Sherline 5400 CNC Milling Machine / Sherline 8 CNC Lathe Workshop. Up for sale is a Sherline 5400 CNC Milling machine & Sherline 8 CNC Lathe. Both machines are fully functional. They run on GRBL-Arduino ecosystem. Included are the raspberry pi systems to run each machine respectively. Included are also the black husky cabinets. Backlash on each machine is 0.001. Both machines have a cap spindle speed of 10,000 RPMS. Theyve been upgraded to the new pulley system. On the mill, theres also a retrofitted chip blower. The machines are in incredible condition. I was extremely gentle with them. Ive replaced all leadscrews, nuts, and anti backlash systems. They should last a long time before needing replacement parts. Sad to see them go but upgraded machines. Theyve work extremely well for me for the past 5 years in product development. If you have any questions, feel free to ask. Reasonable offers are also welcome. The item “Sherline 5400 CNC Milling Machine / Sherline 8 CNC Lathe Workshop” is in sale since Sunday, September 5, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “jussalga” and is located in Chicago, Illinois. This item can’t be shipped, the buyer must pick up the item.

• Brand: Sherline
• Control: CNC
• Machine Type: Milling Machine
• Model: Sherline 5400 CNC

Sherline 4000 Lathe and milling machine. 3.50 (90 mm). 1.75 (44.5 mm). 8.00 (200 mm). Spindle runout of Morse taper. 4.25 (110 mm). 0° to 45° by 5°. Electronically controlled spindle speed range. 70 to 2800 RPM. 10.25 (260 mm). 5 to 15 amps depending on load. The item “Sherline 4000 Lathe and milling machine” is in sale since Monday, August 23, 2021. This item is in the category “Business, Office & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Metalworking Lathes”. The seller is “saffi786″ and is located in London. This item can be shipped to United Kingdom, Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, United States, Bahrain, Canada, Japan, New Zealand, China, Israel, Hong Kong, Norway, Indonesia, Malaysia, Mexico, Singapore, South Korea, Switzerland, Taiwan, Thailand, Bangladesh, Bermuda, Bolivia, Barbados, Brunei darussalam, Cayman islands, Egypt, Guernsey, Gibraltar, Guadeloupe, French guiana, Iceland, Jersey, Jordan, Cambodia, Liechtenstein, Sri lanka, Macao, Monaco, Maldives, Martinique, Nicaragua, Oman, Paraguay, Reunion, Saudi arabia, South africa, United arab emirates, Ukraine, Chile, Bahamas, Colombia, Costa rica, Guatemala, Honduras, Jamaica, Kuwait, Panama, Philippines, Qatar, Trinidad and tobago, Uruguay.

• Brand: Sherline

D&M4s / Sherline CNC Mill w/ Enclosure. Condition is “Used” from working environment. Perfect unit for DIY CNC and retrofits. D&M sells educational machining centers for students. The unit consists of a sherline mini mill with a D&M enclosure. Nema 23 vexta stepper motors. Enclosure contains stepper motor drivers, spindle motor driver, and ac/dc transformer. No controller included (perfect retrofit project, there are several good DIY control boards to use). Magnetic proximity switches on mill axes and enclosure doors. Ways/frame are aluminum, and z axis dovetail is cast iron. Anti-backlash nuts on x/y axes. Spline coupler between motors and drive screws (see video below). Dents/scratches on machine bed, but could be fixed by facing off the bed with a fly cutter. Weight of enclosure+mill: 112 lbs. 27 deep (including e-stop and fuse holder protrusion). 26 deep (excluding fuses/estop). 21.75 tall (bottom of enclosure to top of z axis motor). The item “D&M4s / Sherline CNC Mill with Enclosure. 90VDC spindle, Can Ship/deliver” is in sale since Thursday, June 10, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “savannahlakes” and is located in Iva, South Carolina. This item can’t be shipped, the buyer must pick up the item.

• Brand: Sherline
• Function: Milling
• X-Axis Travel Bed: 8.65″
• Control: CNC
• Machine Type: Machining Center
• Power Source: Electric
• Table Length: 13″
• Y-Axis Travel Bed: 3″
• Model: D&M 4s
• Spindle Taper: morse 1
• Z-Axis Travel Bed: 6.25″

Sherline series 5400 milling machine. The item “Sherline Milling Machine Series 5400″ is in sale since Thursday, August 5, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “gt-rolex” and is located in Pittsburgh, Pennsylvania. This item can be shipped worldwide.

• Model: 5400
• Country/Region of Manufacture: United States
• Machine Type: Milling Machine
• Power Source: Electric
• Function: Milling
• Brand: Sherline
• Control: Manual
• Voltage: 110 V

Sherline Cnc Mill Mach 4. The item “Sherline Cnc Mill Mach 4″ is in sale since Monday, March 1, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “brent7634″ and is located in Spring Park, Minnesota. This item can be shipped to United States.

• Brand: Sherline
• Max Spindle Speed (RPM): 7501 – 10000
• Voltage: 110 V
• Function: Milling
• Control: CNC

Perfect unit for DIY CNC and retrofits. D&M sells educational machining centers for students. The unit consists of a sherline mini mill with a D&M enclosure. Nema 23 vexta stepper motors. Enclosure contains stepper motor drivers, spindle motor driver, and ac/dc transformer. No controller included (perfect retrofit project, there are several good DIY control boards to use). Magnetic proximity switches on mill axes and enclosure doors. Ways/frame are aluminum, and z axis dovetail is cast iron. Anti-backlash nuts on x/y axes. Spline coupler between motors and drive screws (see video below). Dents/scratches on machine bed, but could be fixed by facing off the bed with a fly cutter. Weight of enclosure+mill: 112 lbs. 27 deep (including e-stop and fuse holder protrusion). 26 deep (excluding fuses/estop). 21.75 tall (bottom of enclosure to top of z axis motor). My research has shown me that this machine is extremely similar (if not identical) to the sherline 5000 mini mill. I can’t guarantee this, but what I have seen leads me to believe it is true. See the video below for a breakdown of this particular machine. Unit comes with a metal cover for the belts/spindle motor but I have misplaced the necessary coupling piece to allow its attachment. The unit can operate without it. I will include it in case you want to fabricate your own method of attaching it. I will include as many screws as possible. To see the specs on the sherline 5000 mill, visit this site. WATCH THIS VIDEO I MADE FOR BREAKDOWN OF THIS UNIT. Here are two videos showing very similar machines cutting aluminum. The item “D&M4s / Sherline CNC Mill with Enclosure. #1 morse taper. 90VDC spindle SEE VIDEO” is in sale since Friday, September 4, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “houseatsheridan” and is located in Nelsonville, Ohio. This item can be shipped to United States.

• Brand: Sherline
• Function: Milling
• Control: CNC
• Machine Type: Machining Center
• X-Axis Travel Bed: 8.65″
• Table Length: 13″
• Z-Axis Travel Bed: 6.25″
• Y-Axis Travel Bed: 3″
• Spindle Taper: morse 1
• Power Source: Electric

PAXTON/PATTERSON CNC Mill TRAINING CENTER. Similar mill is also made by Sherline, appears to be a 10in base model. Have powered the unit up and was able to run the spindle in manual setting. I did not test the unit further. The unit is in good cosmetic condition with normal wear marks. Its max travel volume is 8in. X 4in x 6in, and uses ER16 collets for tool holding. I’ll also include a vise for work holding. 36 x 36 x 30 Pallet. The item “PAXTON/PATTERSON (SHERLINE Style) CNC MILL TRAINING CENTER with Controller” is in sale since Saturday, August 22, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “lyonste” and is located in Rio Medina, Texas. This item can be shipped to United States.

• Brand: PAXTON/PATTERSON
• Function: Milling
• Control: CNC
• Model Year: Unknown
• Custom Bundle: No
• Non-Domestic Product: No
• Model: CNC TRAINING CENTER
• Modified Item: No
• Machine Type: CNC Mill
• MPN: CNC TRAINING CENTER

This unit appears to be in good condition. Motor and all adjustments seem to work. I know nothing about these mills, this is an estate sale acquisition. The item “SHERLINE #5400 MILL” is in sale since Thursday, September 17, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “elr511″ and is located in Modesto, California. This item can be shipped to United States.

• Model: 5400
• Machine Type: Milling Machine
• Table Length: 10 in – 14.9 in
• Model Year: 5400
• Power Source: Electric
• MPN: 5400
• Function: Drilling
• Brand: SHERLINE
• Control: Manual

Here’s a Sherline cnc mill with an enclosure, a laptop with Mach3 for controlling it, and a 4th axis kit. It works well for cutting wood, plastic, and aluminum. Its max travel volume is 8in. X 4in x 6in, and uses ER16 collets for tool holding. I’ll also include a vise for work holding. If you are nearby, contact me if you would like to take a look at the machine and see it run. The item “Sherline CNC mill with enclosure and controller + 4th axis” is in sale since Thursday, July 9, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “zillo7*” and is located in Raritan, New Jersey. This item can be shipped to United States.

• Non-Domestic Product: No
• Modified Item: No
• Country/Region of Manufacture: United States
• Custom Bundle: No
• Brand: Sherline
• Control: CNC

Sherline 5400 8-Direction mill milling machine. I bought the machine with some other tools together. I dont really know much about it. Item is in very good condition. Speed changes when turning the speed knob. Everything slides or rotates as it should. Come with a wrench. The item “Sherline 5400 8-Direction mill milling machine” is in sale since Thursday, June 25, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “bcjm” and is located in Reston, Virginia. This item can be shipped to United States.

• Brand: Sherline
• Model Year: Unknown
• Machine Type: Milling Machine
• Model: 2000
• Function: Milling
• Country/Region of Manufacture: United States
• MPN: Sherline’s 2000 MILL