1990 Haas VF-1 Vertical Machining Center VMC CNC. Machinery in plant and under power. Plant shutting down November 1st. This machine available for new owner on November 4th! The item “MAKE OFFER 1990 Haas VF-1 Vertical Machining Center VMC CNC” is in sale since Friday, September 4, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “metalworki-28″ and is located in South Bend, Indiana. This item can’t be shipped, the buyer must pick up the item.

• Brand: Haas
• Model Year: 1990
• Control: CNC
• Machine Type: Machining Center

CNC mill, VMC Romi D400 Mini Mill, FANUC, MUST SELL MAKE AN OFFER!!! This is a Romi D400 12X16 minimill. It is one of several machining centers in our shop, the others get the majority of the work, so this little guy only gets used for the occasional little job and making fixtures. It had about 400 hours on it when we bought it new from the dealer because they were cutting air in their showroom. Those hours were zeroed out when we got it. I put another 2600 hours on it for a total of about 3,000 total running hours. It still jogs back and forth cleanly in. 0001 (tenths) and the ways and screws still sound like it did when it was new. It’s barely broken in. We bought this machine for a specific aluminum job but it does okay in most anything. We’ve cut steel, aluminum and plastics including acrylic and phenolic but we’ve never cut abrasive materials like G10, carbon fiber or cast iron on this machine. We have always fed it clean, dry, filtered air. This is a small machine, it is 6 feet wide and 7 feet deep and 7 feet tall with the head down. You could probably just squeeze it under a 7′ garage door if you remove the door trim. It is 220V three phase but it will run fine on a good rotary phase converter. I bought this mill instead of a Haas Minimill because it has 14″ Z travel rather than 10″ so it doesn’t stuff long tools like drills into your work during a tool change and it also has 14 tools rather than 10, and a 7,500 RPM spindle rather than 6,000. Also, it weighs around 6,000 pounds, almost twice as much as the little Haas, which gives it more grunt behind the cut, which helps your surface finish, material removal rates and tool life. The only things I don’t like about this mill is the spindle and servos are belt driven with cogged belts, like a Haas, which seem loud in a shop full of direct drive Mori, and it has a little coolant leak out the back which we put a little pan under and dump once or twice a month. The Fanuc OMi Mate control is bullet proof and has never malfunctioned. It has about 256K memory in the control and it also has a PCMCIA slot for running programs of practically unlimited size. It is full three axis linear interpolation with circular and helical interpolation. You can rigid tap (the spindle has an encoder on it) and thread mill with it. However I need to get this off my floor as soon as possible because we have a “new” machine that arrives in about 10 days and I need this out of here ASAP. So, I will consider all offers and accept the best offer in this time frame. We can load here for free on your truck. Also, if you’re local I can help you unload it and skate it into place. Includes all manuals and an old Kurt vise. We also have a ton of tool holders in excellent condition that fit this machine we could sell cheap in a side deal. The item “LOW HOUR CNC mill, VMC Romi D400 Mini Mill, FANUC, MUST SELL MAKE AN OFFER” is in sale since Thursday, October 29, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “aim_industrial” and is located in Mooresville, North Carolina. This item can’t be shipped, the buyer must pick up the item.

• Brand: Romi
• Function: Milling
• Control: Fanuc
• Model Year: 2004
• X-Axis Travel Bed: 16 in – 20 in
• Model: D400
• Max Spindle Speed (RPM): 7500
• Power Source: Electric
• Machine Type: Machining Center
• Voltage: 220 V
• Y-Axis Travel Bed: 10 in – 15 in
• Spindle Taper: BT40
• Spindle Horsepower: 5 – 7.5

COMPLETE SYSTEM READY TO MAKE PARTS. Boxford model 190VMCxi, 3 axis CNC Vertical Machining Center featuring Boxfords. Complete Software Programming package consisting of Cad/Cam software, G & M code. Input, Manual data Input, Graphical views, Full 3D Simulations, Conversational Programming, Boxfords Image Relief and Boxfords 3 D GeoCam, and Full Tool Library, Material Library and Context Sensitive Help Library. The all Cast Iron design allows the Rigidity for the Machine to cut STEEL at a very impressive rate. X (longitudinal) 10.039. Y (cross) 5.9. Z (vertical) 5.5. Spindle to column 5.1. Distance spindle to table 7.95. 196 to 5.15. Working Table area 14.56 x 5.11. Tee slots 2 x 10 mm x 100 mm centres. Rapid traverse at 100% 78.74 IPM. 393 IPM to 78.74 IPM. Spindle speed range 350rpm to 3500 rpm (programmable & variable). Bed Hardened and precision ground. Machine Dimensions 31.4(L) x 26.7(W) x 25.5 (H). 110 Volt Electric’s. 0.45 kw (0.6 HP). Thyristor drive package with overload protection. DC stepping type – 400 steps/rev with bi-polar. Chopper drives allowing simultaneous movement. 1 – Machine Vise. 5 – Quick Change End Mill Holders. 1 – 2mm End Mill. 1 – 4mm End Mill. 1 – Image Relief and 3-D GeoCam Cutters 2 Pcs. 1 – ER25 Collet Vice. 1 – Collet Wrench. Dell Computer windows XP, keyboard , mouse, and software. All Cables from Computer to Machine. WATCH OUR VIDEOS OF THIS MACHINE MAKING 4 DIFFERENT PARTS. The item “BOXFORD VMC190xi CNC MILLING MACHINE COMPLETE SYSTEM READY TO MAkE PARTS” is in sale since Monday, October 5, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “amanus” and is located in China Grove, North Carolina. This item can’t be shipped, the buyer must pick up the item.

• Model: VMC190xi
• Spindle Horsepower: 3/4 hp
• Country/Region of Manufacture: United Kingdom
• Custom Bundle: Yes
• Machine Type: Milling Machine
• Table Length: 15 in – 19.9 in
• Max Spindle Speed (RPM): 350 – 3500
• Power Source: Electric
• X-Axis Travel Bed: 10 in – 15 in
• Y-Axis Travel Bed: Less than 10 in
• Z-Axis Travel Bed: Less than 10 in
• Spindle Taper: 30 Taper
• Brand: BOXFORD
• Table Width: Less than 10 in
• Bundle Description: COMPUTER, MONITOR, SOFTWARE,TOOLING,VICE
• Control: CNC
• Voltage: 110 V

Looking for a swift sale, please make offer. The item “Bridgeport Milling Machine. Looking for a swift sale, please make offer” is in sale since Monday, July 20, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “joseph3kd4″ and is located in Palo Alto, California. This item can’t be shipped, the buyer must pick up the item.

We are pleased to offer the following for your consideration. Type: CNC Vertical Mill. Table Size: 33″ x 15″. Travels (X, Y, Z): 22″ x 14″ x 14. Approx Weight: 7000 LBS. Approx Dimensions (overall): 111″ x 136″ x 94. The only way we can communicate with you is through the. Encourages first-hand inspection of all used machinery. That is UNDER POWER and Available for Inspection. Please verify all of the specs listed for this machine. Expressed or implied these specs to be accurate. The item “Hurco BMC-20 3 Axis CNC Vertical Machining Center Cheap! Make Offer! Video” is in sale since Thursday, January 3, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “revelationmachinery” and is located in Somerset, Massachusetts. This item can be shipped to United States.

• Make: Hurco
• Model: BMC-20
• Type: CNC, Vertical
• X-Axis Travel Bed: 21” – 25”
• Y-Axis Travel Bed: 10” – 15”
• Z-Axis Travel Bed: 10” – 15”
• Highest Spindle Speed (RPM): 5001 – 7500
• Table Width: 15” – 19.9”
• Table Length: 30” – 34.9”
• Spindle Horsepower: 10