feed Subscribe to feed
pic
6. 07
2020

2004 Haas VF-2SS CNC Machining Center 4th Axis Ready Rigid Tapping 12,000 RPM

Written by: admin - Posted in: Uncategorized - Tags: , , , , , , ,
2004 Haas VF-2SS CNC Machining Center 4th Axis Ready Rigid Tapping 12,000 RPM


2004 Haas VF-2SS CNC Machining Center 4th Axis Ready Rigid Tapping 12,000 RPM


2004 Haas VF-2SS CNC Machining Center 4th Axis Ready Rigid Tapping 12,000 RPM


2004 Haas VF-2SS CNC Machining Center 4th Axis Ready Rigid Tapping 12,000 RPM


2004 Haas VF-2SS CNC Machining Center 4th Axis Ready Rigid Tapping 12,000 RPM


2004 Haas VF-2SS CNC Machining Center 4th Axis Ready Rigid Tapping 12,000 RPM


2004 Haas VF-2SS CNC Machining Center 4th Axis Ready Rigid Tapping 12,000 RPM


2004 Haas VF-2SS CNC Machining Center 4th Axis Ready Rigid Tapping 12,000 RPM


2004 Haas VF-2SS CNC Machining Center 4th Axis Ready Rigid Tapping 12,000 RPM


2004 Haas VF-2SS CNC Machining Center 4th Axis Ready Rigid Tapping 12,000 RPM


2004 Haas VF-2SS CNC Machining Center 4th Axis Ready Rigid Tapping 12,000 RPM


2004 Haas VF-2SS CNC Machining Center 4th Axis Ready Rigid Tapping 12,000 RPM


2004 Haas VF-2SS CNC Vertical Machining Center. Rapid Traverse Rates: 1400 Inch Per Minute Cutting. Feed Rates: 833 Inch Per Minute. Spindle Nose to Table Min. Number of Std T-Slots: 5. Max Weight on Table: 1500 lbs. Spindle: Taper Size: CAT 40. Speed Range: 0 – 12000 RPM. Spindle: Inline Direct Drive. Spindle Power: 30 HP Vector Dual Drive. Capacity: 24 + 1 Max. Tool Weight: 12 lbs. Max Tool Dia: 5. Max Tool Length: 11. Tool Changing Time: 1.6 Seconds. Air Required: 100 psi, 4 scfm. Power: 240v / 66FLA / 3-Phase. Overall Dimensions: 90″ x 982 x 100″ High. Weight: 8,500 lbs. Please visit us at. SPECIFICATIONS SUBJECT TO VERIFICATION. We take wire transfers, cashiers checks, personal or business checks. Personal or business Checks will take 3 to 5 days to clear. Transit times may vary according to shipper. ENVIANOS UN CORREO PARA COTISACION O SI ESTAS BUSCANDO ALGUNA MAQUINA. The item “2004 Haas VF-2SS CNC Machining Center 4th Axis Ready Rigid Tapping 12,000 RPM” is in sale since Wednesday, October 30, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “gthmach12″ and is located in Pico Rivera, California. This item can be shipped to United States.

  • Model: VF-2SS
  • Country/Region of Manufacture: United States
  • Machine Type: Machining Center
  • Model Year: 2004
  • Power Source: Electric
  • Spindle Taper: CAT 40
  • Brand: Haas
  • Control: CNC
  • Voltage: 240 V
2. 07
2020

Haas TM-3P 40 x 20 CNC Mill Probe, rigid tapping, HS machining, 4th-axis

Written by: admin - Posted in: Uncategorized - Tags: , , , , , , ,
Haas TM-3P 40 x 20 CNC Mill Probe, rigid tapping, HS machining, 4th-axis


Haas TM-3P 40 x 20 CNC Mill Probe, rigid tapping, HS machining, 4th-axis



Haas TM-3P 40″ x 20″ CNC Mill Probe, rigid tapping, HS machining. The item “Haas TM-3P 40 x 20 CNC Mill Probe, rigid tapping, HS machining, 4th-axis” is in sale since Thursday, April 30, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “mitctobe” and is located in Lowndesboro, Alabama. This item can’t be shipped, the buyer must pick up the item.

  • Brand: Haas
  • Model Year: 2015
  • X-Axis Travel Bed: 36 in – 40 in
  • Model: TM-3P
  • Max Spindle Speed (RPM): 6000
  • Function: boring
  • Table Length: 10 in – 14.9 in
  • Country/Region of Manufacture: United States
  • Table Width: Over 40 in
  • Power Source: Electric
  • Control: CNC
  • Machine Type: Milling Machine
  • Voltage: 440 V
  • Z-Axis Travel Bed: 16 in – 20 in
  • Y-Axis Travel Bed: 16 in – 20 in
  • Spindle Horsepower: 7.5
25. 06
2020

1996 Fadal VMC-3016 904 CNC VMC Rigid Tapping 88HS 30 x 16 x 20 7.5K 21 ATC

Written by: admin - Posted in: Uncategorized - Tags: , , , ,
1996 Fadal VMC-3016 904 CNC VMC Rigid Tapping 88HS 30 x 16 x 20 7.5K 21 ATC


1996 Fadal VMC-3016 904 CNC VMC Rigid Tapping 88HS 30 x 16 x 20 7.5K 21 ATC


1996 Fadal VMC-3016 904 CNC VMC Rigid Tapping 88HS 30 x 16 x 20 7.5K 21 ATC


1996 Fadal VMC-3016 904 CNC VMC Rigid Tapping 88HS 30 x 16 x 20 7.5K 21 ATC


1996 Fadal VMC-3016 904 CNC VMC Rigid Tapping 88HS 30 x 16 x 20 7.5K 21 ATC


1996 Fadal VMC-3016 904 CNC VMC Rigid Tapping 88HS 30 x 16 x 20 7.5K 21 ATC


1996 Fadal VMC-3016 904 CNC VMC Rigid Tapping 88HS 30 x 16 x 20 7.5K 21 ATC


1996 Fadal VMC-3016 904 CNC VMC Rigid Tapping 88HS 30 x 16 x 20 7.5K 21 ATC


1996 Fadal VMC-3016 904 CNC VMC Rigid Tapping 88HS 30 x 16 x 20 7.5K 21 ATC


1996 Fadal VMC-3016 904 CNC VMC Rigid Tapping 88HS 30 x 16 x 20 7.5K 21 ATC


1996 Fadal VMC-3016 904 CNC VMC Rigid Tapping 88HS 30 x 16 x 20 7.5K 21 ATC


1996 Fadal VMC-3016 904 CNC VMC Rigid Tapping 88HS 30 x 16 x 20 7.5K 21 ATC


Here is link to video of this machine not running. See video of this machine here. 1996 Fadal VMC-3016 904 Vertical Machining Center Fadal 88HS 30x16x20 7.5K 21 ATC with Rigid Tapping. We have riggers and. Under Power and Ready for Inspection. EZ Systems Machine Reference Number: ez31665. Machine Location: Irvine, CA 92618. Table W 16 inch. Table L 39 inch. Weight 8,500 lbs. Below explains what to do once you are on that page. The item “1996 Fadal VMC-3016 904 CNC VMC Rigid Tapping 88HS 30 x 16 x 20 7.5K 21 ATC” is in sale since Friday, June 14, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “ezsystems” and is located in Irvine, California. This item can be shipped to North, South, or Latin America.

  • Brand: Fadal
25. 06
2020

Haas Mini Mill VMC, 2004 Rigid Tap, Coolant Pump, Under Power

Written by: admin - Posted in: Uncategorized - Tags: , , , , , ,
Haas Mini Mill VMC, 2004 Rigid Tap, Coolant Pump, Under Power


Haas Mini Mill VMC, 2004 Rigid Tap, Coolant Pump, Under Power


Haas Mini Mill VMC, 2004 Rigid Tap, Coolant Pump, Under Power


Haas Mini Mill VMC, 2004 Rigid Tap, Coolant Pump, Under Power


Haas Mini Mill VMC, 2004 Rigid Tap, Coolant Pump, Under Power


Haas Mini Mill VMC, 2004 Rigid Tap, Coolant Pump, Under Power


Haas Mini Mill VMC, 2004 Rigid Tap, Coolant Pump, Under Power


Haas Mini Mill VMC, 2004 Rigid Tap, Coolant Pump, Under Power


Haas Mini Mill VMC, 2004 Rigid Tap, Coolant Pump, Under Power


Haas Mini Mill VMC, 2004 Rigid Tap, Coolant Pump, Under Power


Haas Mini Mill VMC, 2004 Rigid Tap, Coolant Pump, Under Power


Haas Mini Mill VMC, 2004 Rigid Tap, Coolant Pump, Under Power


Haas Mini Mill VMC, 2004 – Rigid Tap, Coolant Pump, Under Power. We are pleased to offer the following for your consideration. Table Size: 36″ X 12″. Spindle Speeds: 6,000 RPM. Spindle Taper: CAT #40. Tool Capacity: 10 ATC. Motor: 7.5 HP. Max Load on Table: 500 lbs. Spindle Nose to Table: 14 (Max). Spindle Nose to Table: 4 (Min). Weight: 4,000 lbs. All specifications are assumed to be correct but must be confirmed by purchasing entity. Revelation Machinery encourages first-hand inspection of all used machinery. Please verify all of the specs listed for this machine. Listing and template services provided by inkFrog. The item “Haas Mini Mill VMC, 2004 Rigid Tap, Coolant Pump, Under Power” is in sale since Wednesday, February 26, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “revelationmachinery” and is located in Los Angeles, California. This item can be shipped to United States.

  • Brand: Haas
8. 06
2020

1996 Fadal VMC 4020 HT, Rigid Tap, 10,000 RPM Spindle, 15hp Motor, 21 Tool ATC

Written by: admin - Posted in: Uncategorized - Tags: , , , , ,
1996 Fadal VMC 4020 HT, Rigid Tap, 10,000 RPM Spindle, 15hp Motor, 21 Tool ATC


1996 Fadal VMC 4020 HT, Rigid Tap, 10,000 RPM Spindle, 15hp Motor, 21 Tool ATC


1996 Fadal VMC 4020 HT, Rigid Tap, 10,000 RPM Spindle, 15hp Motor, 21 Tool ATC


1996 Fadal VMC 4020 HT, Rigid Tap, 10,000 RPM Spindle, 15hp Motor, 21 Tool ATC


1996 Fadal VMC 4020 HT, Rigid Tap, 10,000 RPM Spindle, 15hp Motor, 21 Tool ATC


1996 Fadal VMC 4020 HT, Rigid Tap, 10,000 RPM Spindle, 15hp Motor, 21 Tool ATC


1996 Fadal VMC 4020 HT, Rigid Tap, 10,000 RPM Spindle, 15hp Motor, 21 Tool ATC


1996 Fadal VMC 4020 HT, Rigid Tap, 10,000 RPM Spindle, 15hp Motor, 21 Tool ATC


1996 Fadal VMC 4020 HT. 10,000 RPM Spindle. We have three of them and need to open space up on shop floor. The item “1996 Fadal VMC 4020 HT, Rigid Tap, 10,000 RPM Spindle, 15hp Motor, 21 Tool ATC” is in sale since Wednesday, January 8, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “kedan_6061″ and is located in Port Huron, Michigan. This item can’t be shipped, the buyer must pick up the item.

  • Brand: Fadal
  • Model Year: 1996
  • Machine Type: Vertical Milling Machine
  • Function: Milling
  • Spindle Taper: CAT 40
  • Power Source: Electric
  • Spindle Horsepower: 15 hp
  • Control: CNC
23. 05
2020

Haas TM-3P 40 x 20 CNC Mill Probe, rigid tapping, HS machining, 4th-axis ready

Written by: admin - Posted in: Uncategorized - Tags: , , , , , , , ,
Haas TM-3P 40 x 20 CNC Mill Probe, rigid tapping, HS machining, 4th-axis ready


Haas TM-3P 40 x 20 CNC Mill Probe, rigid tapping, HS machining, 4th-axis ready


Haas TM-3P 40 x 20 CNC Mill Probe, rigid tapping, HS machining, 4th-axis ready


Haas TM-3P 40 x 20 CNC Mill Probe, rigid tapping, HS machining, 4th-axis ready


Haas TM-3P 40 x 20 CNC Mill Probe, rigid tapping, HS machining, 4th-axis ready


Haas TM-3P 40 x 20 CNC Mill Probe, rigid tapping, HS machining, 4th-axis ready


Haas TM-3P 40 x 20 CNC Mill Probe, rigid tapping, HS machining, 4th-axis ready


Haas TM-3P 40 x 20 CNC Mill Probe, rigid tapping, HS machining, 4th-axis ready


Haas TM-3P 40 x 20 CNC Mill Probe, rigid tapping, HS machining, 4th-axis ready


Haas TM-3P 40 x 20 CNC Mill Probe, rigid tapping, HS machining, 4th-axis ready


Machining custom XRD sample holders – YouTube. It got light use and was eventually leased to another machine shop briefly before making its way to me. It’s been installed in my home garage for the last 4 years and runs beautifully even on single phase power. It’s gotten fewer hours in the last four years than most Haas mills get in their first month on the floor so you can expect many years of operation. 40″ x 20″ 16 Z travels. 57 x 14.5 table. 6000 RPM spindle 7.5 hp. 10-position automatic tool changer. The machine has many of the most popular Haas options. Renishaw tool and spindle probe. Measures the length AND diameter of tools very precisely and completely automatically! The spindle probe is usually used for picking up work offsets, but can do so much more. Need a bore machined precisely withing 0.0005? The probe can measure it after machining and adjust the offsets for the tool before final boring! Watch some videos on this thing. It’s also completely wireless. Upgraded high-flow coolant system with 0.75 hp pump motor I have the original coolant system too. It’s never been used as it’s way too small. Chip auger I thought this was excessive until the first time I ran more than a few parts. It’s a life saver! Rigid tapping I use roll form taps almost exclusively and haven’t broken one yet. It will also peck tap if you have only a traditional tap. High-speed machining The machine didn’t have this when I first got it, but after I got into better CAM software, the benefits were obvious. I don’t even consider this optional anymore. The battery backup has been replaced with the Haas, dual-battery holder so you should never have to worry about losing memory again. Visual Quick Code programming interface (I only like it for the probing cycles it offers). Spindle orientation I’ve never used this myself, but coupled with a right-angle head, driven or air powered, you’ve got an extra positioning axis for 3+1 or 3+2 if you add a rotary. Coordinate rotation and scaling (cool way to adjust the movements to match the orientation of the part if you’ve got something hard to orient precisely like a plate with two holes in it). I added a Redbone Tool coolant ring. This thing is awesome. I had been twiddling with coolant lockline during machining constantly. I installed this about 6 months after I bought the mill and haven’t touched a coolant nozzle since then. THE HRT 160 ROTARY IS OPTIONAL. It is available separately. Vises, fixtures, chucks, tooling, and hand tools are not included. The hand tool rack is included. Listed for sale locally and offered subject to prior sale. The item “Haas TM-3P 40 x 20 CNC Mill Probe, rigid tapping, HS machining, 4th-axis ready” is in sale since Sunday, April 26, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “ks-analytical” and is located in Aubrey, Texas. This item can’t be shipped, the buyer must pick up the item.

  • Model: TM-3P
  • Country/Region of Manufacture: United States
  • Spindle Horsepower: 7.5
  • Machine Type: Milling Machine
  • Table Length: 10 in – 14.9 in
  • Max Spindle Speed (RPM): 6000
  • Model Year: 2012
  • Power Source: Electric
  • X-Axis Travel Bed: 36 in – 40 in
  • Y-Axis Travel Bed: 16 in – 20 in
  • Z-Axis Travel Bed: 16 in – 20 in
  • Function: boring
  • Brand: Haas
  • Table Width: Over 40 in
  • Control: CNC
  • Voltage: 230 single phase
8. 05
2020

Used Haas VF-2 Vertical Mill Machining Center 30×16 VMC Gear Box P-Cool Rigid 98

Written by: admin - Posted in: Uncategorized - Tags: , , , , , , , , , ,
Used Haas VF-2 Vertical Mill Machining Center 30x16 VMC Gear Box P-Cool Rigid 98


Used Haas VF-2 Vertical Mill Machining Center 30x16 VMC Gear Box P-Cool Rigid 98


Used Haas VF-2 Vertical Mill Machining Center 30x16 VMC Gear Box P-Cool Rigid 98


Used Haas VF-2 Vertical Mill Machining Center 30x16 VMC Gear Box P-Cool Rigid 98


Used Haas VF-2 Vertical Mill Machining Center 30x16 VMC Gear Box P-Cool Rigid 98


Used Haas VF-2 Vertical Mill Machining Center 30x16 VMC Gear Box P-Cool Rigid 98



Located in Asheville NC. The item “Used Haas VF-2 Vertical Mill Machining Center 30×16 VMC Gear Box P-Cool Rigid 98″ is in sale since Wednesday, February 19, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “walter3247″ and is located in Asheville, North Carolina. This item can’t be shipped, the buyer must pick up the item.

  • Model: VF-2
  • Modified Item: No
  • Country/Region of Manufacture: United States
  • Spindle Horsepower: 15
  • Machine Type: Milling Machine
  • Custom Bundle: No
  • Model Year: 1997
  • Power Source: Electric
  • Type: CNC, Vertical
  • Highest Spindle Speed (RPM): 5001 – 7500
  • Non-Domestic Product: No
  • Make: Haas
  • X-Axis Travel Bed: 26” – 30”
  • Y-Axis Travel Bed: 16” – 20”
  • Z-Axis Travel Bed: 16” – 20”
  • Function: Milling
  • Brand: Haas
1. 05
2020

Haas Mini Mill VMC, 2004 Rigid Tap, Coolant Pump, 1 MB, Video

Written by: admin - Posted in: Uncategorized - Tags: , , , , , ,
Haas Mini Mill VMC, 2004 Rigid Tap, Coolant Pump, 1 MB, Video


Haas Mini Mill VMC, 2004 Rigid Tap, Coolant Pump, 1 MB, Video


Haas Mini Mill VMC, 2004 Rigid Tap, Coolant Pump, 1 MB, Video


Haas Mini Mill VMC, 2004 Rigid Tap, Coolant Pump, 1 MB, Video


Haas Mini Mill VMC, 2004 Rigid Tap, Coolant Pump, 1 MB, Video


Haas Mini Mill VMC, 2004 Rigid Tap, Coolant Pump, 1 MB, Video


Haas Mini Mill VMC, 2004 Rigid Tap, Coolant Pump, 1 MB, Video


Haas Mini Mill VMC, 2004 Rigid Tap, Coolant Pump, 1 MB, Video


Haas Mini Mill VMC, 2004 Rigid Tap, Coolant Pump, 1 MB, Video


Haas Mini Mill VMC, 2004 Rigid Tap, Coolant Pump, 1 MB, Video


Haas Mini Mill VMC, 2004 Rigid Tap, Coolant Pump, 1 MB, Video


Haas Mini Mill VMC, 2004 Rigid Tap, Coolant Pump, 1 MB, Video


Haas Mini Mill VMC, 2004 – Rigid Tap, Coolant Pump, 1 MB, Video. We are pleased to offer the following for your consideration. Table Size: 36″ X 12″. Spindle Speeds: 6,000 RPM. Spindle Taper: CAT #40. Tool Capacity: 10 ATC. Motor: 7.5 HP. Max Load on Table: 500 lbs. Spindle Nose to Table: 14 (Max). Spindle Nose to Table: 4 (Min). Weight: 4,000 lbs. Vector/brushless single or 3-phase. Revelation Machinery encourages first-hand inspection of all used machinery. Please verify all of the specs listed for this machine. Listing and template services provided by inkFrog. The item “Haas Mini Mill VMC, 2004 Rigid Tap, Coolant Pump, 1 MB, Video” is in sale since Wednesday, February 26, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “revelationmachinery” and is located in Los Angeles, California. This item can be shipped to United States.

  • Brand: Haas
27. 04
2020

Haas Mini Mill VMC, 2005 Rigid Tap, Coolant Pump Kit, 6k RPM Vector/brushless

Written by: admin - Posted in: Uncategorized - Tags: , , , , , ,
Haas Mini Mill VMC, 2005 Rigid Tap, Coolant Pump Kit, 6k RPM Vector/brushless


Haas Mini Mill VMC, 2005 Rigid Tap, Coolant Pump Kit, 6k RPM Vector/brushless


Haas Mini Mill VMC, 2005 Rigid Tap, Coolant Pump Kit, 6k RPM Vector/brushless


Haas Mini Mill VMC, 2005 Rigid Tap, Coolant Pump Kit, 6k RPM Vector/brushless


Haas Mini Mill VMC, 2005 Rigid Tap, Coolant Pump Kit, 6k RPM Vector/brushless


Haas Mini Mill VMC, 2005 Rigid Tap, Coolant Pump Kit, 6k RPM Vector/brushless


Haas Mini Mill VMC, 2005 Rigid Tap, Coolant Pump Kit, 6k RPM Vector/brushless


Haas Mini Mill VMC, 2005 Rigid Tap, Coolant Pump Kit, 6k RPM Vector/brushless


Haas Mini Mill VMC, 2005 Rigid Tap, Coolant Pump Kit, 6k RPM Vector/brushless


Haas Mini Mill VMC, 2005 Rigid Tap, Coolant Pump Kit, 6k RPM Vector/brushless


Haas Mini Mill VMC, 2005 Rigid Tap, Coolant Pump Kit, 6k RPM Vector/brushless


Haas Mini Mill VMC, 2005 Rigid Tap, Coolant Pump Kit, 6k RPM Vector/brushless


Haas Mini Mill VMC, 2005 – Rigid Tap, Coolant Pump Kit, 6k RPM Vector/brushless. We are pleased to offer the following for your consideration. Table Size: 36″ X 12″. Spindle Speeds: 6,000 RPM. Spindle Taper: CAT #40. Tool Capacity: 10 ATC. Motor: 7.5 HP. Max Load on Table: 500 lbs. Spindle Nose to Table: 14 (Max). Spindle Nose to Table: 4 (Min). Weight: 4,000 lbs. Vector/brushless single or 3-phase. Revelation Machinery encourages first-hand inspection of all used machinery. Please verify all of the specs listed for this machine. Listing and template services provided by inkFrog. The item “Haas Mini Mill VMC, 2005 Rigid Tap, Coolant Pump Kit, 6k RPM Vector/brushless” is in sale since Wednesday, February 26, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “revelationmachinery” and is located in Los Angeles, California. This item can be shipped to United States.

  • Brand: Haas
28. 01
2020

HAAS VF1 VF-1 VF-1D 4TH Axis Wiring, 20HP, 7500 RPM, RIGID TAPPING

Written by: admin - Posted in: Uncategorized - Tags: , , , , , , ,
HAAS VF1 VF-1 VF-1D 4TH Axis Wiring, 20HP, 7500 RPM, RIGID TAPPING


HAAS VF1 VF-1 VF-1D 4TH Axis Wiring, 20HP, 7500 RPM, RIGID TAPPING


HAAS VF1 VF-1 VF-1D 4TH Axis Wiring, 20HP, 7500 RPM, RIGID TAPPING


HAAS VF1 VF-1 VF-1D 4TH Axis Wiring, 20HP, 7500 RPM, RIGID TAPPING


HAAS VF1 VF-1 VF-1D 4TH Axis Wiring, 20HP, 7500 RPM, RIGID TAPPING


HAAS VF1 VF-1 VF-1D 4TH Axis Wiring, 20HP, 7500 RPM, RIGID TAPPING


HAAS VF-1D, 4TH Axis Wiring, 20HP, 7500 RPM, 21 TOOLS, RIGID TAPPING , 9993 LOW HOURS. Under Power, Call for inspection 713-748-987O. CNC Tools LLC is a company dedicated to the sale and repair of components such as; Power Supplies, Electronic Cards, Servo Drives, Spindle Drives, Motors, and many other products for robots and CNC machines. Our extensive inventory of items, helps keep you up and running, we are committed to meeting our customers needs immediately. Will also gladly answer any questions or concerns you may have. CNC TOOLS must be contacted within 7 days of received item if planning to make a return. CNC TOOLS stocks CNC electrical equipment for your metal working or fabricating machinery. Brands include FANUC, MITSUBISHI, ALLEN BRADLEY, as well as others. If we don’t have it in stock we can find it for you. If you need assistance, we can help. CNC TOOLS is not liable for any personal injury or property damage resulting from the use of this equipment. The item “HAAS VF1 VF-1 VF-1D 4TH Axis Wiring, 20HP, 7500 RPM, RIGID TAPPING” is in sale since Tuesday, October 22, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “cnctoolsllc” and is located in Pharr, Texas. This item can’t be shipped, the buyer must pick up the item.

Search this blog

Tag cloud