storage locations (O). Automatic file back-up routine (O). Preview graphics for unopened files (O). Countdown clock to next pause or tool change. Total program time estimator. Scaling of print data. Tool path conversational programming. Mirror of programmed events. Copy with or without offsets. Clipboard to copy events between programs. Automatic Power Draw Bar. Stock No – KMWH stock# 04650. We want you to be happy and we also want to help you in any way possible. So that we may earn your business. We want to build relationships with our customers and the best way to do that is by providing quality products, honest representations, value, and service. Again, we want to thank you for your time and interest and we look forward to earning your business in the near future. In order for this to be an enjoyable experience, please ask all questions before purchasing. And we will try to reply within 24 hours. Thank You for stopping by and please view our other items. FOR ALL OF YOUR AIR, TOOLING, AND MACHINING NEEDS PLEASE VISIT. The item “SOUTHWESTERN INDUSTRIES TRAK K4 Knee Milling Machine With Proto TRAK SMX-3 CTRL” is in sale since Wednesday, October 10, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “selectmachine” and is located in Roanoke, Virginia. This item can’t be shipped, the buyer must pick up the item.

• Brand: SOUTHWESTERN
• Model: K4
• Custom Bundle: No
• Modified Item: No
• MPN: Does Not Apply
• Non-Domestic Product: No

BRAND NEW GENUINE ALIGN Y AXIS POWER FEED. Y Axis (Front/Back Table Travel) Power Feed Kit for Precision Matthews, Bridgeport, and Similar Knee Type Milling Machines. These are very high quality units, made in Taiwan, Not China. These are very high quality, very durable and built for every day use. Spend a little more and it will work for many years to come. This unit is brand new in the box (The one in the picture was just opened up for display, you will receive one that is brand new in the box). GET IT FAST, THESE ARE IN STOCK! SHIPS SAME DAY IF ORDERED BY 2PM EASTERN STANDARD TIME! These will fit almost any vertical knee type mill out there, Including but not limited to Bridgeport, Precision Matthews, Grizzly, Enco, Jet, Sharp, Acer, Webb, GMC, Kent, Clark, Supermax, Enco, Turn Pro, Vectrax, Acra, Birmingham, Accu, First, and many, many more if you mill has the same mounting pattern and a 5/8 Diameter shaft on the end. As long as it is the Bridgeport Type Machine, it should fit. (It will NOT fit mills with a different mounting pattern or different sized leadscrew like powermatic and some other odd sized machines, so please make sure yours is the typical Bridgeport Type as mentioned above). These use 110V, Single Phase Power, just a standard 110/120V outlet is needed. This set includes everything you should need to install this power feed, including the power feed unit, mounting bracket, drive gear, shims, safety stop with track, and hardware. If you have any questions about this unit at all, please feel free to ask. The item “ALIGN TAIWAN Y AXIS POWER FEED KNEE MILLS BRIDGEPORT & OTHER MILLING MACHINE” is in sale since Friday, September 14, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “qualitymachinetools” and is located in Pittsburgh, Pennsylvania. This item can be shipped to United States.

• Model: ALIGN-500P-Y
• Modified Item: No
• Country/Region of Manufacture: Taiwan
• Custom Bundle: No
• MPN: ALIGN-500P-Y
• Brand: Align
• Non-Domestic Product: No