BRIDGEPORT Series 1 EZ-Trak SX 2-Axis CNC Milling Machine. This is the EZ TRAK CNC Milling Machine. Combine the Series I or II Special with an easy-to-use control, and you have the EZ TRAK CNC. With the EZ TRAK, operators can alternate between manual and automatic milling as their application demands. Its two-axis control has a fully adjustable, flat screen Monitor that prompts for all machining data and signals the operator when an action is required. The control stores up to 2,000 individual operations. This Bridgeport Series I model features a powerful 2 HP spindle motor, large table travel, and automatic cutter compensation so you can use those reground milling cutters. Chrome-plated ways and a centralized, one shot lubrication system ensure a long machine life. Very good working and running condition. Feedrate Range (X, Y). 0.1 – 100 ipm. 2 – 2540 mm/min. 1219 x 229 mm. Height Above Floor max. Low 600 – 500. High 500 – 4200. 3 Phase, 50/60 Hz. 2489 x 1626 mm. Specifications subject to verification. A forklift may be required to remove the machine from its skid. The cosmoline can be removed using a light kerosene/water mixture. Listed on every item are the directions and information needed to do so. Items over 1000 lbs. Less than 3000 lbs. We will not palletize, skid or crate an item over 1000 lbs. These items are prepared for transit by wrapping the item’s electrical components with stretch wrap and spraying down any exposed metal surfaces with protective oil. This is usually the case with top-heavy items, such as grinding machines. MACHINE DIMENSIONS: 98″ x 64″ x 82H. MACHINE WEIGHT: 2200 lbs. We accept all major credit cards except American Express. Orders are not processed until theyre paid in full. This item is subject to prior sale. We reserve the right to end a listing early if the item sells through another outlet. All specifications and description of said goods are approximate only. MACHINE USE AND SAFETY. Machinery Turn-around Time – Your order is processed after it is paid for in full. Many factors come in to play when purchasing industrial equipment. Our turn-around time depends on the schedules of these outside sources. Damages- We go above and beyond to assure your item arrives safely but there have been cases when an item still gets damaged during transit. We will not be held accountable for an item damaged during transit unless it was packaged improperly. If an issue arises during transit we will do our best to represent you as our customer and resolve the issue. We specialize in reliability and quality. Our address is 20933 Plummer Street Chatsworth, CA 91311. DIRECT CAPITAL provides equipment financing for our customers. For both new and used equipment. The item “VERY NICE! BRIDGEPORT 48 x 9 Series 1 EZ-TRAK SX CNC Knee Mill” is in sale since Friday, March 17, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “p20933b” and is located in Chatsworth, California. This item can be shipped to United States.

• Brand: Bridgeport
• MPN: Does Not Apply

TOP WELL VERTICAL MILLING MACHINE. ANILAM WIZARD 450 DRO. 10″ x 50″ table. MODEL 4VK, MFG # 877646 DATE 9/98. WE WILL LOAD YOUR TRUCK FOR FREE!!! The item “Top Well, Knee Type Vertical Milling Machine, ANILAM DRO BRIDGEPORT 10×50″ is in sale since Monday, March 13, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “greg9991″ and is located in New London, Ohio. This item can’t be shipped, the buyer must pick up the item.

• Brand: Bridgeport

Tri-onics handyman 3-axis CNC machine. The WAYS are in excellent condition. This was used to mostly to cut plastic only. Tri-onics Handyman 2-axis manual CNC machine. Also included with both these machines are quick change tool holder. These machines are as is you. Be disappointed, there are also manuals with these as well. Both machines for this price. The item “Tri-onics Handyman 3-axis Power CNC Machines Knee Mill & 2-axis Price for Both” is in sale since Thursday, January 12, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “allsportsoutlet” and is located in Dayton, Ohio. This item can be shipped to United States.

Pro Tram System (Model: 01-000). Square the head of a milling machine quickly and easily. To use the Pro Tram simply lower unit to the table and adjust the head until both indicators read the same. Guaranteed to be equal to or better than any other tramming method or spindle squaring device available. Sized perfectly to fit the bed of a 6 vise allowing the head to be trammed to the vise instead of the table. Can be used with a sine bar or sine plate to adjust the head to precise angles. Calibration procedure accounts for any error introduced by worn collets. Indicator graduations available in 0.001″ and 0.0005″. Shank sizes available in 1/2″ and 3/8″. Large 2.2 easy to read indicator face. Indicator repeatability of 0.0002. Body made from red anodized aluminum. Includes calibration gage, manual and padded case. Also available is our Mini Pro Tram System designed specifically for smaller Table Top and Mini mills. The Pro Tram by Edge Technology makes the process of tramming your mill fast, easy and accurate. Tramming is the process of squaring the head of your milling machine to the table. The Pro Tram is sized to fit the bed of a 6 vise allowing you to tram directly to vise for increased accuracy. It can be used with a sine bar or sine plate to adjust the head to precise angles. Protected by one or more US patents. Please request a package invoice before you pay. Pro Tram System Demo Video. We guarantee that the Pro Tram System will allow you to tram your machine with the same or better accuracy as compared to conventional tramming techniques. We also guarantee that you will be able to complete the tramming procedure with less time and effort. Related Products by Edge Technology Products. Please take a moment to check out the other high quality machinist gages and tools that we offer. The item “Pro Tram Bridgeport Head Square Knee Mill Spindle CNC Router milling endmill #01″ is in sale since Tuesday, February 21, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “edge_products” and is located in Tucson, Arizona. This item can be shipped worldwide.

• Brand: Edge Technology
• MPN: 01-000
• Model: Pro Tram System 1/2″ Shank – 0.001 Graduation
• Used With: Bridgeport Mills CNC Router Knee Mill Endmill
• Used For: Tramming or Square Spindle milling machine head

TRAK K4SX Mill with P rotoTRAK SMX 2- Axis CNC Co n trol, 3-Axis DRO. See video below for sample demo. Please call if you’re not able to view. ProtoTRAK SMX 2-Axis CNC Control. Z-Axis Powerfeed on Knee Handle. Chrome Hardened and Ground Quill. 70 – 500 rpm 600 – 3950 rpm. Maximum Weight on Table. Max Rapid Feed X, Y. Specifications subject to verification. A forklift may be required to remove the machine from its skid. The cosmoline can be removed using a light kerosene/water mixture. Listed on every item are the directions and information needed to do so. Items over 3000 lbs. Less than 12000 lbs. We will not palletize, skid or crate an item over 1000 lbs. These items are prepared for transit by wrapping the item’s electrical components with stretch wrap and spraying down any exposed metal surfaces with protective oil. These items exceed our forklift’s capacity. We may charge more in the case of items located outside our showroom. MACHINE DIMENSIONS: 71″ x 59″ x 108H. MACHINE WEIGHT: 3630 lbs. We accept all major credit cards except American Express. Orders are not processed until theyre paid in full. This item is subject to prior sale. We reserve the right to end a listing early if the item sells through another outlet. All specifications and description of said goods are approximate only. MACHINE USE AND SAFETY. Machinery Turn-around Time – Your order is processed after it is paid for in full. Many factors come in to play when purchasing industrial equipment. Our turn-around time depends on the schedules of these outside sources. Damages- We go above and beyond to assure your item arrives safely but there have been cases when an item still gets damaged during transit. We will not be held accountable for an item damaged during transit unless it was packaged improperly. If an issue arises during transit we will do our best to represent you as our customer and resolve the issue. We specialize in reliability and quality. Our address is 20933 Plummer Street Chatsworth, CA 91311. DIRECT CAPITAL provides equipment financing for our customers. For both new and used equipment. The item “VERY NICE! TRAK K4SX 50×10 Knee Mill with ProtoTRAK SMX 2-Axis CNC, 3-Axis DRO” is in sale since Wednesday, March 01, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “p20933b” and is located in Chatsworth, California. This item can be shipped to United States.

• Brand: Southwestern Industries, Inc
• MPN: Does Not Apply
• Model: TRAK K4SX
• Country/Region of Manufacture: Taiwan

This Bridgeport Series 2 3-Axis Knee Mill has been recently retrofitted with a NUM Power Series control and new axis drives and motors. It is in very good condition. NUM 1020 Power Series. The item “Bridgeport Series 2 3-Axis Knee Mill 38 x 15 Table NUM CNC” is in sale since Tuesday, February 28, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “plcbarn” and is located in Pendleton, Indiana. This item can’t be shipped, the buyer must pick up the item.

• Brand: Bridgeport
• MPN: Series 2

This Listing is for a. This is a very high precision milling machine. There are no shortcuts taken with these machines, they are absolutely top of the line! Here are some features of this milling machine. High Grade Meehanite Castings, High Grade of Cast Iron, Meehanite / Grade 250 (FC250/HT250). Cast Iron, ribbed for rigidity and strength. Be sure to ask if comparing with others. This one is 1 phase, 220 Volts, If you need Single phase. Entire Milling Head and Main Motor are made in Taiwan – only very high quality units used on. Hardened and Ground table and way surfaces greatly reduces wear, which maintains accuracy, and greatly extends machine life. Box Ways on Y axis means more surface area, and more rigidity. Massive 20 Wide Saddle, for extra table support. Turcite B way material on X and Y Axis for smoother table movements and longer machine life. Compare with others, you will notice the feel right away in the table handles. Head Swivels Left and Right, AND Tilts Front To Back. One Shot Lubrication system is standard equipment, which also extends machine life, and reduces. Oiling times of all way surfaces and lead screws to seconds, it is accomplished by simply pumping. High precision Inch Pitch lead screws, for ease of use and greater accuracy (5TPI Screws). High Precision Spindle with +/. 0002 or less runout for greater tool life and accuracy. Balanced pulleys in head for smooth and quiet operation. Full featured head with automatic quill feeds in 3 steps for boring operations. Precision Honed Quill Bore for tighter tolerance fit, which leads to improved accuracy when. Drilling and precision boring. Power Down Feed on quill is standard, in 3 steps. 006 Inches per revolution. Quill is Precision Ground, then Hard Chrome Plated for even longer life. Available with either step pulley speed changes, or variable speeds to suit the user’s preferences. Built in coolant sump in machine base. Tolerance Test Certificate included, each machine is checked for accuracy through a careful. Quality machine that exceeds their expectations. Normal wear items such as belts, bushings, etc. Table Size 9x 50. X Axis Travel 30 with power Feed Installed, with Full Way Support (Not over-traveled past ends of ways). Y Axis Travel 12. Z Axis Travel (Knee) 18. Distance, Spindle to Table 18. Leadscrew Type Precision Ground ACME Leadscrew W/ Double Nut Backlash. Adjustments on X and Y Axis. 200 (5 Threads Per Inch). Spindle Speed Range 70- 4200 RPM (variable). Speed Change Type Variable Speed/ Hi-Low Lever. Spindle Bearing Type High Precision Tapered Roller Bearings, Fully Adjustable. Spindle Bearing Class C7. Overall Height, Head Up 87. Height with head down For moving. Depth Front to back, rear of machine to front of knee casting 46. Rear of machine to tip of Y axis handle 51. Width X Axis Table Handles, Tip to Tip 68. Machine Weight 2550 LBS. Voltage / Phase 220 Volt 1 Phase, 20 Amp Circuit. Average time delivered is 2-10 days depending on how far from Pittsburgh you are, it could be a little longer in remote places but normally is very fast. If you would like to stop in and see one in person, we are at. Quality Machine Tools, 701 Parkway View Drive, Pittsburgh, PA 15205. We are machinists here too, so we know what we sell. This is really a top quality machine, and will last a long, long time. AND we are here for support too. We sell these machines regularly, we know them inside and out, and have been in business for many years, so if there is any question, we can help. NO extra charge for residential or anything on these, as long as a truck can get to you, its covered. THIS MACHINE IS NOT ABLE TO BE DELIVERED WITH A LIFT GATE. Check out our other auctions for more lathes and mills. The item “PM-950V VERTICAL KNEE MILL MILLING MACHINE 3 AX DRO, X PWR, 1PH FREE SHIPPING” is in sale since Friday, February 24, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “qualitymachinetools” and is located in Pittsburgh, Pennsylvania. This item can be shipped to United States.

• Brand: Precision Matthews
• MPN: PM-950V
• Model: PM-950V-1PH

2008 A trump 3VK 3-Axis CNC Knee Mill. This machine is such a great machine. It is so great. Good working and running condition. Vise on table NOT included. Centroid control with LCD monitor. 3HP spindle motor, R8 spindle taper. Programmable 70 to 5,000 rpm spindle speed with Hi-Lo gear. Hardened & ground with Turcite-B coating guide way. Box ways design on Y axis to provide maximum rigidity & stability. 4.5 (Z axis). Spindle nose to table top. Spindle center to column front surface. 70 to 5000 rpm with Hi/Lo gear. Servo motors on XYZ. 0.75 kw – AC. 4 KVA, 3 Phase 208V to 230V (Max). Machine Length x Width x Height. 108″ x 77″ x 92. Specifications subject to verification. A forklift may be required to remove the machine from its skid. The cosmoline can be removed using a light kerosene/water mixture. Listed on every item are the directions and information needed to do so. Items over 3000 lbs. Less than 12000 lbs. We will not palletize, skid or crate an item over 1000 lbs. These items are prepared for transit by wrapping the item’s electrical components with stretch wrap and spraying down any exposed metal surfaces with protective oil. These items exceed our forklift’s capacity. We may charge more in the case of items located outside our showroom. MACHINE DIMENSIONS: 108″ x 77″ x 92H. MACHINE WEIGHT: 3,200 lbs. We accept all major credit cards except American Express. Orders are not processed until theyre paid in full. This item is subject to prior sale. We reserve the right to end a listing early if the item sells through another outlet. All specifications and description of said goods are approximate only. MACHINE USE AND SAFETY. Machinery Turn-around Time – Your order is processed after it is paid for in full. Many factors come in to play when purchasing industrial equipment. Our turn-around time depends on the schedules of these outside sources. Damages- We go above and beyond to assure your item arrives safely but there have been cases when an item still gets damaged during transit. We will not be held accountable for an item damaged during transit unless it was packaged improperly. If an issue arises during transit we will do our best to represent you as our customer and resolve the issue. We specialize in reliability and quality. Our address is 20933 Plummer Street Chatsworth, CA 91311. DIRECT CAPITAL provides equipment financing for our customers. For both new and used equipment. The item “2008 ATRUMP 3VK 3-AXIS CNC KNEE MILL with Centroid Ctrl, 10×54 Table” is in sale since Wednesday, February 22, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “p20933b” and is located in Chatsworth, California. This item can be shipped to United States.

• Brand: Atrump
• Model: 3VK

(1) BRIDGEPORT CNC Knee Type Vertical Milling Machine. Series: 2 Serial: 2J-149872. 11 x 54 Table. Bridgeport V2XT CNC Control System. Servo Driven Feed On Table Left & Right & Quill (X, Y and Z axis). 230/460 Volt, 60 Hz, 3 Phase. This item is available, subject to prior sale. ONE OF OUR TWO. CLEVELAND, OHIO AREA LOCATIONS. It is agreed and understood that purchaser assumes this responsibility and the above is an integral part of this sale. All sales are F. Cleveland, Ohio unless otherwise specified. The item “Bridgeport CNC Knee Type Vertical Milling Machine Used AM16208″ is in sale since Tuesday, February 14, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “allsetmachine” and is located in Cleveland, Ohio. This item can be shipped to United States.

• Brand: Bridgeport
• Model: Series 2

You are looking at a new X Axis Power Feed for Bridgeport and Similar Knee Type Milling Machines. These will fit almost any vertical knee type mill out there with the 5/8 Shaft End, Including but not limited to Bridgeport, Precision Matthews, Grizzly, Enco, Jet, Sharp, Acer, Webb, GMC, Kent, Clark, Supermax, Enco, Turn Pro, Vectrax, Acra, Birmingham, Accu, First, and many, many more. As long as it is the Bridgeport Type Machine, it should fit. This set includes everything you should need to install this power feed, including the power feed unit, table mounting bracket, drive gear, shims, safety stop, and hardware. These use 110V, Single Phase Power, just a standard 110/120V outlet is needed. If you have any questions about this unit at all, please feel free to ask. Our Part # PF-X-AL310SX. The item “X AXIS POWER FEED KNEE MILLS FITS BRIDGEPORT & OTHER MILLING MACHINE FREE SHIP” is in sale since Friday, January 27, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “qualitymachinetools” and is located in Pittsburgh, Pennsylvania. This item can be shipped to United States.

• Brand: PRECISION MATTHEWS T-ONE
• MPN: PF-X-AL310SX
• Model: PF-X-AL310SX