This Listing is for a. 6 Speed Geared Head, with all Hardened and Ground Steel Gears for. This machine uses 120V Standard Power! Here are some features of this milling machine. Hardended and Ground Steel Gears in head for much heavier cutting capacity compared with plastic gear equipped models. Compact size for smaller workshops, but has more power to remove material when needed. 001 on X and Y with a true inch pitch. Main column is attached to the base with 4 bolts from the top, with a very wide mounting surface for much more rigidity over other models in this size range. Only requires 120 volt single phase circuit so it can be set up virtually anywhere, without needing additional circuits installed in your workshop. Compact, Accurate, Economical Machine. Great for those who are looking for a. Compact machine for a smaller work shop, yet need the ability to take heavier cuts. Other machines in this size range. Spindle is Supported by High Precision Tapered Roller Bearing. Mill Head May be Tilted ±90° (both left and right). Precision Manual Fine Down Feed. For Table, Head, Quill. Easy Reading Dials Have Satin Chrome Finish. Quill DRO is Standard. Accuracy of the Display 0.0005, Selectable from. Generous 18-1/4 Spindle To Table Max Distance for taller work. 8-1/2 Y Axis Travel, More than other machines in this class. Average time delivered is 2-7 days depending on how far from Pittsburgh you are, it could be a little longer in remote places but normally is very fast. DON’T FORGET TO CHECK OUT OUR ACCESSORIES THAT WE HAVE FOR THIS MACHINE INCLUDING R-8 COLLET SETS, 4 VISES, AND CLAMP KITS! Quality Machine Tools, 701 Parkway View Drive, Pittsburgh, PA 15205. We are machinists here too, so we know what we sell. This is really a top quality machine, and will last a long, long time. AND we are here for support too. We sell these machines regularly, we know them inside and out, and have been in business for many years, so if there is any question, we can help. Table Size 27-1/2 x 7-1/. Max Distance Spindle To Table 18-1/4. Range of Spindle Speeds. Headstock Tilt Left & Right ±90°. Net Weight (Not Including Base). Net Weight (With Base). Power Requirements 120V, 10 Amps. Dimensions (Assembled) 39″W x 78″H x 30D. NO extra charge for residential or anything on these, as long as a truck can get to you, its covered. Check out our other auctions for more lathes and mills. The item “PM-727-M VERTICAL BENCH TOP MILLING MACHINE, 3 YEAR WARRANTY FREE SHIPPING” is in sale since Wednesday, January 25, 2017. This item is in the category “Business & Industrial\Heavy Equipment\Milling Machines”. The seller is “qualitymachinetools” and is located in Pittsburgh, Pennsylvania. This item can be shipped to United States, to Canada.

• Make: Precision Matthews
• Model: PM-727-M with stand
• Type: Manual, Vertical
• Model Year: 2015
• Highest Spindle Speed (RPM): 1501 – 2000
• Spindle Horsepower: 1

This Listing is for a. Features a DC Brushless Variable Speed Motor. And is BELT DRIVE for smooth and quiet operation! This machine uses 120V Standard Power! Here are some features of this milling machine. R8 Spindle Taper Standard, so it uses the most commonly available tooling. DC BRUSHLESS Variable Speed Motor, Powerful, Smooth and Reliable. Belt Drive from Motor to Spindle runs MUCH quieter than others, and eliminates any failure prone plastic gears. Main Colum is attached to the base with 4 bolts from the top, with a wide mounting surface for much more rigidity over other models in this size range. 3 Bolt Head Mount is now standard, for more rigidity when milling. 001 Readings on X and Y axis dials, with 10 threads per inch Leadscrews make it easier to cut accurately. Average time delivered is 2-7 days depending on how far from Pittsburgh you are, it could be a little longer in remote places but normally is very fast. DON’T FORGET TO CHECK OUT OUR ACCESSORIES THAT WE HAVE FOR THIS MACHINE INCLUDING R-8 COLLET SETS, 4 VISES, AND CLAMP KITS! Quality Machine Tools, 701 Parkway View Drive, Pittsburgh, PA 15205. We are machinists here too, so we know what we sell. This is really a top quality machine, and will last a long, long time. AND we are here for support too. We sell these machines regularly, we know them inside and out, and have been in business for many years, so if there is any question, we can help. Table Size 7-1/8″ x 27-1/2″. X Axis Travel 19. Y Axis Travel 7. Z Axis Travel (Head) 13. Max Drilling Capacity. Spindle Taper R8. Max Face Milling Capacity. 1/2″ (use 12mm or 7/16″ T Nut Clamping Kits to fit). Range of Spindle Speeds. Main Motor Horsepower – 1 HP. Voltage / Phase / Amps – 120 Volts, SINGLE Phase, 10 Amps. Approximate Machine Weight – 300 LBS. NO extra charge for residential or anything on these, as long as a truck can get to you, its covered. Check out our other auctions for more lathes and mills. The item “PM-25-MV VERTICAL BENCH TOP MILLING MACHINE, 3 YEAR WARRANTY FREE SHIPPING” is in sale since Friday, January 27, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “qualitymachinetools” and is located in Pittsburgh, Pennsylvania. This item can be shipped to United States, to Canada.

• Brand: Precision Matthews
• MPN: PM-25MV
• Country//Region of Manufacture: China

This Listing is for a. This is a very high precision milling machine. There are no shortcuts taken with these machines, they are absolutely top of the line! Here are some features of this milling machine. High Grade Meehanite Castings, High Grade of Cast Iron, Meehanite / Grade 250 (FC250/HT250). Cast Iron, ribbed for rigidity and strength. Be sure to ask if comparing with others. This one is 1 phase, 220 Volts, If you need Single phase. Entire Milling Head and Main Motor are made in Taiwan – only very high quality units used on. Hardened and Ground table and way surfaces greatly reduces wear, which maintains accuracy, and greatly extends machine life. Box Ways on Y axis means more surface area, and more rigidity. Massive 20 Wide Saddle, for extra table support. Turcite B way material on X and Y Axis for smoother table movements and longer machine life. Compare with others, you will notice the feel right away in the table handles. Head Swivels Left and Right, AND Tilts Front To Back. One Shot Lubrication system is standard equipment, which also extends machine life, and reduces. Oiling times of all way surfaces and lead screws to seconds, it is accomplished by simply pumping. High precision Inch Pitch lead screws, for ease of use and greater accuracy (5TPI Screws). High Precision Spindle with +/. 0002 or less runout for greater tool life and accuracy. Balanced pulleys in head for smooth and quiet operation. Full featured head with automatic quill feeds in 3 steps for boring operations. Precision Honed Quill Bore for tighter tolerance fit, which leads to improved accuracy when. Drilling and precision boring. Power Down Feed on quill is standard, in 3 steps. 006 Inches per revolution. Quill is Precision Ground, then Hard Chrome Plated for even longer life. Available with either step pulley speed changes, or variable speeds to suit the user’s preferences. Built in coolant sump in machine base. Tolerance Test Certificate included, each machine is checked for accuracy through a careful. Quality machine that exceeds their expectations. Normal wear items such as belts, bushings, etc. Table Size 9x 50. X Axis Travel 30 with power Feed Installed, with Full Way Support (Not over-traveled past ends of ways). Y Axis Travel 12. Z Axis Travel (Knee) 18. Distance, Spindle to Table 18. Leadscrew Type Precision Ground ACME Leadscrew W/ Double Nut Backlash. Adjustments on X and Y Axis. 200 (5 Threads Per Inch). Spindle Speed Range 70- 4200 RPM (variable). Speed Change Type Variable Speed/ Hi-Low Lever. Spindle Bearing Type High Precision Tapered Roller Bearings, Fully Adjustable. Spindle Bearing Class C7. Overall Height, Head Up 87. Height with head down For moving. Depth Front to back, rear of machine to front of knee casting 46. Rear of machine to tip of Y axis handle 51. Width X Axis Table Handles, Tip to Tip 68. Machine Weight 2550 LBS. Voltage / Phase 220 Volt 1 Phase, 20 Amp Circuit. Average time delivered is 2-10 days depending on how far from Pittsburgh you are, it could be a little longer in remote places but normally is very fast. If you would like to stop in and see one in person, we are at. Quality Machine Tools, 701 Parkway View Drive, Pittsburgh, PA 15205. We are machinists here too, so we know what we sell. This is really a top quality machine, and will last a long, long time. AND we are here for support too. We sell these machines regularly, we know them inside and out, and have been in business for many years, so if there is any question, we can help. NO extra charge for residential or anything on these, as long as a truck can get to you, its covered. THIS MACHINE IS NOT ABLE TO BE DELIVERED WITH A LIFT GATE. Check out our other auctions for more lathes and mills. The item “PM-950V VERTICAL KNEE MILL MILLING MACHINE 3 AX DRO, X PWR, 1PH FREE SHIPPING” is in sale since Wednesday, January 25, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “qualitymachinetools” and is located in Pittsburgh, Pennsylvania. This item can be shipped to United States.

• Brand: Precision Matthews
• MPN: PM-950V
• Model: PM-950V-1PH

Bolton Tools has been in the market for over 4 years. The customer response has been tremendous! People are very happy with our machine quality and price point. We offer some of the best prices in the country, we guarantee it! We are committed to our products and our customers. We would love for you to give us a call to discuss any of your machine needs. Drilling capacity 1 1/4. Face milling capacity 2 1/2. End milling capacity 13/16. Swivel angle of head-stock at perpendicular direction ±90°. Swivel angle of head-stock at level direction 360°. Spindle travel 3 3/8. Distance between spindle nose and table 17 5/16. Distance between spindle axis and surface of column 7 3/8. Spindle speed (1400r/min motor). Forward and backward travel of table 5 1/2. Left and right travel of table 16 1/8. Table size 27 9/16″ x 7 1/16″. Net weight 511.47 LBs. Base Dimensions: 13 1/2 L x 31″ 1/4″ W x 3″ D x 46″ Tall. Double-head wrench 19mm×22mm 1pc. Allen wrench 5mm, 6mm 1pc each. Screw driver(-) 150mm 1pc. CRATE SIZE: 28 1/8in x 28 1/8in x 40 1/4in. Bolton Tools ZX32G is a newer model for Bolton Tools, but it sure is a great price for a gear driven milling machine. Loaded with power for a 110v milling machine, the ZX32G shines with loads of torque and 6 different spindle speeds. Built with a rock solid dove tail column and a large table, the ZX32G is perfect for the beginner or experienced machinist. The R8 taper is the icing on the coke for this well built mill. Easy to operate and fun to use, the ZX32G will impress you and your machinist friends! If you have any questions regarding our products or services, please give us a chance for correction. Please do not leave a negative or neutral feedback. We will do our best to fix it. We care about our customers, and we strive to bring you the best customer experience ever. You will receive a response within 24 hours. Feed Back: If you are considering leaving negative or neutral feedback, please give us the opportunity to resolve the issue first. We will choose the appropriate carrier, according to the dimensions and weight of the product and recipient address. Our customer’s satisfaction is our main concern. All of our products are in brand new condition. The item “Bolton Tools 27 x 7 1/16 Bench Top Milling Machine Drill Free Shipping ZX32G” is in sale since Wednesday, January 25, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “boltontools” and is located in Cerritos, California. This item can be shipped to United States, to Canada.

• Brand: Bolton Tools
• MPN: ZX32G
• Model: ZX32G

Best ALB-310 Horizontal 110V/220V power feed. This is a new power feed for horizontal milling with 16mm/17mm end shaft. It include everything you need to install this power feed. It is a very useful power feed system for the X axis to provide a smooth, variable speed drive to the travers of the table. This will enable control of the cut finish to a much greater extent than achievable by hand. With simple controls for left/right movement, auto stop in any position on the table provided by movable stops, overload protection and a fast traverse button giving 40 per min speed. Simple to fit and powered by a standard 110V/220V plug, so no wiring is required. If item Defective after 12 Month, Buyers can still send it back for repair. The item “Best price! ALSGS ALB-310 Horizontal 110V 220V power feed milling free shipping” is in sale since Monday, August 29, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “88490755″ and is located in shenzhen, guangdong. This item can be shipped worldwide.

• Brand: ALSGS
• MPN: No have
• Model: ALB-310

This Listing is for a. This is a very high precision milling machine. There are no shortcuts taken with these machines, they are absolutely top of the line! Here are some features of this milling machine. High Grade Meehanite Castings, High Grade of Cast Iron, Meehanite / Grade 250 (FC250/HT250). Cast Iron, ribbed for rigidity and strength. Be sure to ask if comparing with others. This one is 1 phase, 220 Volts, If you need Single phase. Entire Milling Head and Main Motor are made in Taiwan – only very high quality units used on. Hardened and Ground table and way surfaces greatly reduces wear, which maintains accuracy, and greatly extends machine life. Box Ways on Y axis means more surface area, and more rigidity. Massive 20 Wide Saddle, for extra table support. Turcite B way material on X and Y Axis for smoother table movements and longer machine life. Compare with others, you will notice the feel right away in the table handles. Head Swivels Left and Right, AND Tilts Front To Back. One Shot Lubrication system is standard equipment, which also extends machine life, and reduces. Oiling times of all way surfaces and lead screws to seconds, it is accomplished by simply pumping. High precision Inch Pitch lead screws, for ease of use and greater accuracy (5TPI Screws). High Precision Spindle with +/. 0002 or less runout for greater tool life and accuracy. Balanced pulleys in head for smooth and quiet operation. Full featured head with automatic quill feeds in 3 steps for boring operations. Precision Honed Quill Bore for tighter tolerance fit, which leads to improved accuracy when. Drilling and precision boring. Power Down Feed on quill is standard, in 3 steps. 006 Inches per revolution. Quill is Precision Ground, then Hard Chrome Plated for even longer life. Available with either step pulley speed changes, or variable speeds to suit the user’s preferences. Built in coolant sump in machine base. Tolerance Test Certificate included, each machine is checked for accuracy through a careful. Quality machine that exceeds their expectations. Normal wear items such as belts, bushings, etc. Table Size 9x 50. X Axis Travel 30 with power Feed Installed, with Full Way Support (Not over-traveled past ends of ways). Y Axis Travel 12. Z Axis Travel (Knee) 18. Distance, Spindle to Table 18. Leadscrew Type Precision Ground ACME Leadscrew W/ Double Nut Backlash. Adjustments on X and Y Axis. 200 (5 Threads Per Inch). Spindle Speed Range 70- 4200 RPM (variable). Speed Change Type Variable Speed/ Hi-Low Lever. Spindle Bearing Type High Precision Tapered Roller Bearings, Fully Adjustable. Spindle Bearing Class C7. Overall Height, Head Up 87. Height with head down For moving. Depth Front to back, rear of machine to front of knee casting 46. Rear of machine to tip of Y axis handle 51. Width X Axis Table Handles, Tip to Tip 68. Machine Weight 2550 LBS. Voltage / Phase 220 Volt 1 Phase, 20 Amp Circuit. Average time delivered is 2-10 days depending on how far from Pittsburgh you are, it could be a little longer in remote places but normally is very fast. If you would like to stop in and see one in person, we are at. Quality Machine Tools, 701 Parkway View Drive, Pittsburgh, PA 15205. We are machinists here too, so we know what we sell. This is really a top quality machine, and will last a long, long time. AND we are here for support too. We sell these machines regularly, we know them inside and out, and have been in business for many years, so if there is any question, we can help. NO extra charge for residential or anything on these, as long as a truck can get to you, its covered. THIS MACHINE IS NOT ABLE TO BE DELIVERED WITH A LIFT GATE. Check out our other auctions for more lathes and mills. The item “PM-950V VERTICAL KNEE MILL MILLING MACHINE 3 AX DRO, X PWR, 1PH FREE SHIPPING” is in sale since Tuesday, January 03, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “qualitymachinetools” and is located in Pittsburgh, Pennsylvania. This item can be shipped to United States.

• Brand: Precision Matthews
• MPN: PM-950V
• Model: PM-950V-1PH

This Listing is for a. Features a DC Brushless Variable Speed Motor. And is BELT DRIVE for smooth and quiet operation! This machine uses 120V Standard Power! Here are some features of this milling machine. R8 Spindle Taper Standard, so it uses the most commonly available tooling. DC BRUSHLESS Variable Speed Motor, Powerful, Smooth and Reliable. Belt Drive from Motor to Spindle runs MUCH quieter than others, and eliminates any failure prone plastic gears. Main Colum is attached to the base with 4 bolts from the top, with a wide mounting surface for much more rigidity over other models in this size range. 3 Bolt Head Mount is now standard, for more rigidity when milling. 001 Readings on X and Y axis dials, with 10 threads per inch Leadscrews make it easier to cut accurately. Average time delivered is 2-7 days depending on how far from Pittsburgh you are, it could be a little longer in remote places but normally is very fast. DON’T FORGET TO CHECK OUT OUR ACCESSORIES THAT WE HAVE FOR THIS MACHINE INCLUDING R-8 COLLET SETS, 4 VISES, AND CLAMP KITS! Quality Machine Tools, 701 Parkway View Drive, Pittsburgh, PA 15205. We are machinists here too, so we know what we sell. This is really a top quality machine, and will last a long, long time. AND we are here for support too. We sell these machines regularly, we know them inside and out, and have been in business for many years, so if there is any question, we can help. Table Size 7-1/8″ x 27-1/2″. X Axis Travel 19. Y Axis Travel 7. Z Axis Travel (Head) 13. Max Drilling Capacity. Spindle Taper R8. Max Face Milling Capacity. 1/2″ (use 12mm or 7/16″ T Nut Clamping Kits to fit). Range of Spindle Speeds. Main Motor Horsepower – 1 HP. Voltage / Phase / Amps – 120 Volts, SINGLE Phase, 10 Amps. Approximate Machine Weight – 300 LBS. NO extra charge for residential or anything on these, as long as a truck can get to you, its covered. Check out our other auctions for more lathes and mills. The item “PM-25-MV VERTICAL BENCH TOP MILLING MACHINE, 3 YEAR WARRANTY FREE SHIPPING” is in sale since Wednesday, December 28, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “qualitymachinetools” and is located in Pittsburgh, Pennsylvania. This item can be shipped to United States, to Canada.

• Brand: Precision Matthews
• MPN: PM-25MV
• Country//Region of Manufacture: China

This Listing is for a. This is a very high precision milling machine. There are no shortcuts taken with these machines, they are absolutely top of the line! Here are some features of this milling machine. High Grade Meehanite Castings, High Grade of Cast Iron, Meehanite / Grade 250 (FC250/HT250). Cast Iron, ribbed for rigidity and strength. Be sure to ask if comparing with others. This one is 1 phase, 220 Volts, If you need Single phase. Entire Milling Head and Main Motor are made in Taiwan – only very high quality units used on. Hardened and Ground table and way surfaces greatly reduces wear, which maintains accuracy, and greatly extends machine life. Box Ways on Y axis means more surface area, and more rigidity. Massive 20 Wide Saddle, for extra table support. Turcite B way material on X and Y Axis for smoother table movements and longer machine life. Compare with others, you will notice the feel right away in the table handles. Head Swivels Left and Right, AND Tilts Front To Back. One Shot Lubrication system is standard equipment, which also extends machine life, and reduces. Oiling times of all way surfaces and lead screws to seconds, it is accomplished by simply pumping. High precision Inch Pitch lead screws, for ease of use and greater accuracy (5TPI Screws). High Precision Spindle with +/. 0002 or less runout for greater tool life and accuracy. Balanced pulleys in head for smooth and quiet operation. Full featured head with automatic quill feeds in 3 steps for boring operations. Precision Honed Quill Bore for tighter tolerance fit, which leads to improved accuracy when. Drilling and precision boring. Power Down Feed on quill is standard, in 3 steps. 006 Inches per revolution. Quill is Precision Ground, then Hard Chrome Plated for even longer life. Available with either step pulley speed changes, or variable speeds to suit the user’s preferences. Built in coolant sump in machine base. Tolerance Test Certificate included, each machine is checked for accuracy through a careful. Quality machine that exceeds their expectations. Normal wear items such as belts, bushings, etc. Table Size 9x 50. X Axis Travel 30 with power Feed Installed, with Full Way Support (Not over-traveled past ends of ways). Y Axis Travel 12. Z Axis Travel (Knee) 18. Distance, Spindle to Table 18. Leadscrew Type Precision Ground ACME Leadscrew W/ Double Nut Backlash. Adjustments on X and Y Axis. 200 (5 Threads Per Inch). Spindle Speed Range 70- 4200 RPM (variable). Speed Change Type Variable Speed/ Hi-Low Lever. Spindle Bearing Type High Precision Tapered Roller Bearings, Fully Adjustable. Spindle Bearing Class C7. Overall Height, Head Up 87. Height with head down For moving. Depth Front to back, rear of machine to front of knee casting 46. Rear of machine to tip of Y axis handle 51. Width X Axis Table Handles, Tip to Tip 68. Machine Weight 2550 LBS. Voltage / Phase 220 Volt 1 Phase, 20 Amp Circuit. Average time delivered is 2-10 days depending on how far from Pittsburgh you are, it could be a little longer in remote places but normally is very fast. If you would like to stop in and see one in person, we are at. Quality Machine Tools, 701 Parkway View Drive, Pittsburgh, PA 15205. We are machinists here too, so we know what we sell. This is really a top quality machine, and will last a long, long time. AND we are here for support too. We sell these machines regularly, we know them inside and out, and have been in business for many years, so if there is any question, we can help. NO extra charge for residential or anything on these, as long as a truck can get to you, its covered. THIS MACHINE IS NOT ABLE TO BE DELIVERED WITH A LIFT GATE. Check out our other auctions for more lathes and mills. The item “PM-950V VERTICAL KNEE MILL MILLING MACHINE 3 AX DRO, X PWR, 1PH FREE SHIPPING” is in sale since Tuesday, December 27, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “qualitymachinetools” and is located in Pittsburgh, Pennsylvania. This item can be shipped to United States.

• Brand: Precision Matthews
• MPN: PM-950V
• Model: PM-950V-1PH

This Listing is for a. Features a DC Brushless Variable Speed Motor. And is BELT DRIVE for smooth and quiet operation! This machine uses 120V Standard Power! Here are some features of this milling machine. R8 Spindle Taper Standard, so it uses the most commonly available tooling. DC BRUSHLESS Variable Speed Motor, Powerful, Smooth and Reliable. Belt Drive from Motor to Spindle runs MUCH quieter than others, and eliminates any failure prone plastic gears. Main Colum is attached to the base with 4 bolts from the top, with a wide mounting surface for much more rigidity over other models in this size range. 3 Bolt Head Mount is now standard, for more rigidity when milling. 001 Readings on X and Y axis dials, with 10 threads per inch Leadscrews make it easier to cut accurately. Average time delivered is 2-7 days depending on how far from Pittsburgh you are, it could be a little longer in remote places but normally is very fast. DON’T FORGET TO CHECK OUT OUR ACCESSORIES THAT WE HAVE FOR THIS MACHINE INCLUDING R-8 COLLET SETS, 4 VISES, AND CLAMP KITS! Quality Machine Tools, 701 Parkway View Drive, Pittsburgh, PA 15205. We are machinists here too, so we know what we sell. This is really a top quality machine, and will last a long, long time. AND we are here for support too. We sell these machines regularly, we know them inside and out, and have been in business for many years, so if there is any question, we can help. Table Size 7-1/8″ x 27-1/2″. X Axis Travel 19. Y Axis Travel 7. Z Axis Travel (Head) 13. Max Drilling Capacity. Spindle Taper R8. Max Face Milling Capacity. 1/2″ (use 12mm or 7/16″ T Nut Clamping Kits to fit). Range of Spindle Speeds. Main Motor Horsepower – 1 HP. Voltage / Phase / Amps – 120 Volts, SINGLE Phase, 10 Amps. Approximate Machine Weight – 300 LBS. NO extra charge for residential or anything on these, as long as a truck can get to you, its covered. Check out our other auctions for more lathes and mills. The item “PM-25-MV VERTICAL BENCH TOP MILLING MACHINE, 3 YEAR WARRANTY FREE SHIPPING” is in sale since Monday, November 28, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “qualitymachinetools” and is located in Pittsburgh, Pennsylvania. This item can be shipped to United States, to Canada.

• Brand: Precision Matthews
• MPN: PM-25MV
• Country//Region of Manufacture: China

This Listing is for a. This is a very high precision milling machine, made in Taiwan. There are no shortcuts taken with these machines, they are absolutely top of the line! Standard Equipment Included with Mill. Here are some features of this milling machine. Main High Quality Features. Industrial users looking for a top quality, bench type milling machine, built for industrial use. With a smaller size compared with a full sized mill, to save space. High end gunsmiths looking for a smaller bench type milling machine, who wish to maintain. The quality and features of a Taiwan made machine, but also want to save on space. Users who appreciate a high end, bench type milling machine with the space saving. Any other users who can appreciate a top quality machine with full features and no shortcuts, in. A smaller space-saving size, at a very reasonable price for the level of quality that you are purchasing. Head Swivels 90 degrees Left and Right for angled milling / drilling operations. Hand Scraped way Surfaces for better oil retention and fit, while leads to ultra smooth table. Movements, and very accurate movements. One Shot Lubrication system is standard equipment, which also extends machine life, and. Reduces oiling times of all way surfaces and lead screws to seconds, it is accomplished by simply pumping a lever. High precision Inch Pitch lead screws, for ease of use and greater accuracy (10 TPI Screws). High Precision Spindle with +/. 0002 or less runout for greater tool life and accuracy. Balanced gears in head for smooth and quiet operation, Hardened and Precision Ground for. Long life, and extremely quiet running for a geared head machine. Precision Honed Quill Bore for tighter tolerance fit, which leads to improved accuracy when. Drilling and precision boring. The Quill is Precision Ground, for higher accuracy. No belts to change, simply stop and move levers for speed changes, quick and easy. Tolerance Test check, each machine is checked for accuracy through a careful inspection. Average time delivered is 2-7 days depending on how far from Pittsburgh you are, it could be a little longer in remote places but normally is very fast. If you would like to stop in and see one in person, we are at. Quality Machine Tools, 701 Parkway View Drive, Pittsburgh, PA 15205. We are machinists here too, so we know what we sell. This is really a top quality machine, and will last a long, long time. AND we are here for support too. We sell these machines regularly, we know them inside and out, and have been in business for many years, so if there is any question, we can help. X Axis Travel 23-3/8. Y Axis Travel 11 (Compare with others of this size). Z Axis Travel (Head) 17-1/2. Distance, Spindle to Table 20-1/2. Leadscrew Type Precision Ground ACME Leadscrew W/ Double Nut Backlash Adjustments on X and Y Axis. 100 (10 Threads Per Inch). Spindle Speed Range 60-1500 RPM (6 steps). Speed Change Type: Shift Lever. Spindle Bearing Type High Precision Tapered Roller Bearings, Fully Adjustable. Spindle Bearing Class C5. Main Motor HP / Power 2 HP 1 PH. Overall Height, Head Up 88. Depth Front to back, rear of machine to front of knee casting 39-1/2. Rear of machine to tip of Y axis handle 34-5/8. Width X Axis Table Handles, Tip to Tip 41-3/4. Net Weight 1054 LBS. Voltage / Phase 220 Volt 1 Phase. Complete Base / Chip Tray with Storage Compartment. X Axis Power Feed. Z Axis Power Feed. One Shot Lubrication System. Fine Down Feed on Quill. Operator’s Manual and Parts List. NO extra charge for residential or anything on these, as long as a truck can get to you, its covered. Check out our other auctions for more lathes and mills. The item “PM-833T 8×33 VERTICAL MILLING MACHINE, 5 YEAR WARRANTY FREE SHIPPING TAIWAN” is in sale since Monday, November 07, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “qualitymachinetools” and is located in Pittsburgh, Pennsylvania. This item can be shipped to United States, to Canada.

• Brand: Precision Matthews
• MPN: PM-833T
• Country/Region of Manufacture: Taiwan