Jet JMD-18 Milling Drilling Machine 2 HP BRAND NEW MILL DRILL 1 Phase With Stand.

Bridgeport Series I, 2 HP Vertical Mill Milling Machine 9×48 Table Single Phase.

McLaren Bridgeport Series 1 Direct Replacement Milling Machine Head. 3 HP with R8 Spindle. Easy Bolt-on Direct Plug-n’-Play Install. Will bolt onto any Bridgeport Series 1 Knuckle or Equivalent. Our Replacement Head has 3 HP vs. Bridgestone’s Series 1 1.5 HP Head. We recommend McLaren replacement milling machine heads over overhauled Bridgeport heads because most overhauled Bridgeport heads use the same gears and other already used parts. It is impossible for an overhauled Bridgeport head with formerly used parts to match the precision of a new McLaren head with all new parts. Spindle Taper (uses drawbar): R8. Spindle Rotation: Forward and Reverse. Spindle Speeds – Infinitely Variable. Back Gears: 70 to 525 RPM. Direct Drive: 500 to 4200 RPM. Quill Feeds (3) – Per Spindle Revolution: 0015″, 0.003″, 0.006. 3 PHASE MOTOR VOLTAGE. Low Voltage: 208 – 220 – 230 – 240. High Voltage: 440 – 460 – 480. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “wells-index” and is located in this country: US. This item can be shipped to United States.

• Brand: McLaren
• Spindle Horsepower: 3 hp
• Machine Type: Milling Machine
• Max Spindle Speed (RPM): 500-4200

Very nice knee mill, Enco base with eagle (like Seiki XL) head converted from mechanical varidrive to fixed pulley belt with variable frequency drive and baldor 3hp inverter duty motor. Erickson quick change qc 30 taper spindle with wrench and one tool holder. No messing with a drawbar wrench, this is 1/4 turn quick release right at the spindle and your cutter is always the same length, no fooling with adjusting cutter up and down in an r-8 collet. One shot oiler, power feed on x axis, power vent fan on motor, vise included. This unit runs on regular single phase 230v power and you can vary the speed right at the inverter drive mounted on the head. Good ways, good candidate for a cnc conversion- the ac drive can be controlled by your cnc controller should you eventually go that route. In zip code 30527. Contact for clarification if this is unclear. Look at ALL of the photos. If you do not respond after the 3. Jelly on the right side of the listing page, then “contact member” link on the left side of the next page. “COMMERCIAL ADDRESS” MEANS A LICENSED BUSINESS WITH A SIGN OUT FRONT AND DOCK OR LIFT. This could be hundreds of dollars difference. For our location google Clermont GA 30527 or industrialtoolandmachineworks (one word). If damaged in transit you will need to file the claim. CONDITION: Every attempt is made at accurate description. ASK for full res photos, video of operational testing, etc. Photos may have distortion, are for general scale only. Do not rely on photos even with rulers for critical dimensional data or quantity. Opinion of condition is only that, an opinion. SOME ITEMS MAY HAVE DUST, DIRT, PAINT, ENGRAVING OR GREASE, CORDS MAY HAVE REPAIRS. HARDWARE NOT SHOWN IS NOT INCLUDED. Ask for better pics if you care. All items subject to local sale while listed. DO NOT JUST ASK FOR UPS RED. THERE ARE 6 DIFFERENT SPEEDS OF UPS: Ground, 2. Day air end of day for about 2x ground price, next day air saver for about 2x 2. Day air price, next day air 10:30am (add about 10%), and next day air 8am for about 2x the 10:30am price. If that data is incorrect you may never get your package, so make sure your info is current. We have absolutely no control over time in transit with any carrier. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “tom.jelly” and is located in this country: US. This item can be shipped to United States.

• Spindle Horsepower: 3 hp
• Machine Type: Vertical Milling Machine
• Power Source: Electric
• Custom Bundle: No
• Spindle Taper: QC 30
• Modified Item: No
• Brand: Unbranded
• Function: Drilling, Milling
• Control: Automatic, Manual, Semi-Automatic
• Max Spindle Speed (RPM): 4200
• Voltage: 240 V

Bridgeport Series I, 2 HP Vertical Mill Milling Machine 9×48 Table Single Phase. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “amiron_machinery” and is located in this country: US. This item can be shipped to United States.

• Spindle Horsepower: 2 hp
• Brand: Bridgeport
• Function: Drilling
• Machine Type: Milling Machine
• Table Length: 40 in – 59.9 in
• Voltage: 230 V
• Model: Series I
• MPN: 32356465768789654354568
• Table Width: Less than 10 in

Jet JMD-18 Milling Drilling Machine 2 HP BRAND NEW MILL DRILL 1 Phase With Stand. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “amiron_machinery” and is located in this country: US. This item can be shipped to United States.

• Model: Jet JMD-18
• Spindle Horsepower: 2 hp
• Machine Type: Mill Drill
• Function: Drilling
• Brand: JET

JET 350018 JMD-18 1 Phase Drilling and Milling Machine. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “victoma10″ and is located in this country: US. This item can be shipped to United States.

• UPC: 0662755103902
• Brand: JET
• Spindle Horsepower: 2 hp
• Function: Drilling, Milling
• Control: Manual
• Model Year: 2014
• Machine Type: Mill Drill
• Power Source: Electric
• Voltage: 230 V
• Model: 350018
• MPN: 350018
• Spindle Taper: R-8

BRIDGEPORT SERIES II MILL MACHINE 460v 3 phase quill power feed. These last forever and rarely need maintenance. This is a 460v 3 phase machine. Functioning machine that came from a machine shop that closed due to retirement. Comes with heidenhain POS E touch II DRO. Bridgeport quill power feed, Bridgeport power and knee power feed, 6 vise, overall size, 77x74x94 tall. The plastic case piece that wraps around the back side is cracked pretty good, more than in the pics bc when it was moved back to my property it became more cracked from strapping the machine down. I’ll assist as far as I can. Fork lift required on your end for unloading. Forklift on site I’m able to load onto a trailer. I don’t have a loading dock though. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “mrandmrspickers” and is located in this country: US. This item can be shipped to United States.

• Brand: Bridgeport
• Machine Type: Milling Machine
• Voltage: 460 V
• Model: SERIES II

BRIDGEPORT SERIES II MILL MACHINE 460v 3 phase quill power feed. These last forever and rarely need maintenance. This is a 460v 3 phase machine. Functioning machine that came from a machine shop that closed due to retirement. Comes with heidenhain POS E touch II DRO. Bridgeport quill power feed, Bridgeport power and knee power feed, 6 vise, overall size, 77x74x94 tall. The plastic case piece that wraps around the back side is cracked pretty good, more than in the pics bc when it was moved back to my property it became more cracked from strapping the machine down. I’ll assist as far as I can. Fork lift required on your end for unloading. Forklift on site I’m able to load onto a trailer. I don’t have a loading dock though. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “mrandmrspickers” and is located in this country: US. This item can be shipped to United States.

• Brand: Bridgeport
• Machine Type: Milling Machine
• Voltage: 460 V
• Model: SERIES II

This is my very reliable Webb model number S 2 vertical knee milling machine. This machine is a copy of a Bridgeport Mill, It has been gently used, as you can see by how clean the table is. It was mainly used to manufacture precision motion picture camera parts. This machine was made in the She Hong Industrial factory in Taiwan some time in the 1970′s. It has a 2 HP, 220 volt AC, 3 phase motor, with an R – 8 spindle, powered quill feed, one shot oil, step drive with a max RPM listed at 2720 RPM, the table measures 42″ long x 9″ wide, the knee measures 20″ long, it features a 6″ angle lock style Mill Vice (not shown) Lyman power table feed, and a Sargon DRO. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “cineeng” and is located in this country: US. This item can be shipped to United States.

• Model: Webb S 2
• Spindle Horsepower: 2 hp
• Country/Region of Manufacture: Taiwan
• Custom Bundle: Yes
• Machine Type: Milling Machine
• Table Length: 42\
• Max Spindle Speed (RPM): 2720
• Model Year: 1977
• Power Source: Electric
• Spindle Taper: R- 8
• Function: Milling
• Brand: Webb
• Table Width: 9\
• Bundle Description: 6\
• Control: power table feed, Manual
• Voltage: 220 V