Used Rong Fu Arfa RF-31N2F Mill/Drill for sale. Serial#: 232978 New in 2002. 1 HP motor, 220V Comes on stand. Uses R8 collets and comes with drill chuck. Check out my other items. AS IS, WHERE IS. 2 WEEKS TO CLEAR BEFORE ITEM IS RELEASED. INTERNATIONAL SALES MUST BE PAID BY WIRE TRANSFER. NO CREDIT CARDS ACCEPTED. NO CHARGE TO LOAD ON TRUCK IF UNDER 7,500 LBS – IF OVER ADDITIONAL CHARGES APPLY. Used machines may not incorporate approved activating mechanisms, operator safety devices, or safety guards, as required by OSHA or otherwise. It is the purchasers responsibility that the said used machines be so equipped and safe-guarded to meet OSHA and other requirements before placing such machinery into operation. The covenants expressed herein shall be servable, and the invalidity, now or in the future of any of the covenants recited. Herein shall not affect the validity of the remaining covenants. Under no circumstances shall we or any affiliate of ours have any liability whatsoever for the loss of use or for any indirect or consequential damages. The item “Rong Fu Arfa RF-31N2F Mill/Drill” is in sale since Wednesday, April 01, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “0030777″ and is located in Warminster, Pennsylvania. This item can be shipped to United States.

• Brand: Rong Fu
• MPN: Does Not Apply

Jet 350018 JMD-18 Mill/Drill With R-8 Taper 115/230V 1Ph. Jet 350018 JMD-18 Mill/Drill With R-8 Taper 115/230V 1Ph Mill drills are a lighter alternative to a milling machine. These combine a belt driven drill press with the dual coordinate abilities of the milling machine’s table for flexibility and efficiency. A locking collet prevents the cutting tool from falling away from the spindle when lateral forces are experienced against the bit. Although light in construction, the JMD Milling Drilling Machines possess the advantages of space-saving versatility, affordability and light machining capability. Features: For added safety, the JMD-18 follows strict guidelines and electrical requirements to be certified by CSA Group One-piece cast iron column for added support Belt cover with quick slide latch allows faster belt adjustment to change spindle speeds Base taper allows for easier clean up Drill Press angle vise UL Listed motor Extra large worktable Positive quick-stop knob and easy to read internal depth gauge 360 head swivel Work lamp Forward and Reverse Switch drill chuck, chuck arbor Draw bar Drill Chuck Guard Adjustable Carbide facemill Specifications: Drilling Capacity In. : 1-1/4 Face Mill Capacity In. : 3 End Mill Capacity In. : 15-7/8 Max Distance Spindle to Table In. : 18 Spindle Taper In. X TPI: R-8 Spindle Travel In. : 5 Quill Diameter In. : 3 Column Diameter In. : 4-1/2 Number of Spindle Speeds: 12 Range of Spindle Speeds (RPM): 150 – 3,000 Table Size (L x W) In. : 9-1/2 x 32-1/4 Table Longitudinal Travel In. : 20-1/2 Work Table Weight Capacity Lbs. : 400 T-Slots Number and Size In. : 4 and 5/8 T-Slot Centers In. : 1-13/16 Base Dimensions In. : 15-3/4 x 23-3/4 Motor (HP): 2 HP, 115/230V, 1Ph Overall Dimensions (L x W x H) In. : 47 x 40 x 51 Weight Lbs. Warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these JPW Industries, Inc. The item “Jet 350018 JMD-18 Mill/Drill With R-8 Taper 115/230V 1Ph” is in sale since Friday, May 26, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “fastoolnow” and is located in La Vergne, Tennessee. This item can be shipped to United States.

• Brand: JPW Industries
• MPN: 350018

JET 350017 JMD-15 Mill/Drill With R-8 Taper 115/230V 1Ph. Jet 350017 JMD-15 Mill/Drill With R-8 Taper 115/230V 1Ph Mill drills are a lighter alternative to a milling machine. These combine a belt driven drill press with the dual coordinate abilities of the milling machine’s table for flexibility and efficiency. A locking collet prevents the cutting tool from falling away from the spindle when lateral forces are experienced against the bit. Although light in construction, the JMD Milling Drilling Machines possess the advantages of space-saving versatility, affordability and light machining capability. Features: For added safety, the JMD-15 follows strict guidelines and electrical requirements to be certified by CSA Group One-piece cast iron column for added support Belt cover with quick slide latch allows faster belt adjustment to change spindle speeds Base taper allows for easier clean up Drill Press angle vise UL Listed motor Extra large worktable Easy to read external depth gauge 360 head swivel Work lamp drill chuck, chuck arbor Draw bar Drill Chuck Guard Adjustable Carbide facemill Specifications: Drilling Capacity In. : 1 Face Mill Capacity In. : 2-1/2 End Mill Capacity In. : 14-1/2 Max Distance Spindle to Table In. : 15 Spindle Taper In. X TPI: R-8 Spindle Travel In. : 3-1/2 Quill Diameter In. : 2-7/16 Column Diameter In. : 3-5/8 Number of Spindle Speeds: 12 Range of Spindle Speeds (RPM): 110 – 2,580 Table Size (L x W) In. : 7-1/2 x 23 Table Longitudinal Travel In. : 14 Work Table Weight Capacity Lbs. : 350 T-Slots Number and Size In. : 4 and 9/16 T-Slot Centers In. : 1-13/16 Base Dimensions In. : 12-1/2 x 19-3/4 Motor (HP): 1 HP, 115/230V, 1Ph Overall Dimensions (L x W x H) In. : 38 x 37-1/2 x 42 Weight Lbs. Warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these JPW Industries, Inc. The item “JET 350017 JMD-15 Mill/Drill With R-8 Taper 115/230V 1Ph” is in sale since Friday, May 26, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “fastoolnow” and is located in La Vergne, Tennessee. This item can be shipped to United States.

• Brand: JPW Industries
• MPN: 350017

Grizzly Heavy-Duty Mill/Drill with Power Feed. High-precision P5 spindle bearings and dovetail ways make this Heavy-Duty Gear-head Mill/Drill a serious contender for those who need a precision machine that is also heavy-duty enough to be pushed hard when projects need to get done quickly. The 2HP, 220V, single-phase motor offers plenty of power for big cuts, and the variable speed power feed makes it easy to dial in the perfect cutting speed for optimum results. Spindle speeds are changed using gear-head levers (instead of moving V-belts on pulleys), making it much faster and more convenient. Head positioning around the workpiece is extremely versatilethe head tilts 90° left or right, rotates 360° around the column, and has a 14-1/2 range of Z-travel movement. The spindle has 5 of downfeed travelwith both coarse and fine downfeed controls. Weve also included a nice package of standard equipment, including spindle adapters for MT#2 or MT #3 tooling, a drill chuck with arbor, T-slot bolts and nuts, and a toolbox with service wrenches. Made in an ISO 9001 factory! Motor: 2 HP, 220V, single-phase, 1725 RPM, 8.6A. Distance spindle to table: 17. Table size: 8-1/4″ x 28-3/4″. Table travel (longitudinal): 14-1/2. Table travel (cross): 8. Spindle speeds: 90, 210, 345, 670, 1180, 1970 RPM. Drawbar size: 7/16-20. Face mill capacity: 3. End mill capacity: 1-3/16. Head tilt left and right: 90° L, 90° R. Table T-slots: 3 at 2-1/2″ centers, 1/2″ wide. Overall dimensions: 47″ W x 56″ H x 31 D. Base footprint: 16″ W x 24″ D. Working envelope: 62-1/2″ W x 56″ H x 42 D. High-precision P5 (ABEC-5 equivalent) spindle bearings. Spindle speeds change with convenient gear-head levers instead of V-belts. Head tilts up to 90° left or right and swivels up to 360° around the column. Longitudinal variable speed power feed. Table is coolant system ready and moves along precision-ground dovetail ways. Fine downfeed control and adjustable depth stop. Made in ISO 9001 factory. Spindle adapter R-8 x MT#3. Spindle adapter MT#3 x MT#2. Drill chuck arbor and 113mm drill chuck. T-slot bolts with nuts. Drift key for tool removal. Bottle for lubrication maintenance. We are committed to your satisfaction. What Are My Options? Since our inception in 1983, Grizzly Industrial®, Inc. Has grown into one of the largest machinery companies in the United States. Our products can be found in all sizes of shops from the large industrial production users to the smaller cabinet and machine shops. We have the widest product selection under one brand in the world and we sell direct to the user, cutting out the dealer network, and resulting in lower prices to you. We ARE Grizzly Industrial, Inc. We reserve the right to correct errors and omissions in our listings, including specifications, photographs, and pricing. Thank you for your interest. The item “G0754 Grizzly Heavy-Duty Mill/Drill with Power Feed” is in sale since Thursday, April 13, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “grizauctions” and is located in Bellingham, Washington. This item can be shipped to United States.

• Brand: Grizzly
• MPN: G0754
• Country/Region of Manufacture: China
• Item Location: Springfield, MO or Bellingham, WA
• Box Weight & Size: 706 lbs., 46″ L x 30″ W x 47.25″ H
• Buyer Requirements: Two Prior eBay Purchases

Jet JMD-18 Mill/Drill CNC Conversion with Cabinet Stand. 11 piece R8 collet set 1/8″, 3/16″, 1/4″, 5/16″, 3/8″, 7/16″, 1/2″, 9/16″, 5/8″, 11/16″, 3/4. 10 PC 4 flute HSS end mill set 3/16″x3/8″, 1/4″x3/8″, 5/16″x3/8″, 3/8″x3/8″, 7/16″x3/8″, 1/2″x1/2″, 9/16″x1/2″, 5/8″x5/8″, 11/16″x5/8″, 3/4″x3/4″. 58 piece clamp down set. Table T-Slot size: 5/8. Stud size: 1/2-13. Includes: 24 studs (4 pieces of each 3″, 4″, 5″, 6″, 7″, 8″ long), 6 step block pairs. 6 T-nuts, 6 flange nuts, 4 coupling nuts, 6 end hold-downs, Wall case. Adjustable Wrench with Measuring Scale, 10″ Overall Length, 1-3/8″ Jaw Capacity. 1/2 Square Drive High-Torque Ratchet Wrench. High-Torque Grip-Plus Combination Wrench, 3/4″ Size, 11″ Long. 1 Quart of MOBIL Vactra Way Oil #2. Swivel Leveling Mount, Nickel-Plated Steel, with Pad, 1/2″-13 x 4″ Long Thread, 3750 lb. High-Strength Grade 8 Steel Cap Screw, 3/4″-10 Thread, 6″ Long, Zinc-Plated. Zinc Yellow-Chromate Plated Steel Hex Nut, Grade 8, 3/4″-10 Thread Size, 1-1/8″ Wide, 41/64 High. Zinc Yellow-Chromate Plated Steel Flat Washer, Grade 8, Oversized, 3/4″ Screw Size, 0.812″ ID. JET Tools JMD-18 & JMD-18PF Operator’s Instructions and Parts Manual. I had intended to change it back to a manual mill and then sell the CNC components as I know very little about operation of CNC machinery. Let alone the software and hardware side. And before learning that the exorbitant prices of Jet OEM parts would make it cost prohibitive to convert back to manual. The machine appears to have been well maintained. I put a 110 plug to test out the motor. It looked to have to been hard wired, possibly to 220. It is very quiet and all the belts are in good shape. The X and Y axis have what appear to be some nice adjustable double ball nuts that have zero backlash when turned by hand. And the Z axis has a gas shock maintaining downward pressure also leaving zero backlash. The table has one spot were it looks like someone walked away from the machine while it was running, otherwise in good condition. I do not know what kind of software is needed to run this machine. The machine did not and does not come with a computer or data cables. Hopefully the photo of the “Geckodrive” cards can give some insight into what software is compatible for this machine. Feel free to ask any questions. 41″w x 39″d x 72h approximately. The item “Jet JMD-18 Mill/Drill CNC Conversion With Stand And Tooling Milling Machine” is in sale since Thursday, June 30, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “plastic_organic” and is located in Los Angeles, California. This item can’t be shipped, the buyer must pick up the item.

• Brand: Jet
• MPN: JMD-18
• Country/Region of Manufacture: Taiwan
• Model: JMD-18

Re-Listed from last week when we decided to end it before it was too late to end, because we got an inquiry about how it runs, does the powerfeed work and we did’nt know at that time. Today 4/5/16 we powered it and it runs great and the powerfeed works too. Check out all (31) Photos. Don’t miss out on this one, it’s the nicest one we have ever had. This unit has a 2 HP 1-Phase 115/230V motor with forward and reverse operation. A step-pulley provides 12 different spindle speeds. Also equipped with Power Quill Feed. Most items are new and/or like new condition. (Table Top on the Cabinet is 9/16 thick steel plate). The heavy-duty locking wheels on the cabinet allows for easy movement in your shop and perfect for the garage. We have a fork lift and will load your truck for Free. DIMENSIONS: L-R x F-B x H: 48″ X 52″ X 83 HIGH APPROXIMATE WEIGHT: 1,150 LBS. Please feel free to come and inspect in person. Call for appointment and directions to our warehouse. We have a forklift and can load for free. INSPECTIONS: Please feel free to call me to inspect and/or discuss anything you cannot see in the photos. Also we encourage you to come and inspect this machine in person. Please call for appointment. KEEP SCROLLING DOWN TO SEE ALL (31) PHOTOS. Winning buyers and/or offers please respond within (3) days from close of sale. C L I C K pictures for larger version. The item “ENCO Mill/Drill Machine 2 hp Loaded With Tooling on Portable Cabinet NO-RESERVE” is in sale since Tuesday, April 05, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “caltools” and is located in Santa Paula, California. This item can be shipped to United States.

• Brand: ENCO
• MPN: 105-1300
• Country/Region of Manufacture: Taiwan
• Model: Mill Dril Machine

Check out all (31) Photos. If your using a mobile device, please look at the Item description “>” to see all the photos listed. Otherwise it appears on mobile device screens as only having (1) photo. Don’t miss out on this one, it’s the nicest one we have ever had. This unit has a 2 HP 1-Phase 115/230V motor with forward and reverse operation. A step-pulley provides 12 different spindle speeds. Also equipped with Power Quill Feed. Most items are new and/or like new condition. (Table Top on the Cabinet is 9/16 thick steel plate). The heavy-duty locking wheels on the cabinet allows for easy movement in your shop and perfect for the garage. We have a fork lift and will load your truck for Free. DIMENSIONS: L-R x F-B x H: 48″ X 52″ X 83 HIGH APPROXIMATE WEIGHT: 1,150 LBS. Please feel free to come and inspect in person. Call for appointment and directions to our warehouse. We have a forklift and can load for free. INSPECTIONS: Please feel free to call me to inspect and/or discuss anything you cannot see in the photos. Also we encourage you to come and inspect this machine in person. Please call for appointment. KEEP SCROLLING DOWN TO SEE ALL (31) PHOTOS. Winning buyers and/or offers please respond within (3) days from close of sale. C L I C K pictures for larger version. The item “ENCO Mill/Drill Machine 2 hp Loaded With Tooling on Portable Cabinet NO-RESERVE” is in sale since Wednesday, March 23, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “caltools” and is located in Santa Paula, California. This item can be shipped to United States.

• Brand: ENCO
• MPN: 105-1300
• Country/Region of Manufacture: Taiwan
• Model: Mill Dril Machine

Very nice mill/drill perfect for garage or small shop use. I bought this many years ago and have used it very little. It works very well and is 110V, has forward and reverse switch, spindle has R8 taper, and a 20 table with no scars or holes. It has fine feed as well as fast feed on the spindle. The stand comes with it and it is 28 high. It comes with a fly cutter and drill chuck that came with the machine originally. The vice does not go with it. The item “Mill/Drill milling machine, 110V. 12 speed, 20 table and stand” is in sale since Wednesday, August 05, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “hatesuserid” and is located in Clovis, California. This item can’t be shipped, the buyer must pick up the item.

• Country/Region of Manufacture: Taiwan
• Brand: Rong Fu
• Model: RF20

FREE LOCAL PICK-UP AVAILABLE. ZERO BACKLASH BALL SCREWS ON ALL AXIS. RELIANCE USA DC BRUSH SERVO MOTORS. 48V 20A LINEAR SERVO POWER SUPPLY. HEDS ENCODERS ON Y & Z axis – AMT ENCODER ON X AXIS. SERVOS WORK PERFECT IF YOU USE G320 GECKODRIVES. 115V Z AXIS ELECTRIC BRAKE (LOCKS AXIS WITH POWER OFF). MANUAL MACHINING MODE – HAND WHEELS ON ALL AXIS. R-8 SPINDLE WITH SPINDLE LOCK FOR QUICK TOOL CHANGE. 2HP MARATHON INVERTER DUTY SPINDLE MOTOR. DIRECT SPINDLE DRIVE VIA TIMING BELT TO SPINDLE. 5000 RPM SPINDLE WITH ABEC-7 ANGULAR CONTACT BEARINGS. GAS SPRINGS ON Z AXIS TO OFFSET HEAD WEIGHT. This mill is a great starting point for building a PC based CNC mill. All of the mechanical engineering work has already been done and functions perfectly. Attach a control box, add a frequency drive, breakout board, and D. C servo drivers such as 320 Geckodrives and you are set to run with Mach 3 / 4 software. I have operated this mill for several years in my home shop with great results. The crate will be built from 2 x 12 planks on 4 x 4 base blocks with 1/2 plywood exterior and 2 x 4 interior bracing. The item “CNC MILLING MACHINE ENCO MILL/DRILL MACH 3-4 RELIANCE SERVOS BALLSCREWS” is in sale since Monday, July 27, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “fprdnman778″ and is located in Willis, Texas. This item can be shipped to United States.

• Brand: Enco
• Model: F45

Bolts up to the Compact 5 (and possibly 8) lathe, bolts included. Can be used for light milling or as a mini drill press. Replaced the original pinion shaft with a hardened O-1 unit and installed bronze bushings in the housing, very smooth. Basic machine, check my other listings for accessories. The item “EMCO Compact 5 Mill/Drill attachment” is in sale since Tuesday, June 30, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “tkeeley” and is located in Mississauga, Ontario. This item can be shipped to North, South, or Latin America, to all countries in Europe, to all countries in continental Asia, to Australia.

• Country/Region of Manufacture: Austria
• Brand: Emco